QUICK SETUP GUIDE

Before Installation

• This product may require cabling. It is highly recommended that all products and components be tested prior to installation.
• Fully charge your cameras overnight using the USB charger cable before installation.
• We don't recommend you set the camera to record continuously (24/7) because doing so may quickly deplete the battery (even on solar charging). We recommend you set it to record only when motion is detected. For how long does your battery last before it drains, refer to FAQ at the end of this manual.

Tech Support

For product introduction & specifications, please visit www.isansco.com. For FAQ, troubleshooting, or customer support, email us at support@isansco.com. We guarantee a reply within 24 hours.

FCC CLASS B NOTICE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio or television technician for assistance

This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this manual's guideline to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury. In order to improve the feature functions and quality of this product, the specifications are subject to change without notice from time to time.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

View on Your Mobile Phone (EseeCloud)

1. App Remote Viewing

1.1 Download the app EseeCloud

Download the EseeCloud app from the App Store, or Google Play. Note: Requires iOS 9.0 or above, Android 5.1 or above.

Search and download EseeCloud to your mobile phone from the App Store/Google Play. Or simply scan this QR Code to download: [QR Code for App Download]

Description of visual: An image showing the EseeCloud app icon and a QR code for downloading the app.

1.2 Register and Login

Step 1: On the app, press Register. Enter your Email or Phone Number, then press Confirm.

Step 2: Enter the Verification Code, and set up your Password. The password must be 6-20 characters long, using numbers, symbols, or letters, and distinguish capitalization.

Step 3: Go back to the login screen, enter your details and press Confirm to log in.

Description of visuals: Screenshots illustrating the app registration and login process. The first shows the registration screen with fields for email and a confirm button. The second shows the verification code input and password setup, including password requirements. The third shows the login screen with fields for credentials and a confirm button.

2. Add Device

Step 1: Press the [Add Device Icon] (top right corner) to add your device.

Step 2: Scan the Cloud ID of the camera.

Step 3: Enter the Password for the camera.

Step 4: Name the camera and press Confirm.

Description of visuals: A series of screenshots demonstrating the device addition process. This includes scanning a QR code on the device, entering the device password, and naming the device before confirming.

3. Live View & Playback on App

On the Device List, press the device thumbnail to enter the Live View interface, or press Playback to view the recorded footage.

Description of visual: The EseeCloud app interface showing a device list with an option to view live footage or playback recorded video. The live view displays the camera feed, and playback shows a timeline of recorded events.

How to Set up Push Alerts on Mobile Phone

On the App: Navigate to Live View > Setting > Push messages > App push alert message, and turn it on.

Description of visuals: Screenshots detailing the process of enabling push notifications on a mobile phone. This includes navigating through the app's settings menu and toggling the 'App push alert message' option. Separate instructions are provided for iPhone users (Settings > Notifications > EseeCloud > Allow Notifications) and Android users (Settings > Notifications & Status Bar > EseeCloud > Allow Notifications).

After this setup, you will receive real-time push alerts whenever motion is detected by the camera.

Some tips about installing the solar panel:

Description of visuals: Diagrams illustrating correct and incorrect solar panel placement. Incorrect placement shows a solar panel blocked by leaves and shadows (❌). Correct placement shows a clean solar panel being wiped with a cloth (✔️).

• Make sure the solar panel is not blocked by buildings, trees, or objects that may cast shadow on it.
• Do not install the solar panel horizontally to avoid the accumulation of dust and debris.
• Wipe the solar panel regularly to keep it clean and not obscured by dust or dirt.

FAQs

Question: Does the camera record sound?

Answer: Yes, the camera records sound as well as video. Each camera has a built-in microphone, allowing you to view what's happening and hear what's being said. At the bottom of each split window, click the [Speaker Icon] to mute or unmute audio.

Description of visual: The EseeCloud app interface showing camera feeds. It highlights the [Speaker Icon] for audio control and the [Microphone Icon] for speaking through the camera.

Question: Why does the battery drain so fast?

Answer:

1. Go to Recording Mode (Right click mouse > Camera Setup > Recording Mode), select "Best Recording". Do not use "Keep Recording".
2. Check the daily triggered alarm messages via the app (Event > Alarm Message). If there are too many false alarms, lower the motion sensitivity via Intelligent Detection Alarm Settings.
3. Check the signal strength of the camera. If the signal is too weak, try changing the camera position, fine-tuning the camera antenna, or setting up an Auto Repeater to improve signal transmission.

Description of visual: Diagrams illustrating battery life based on alarm frequency: 3-5 alarms/day provides approximately 180 days of battery life; 20 alarms/day provides approximately 30 days; 30 alarms/day provides approximately 20 days; and 50 alarms/day provides approximately 10 days.

Question: The night vision of my camera is terrible?

Answer:

1. Make sure not to aim your camera towards something directly in front of the lens.
2. Do not face the camera towards glass, mirrors, or reflective surfaces.
3. Do not face the camera lens towards direct lamps or sunlight.
4. Use ambient lighting to increase the overall lighting level.

Question: My camera is getting misty inside, is there a known fix?

Answer: This is likely due to condensation, which occurs in humid environments because of the temperature difference between the air and the camera's surface. In most cases, it will clear up on its own. However, if the condensation persists, please contact customer support for a replacement.

Certifications: CE, UKCA, FCC logos are displayed.

Country of Origin: Made in China