Installation Guide
PerfectFIT Venetian Blinds
made to measure, made simple
Assembling the frame
We've made a handy video version of this fitting guide, just click the play button to view it. If you prefer to print the instructions or simply to follow step-by-step, just keep reading.
Unpack the blind and frame (the side frames are packed separately in the same box), then lay out all the parts to ensure no cords are tangled.
Before you slot the frames together, clip the corner cover pieces onto the corner joints so that they're firmly attached.
Attach the side frames to the top and bottom by inserting the pegs on each corner section into their corresponding channels in the frames. Press the pegs firmly into place, the tension in the blind's cords will hold the frame together once fully assembled.
Diagram Description: The diagram shows the four frame pieces and how they connect. Corner pieces with pegs are attached to the frame corners. Arrows indicate the pegs being inserted into the frame channels.
Installing the brackets
Locate the correct position for the brackets by holding a credit card or store card vertically in the corner of the glass - the bracket will sit in line with the edge of the card.
Diagram Description: The diagram shows a credit card placed vertically in the corner of a window pane, indicating the correct position for the bracket. Another diagram shows a bracket being aligned with the edge of the glass.
Installing the blind
Line the assembled blind up with the brackets so that the centre prong of the bracket is aligned with the oval slot on the frame. Ensure that the frame is sitting on the inside edge of each of the brackets (between the bracket and the glass).
Push the frame towards the window until the oval slots lock onto the prongs of each of the brackets. The installation of the blind is now complete.
Diagram Description: The diagram shows the blind frame being aligned with the brackets. An enlarged view shows the oval slot on the frame locking onto the prong of the bracket. Arrows indicate the direction of the push to secure the frame.
