Energizer UB2607 True Wireless Earbuds
Product Overview and User Guide
Product Introduction
This document provides an introduction to the Energizer UB2607 True Wireless Earbuds. The product includes a charging case with an LCD indicator, a micro USB charging port, and a power button. The earbuds feature multi-function buttons (MFB) and LED indicators.
Specifications
| Specification | Details |
|---|---|
| Model Name | UB2607 |
| Cell Type | Lithium Ion |
| Battery Capacity (Case) | 2600mAh / 9.62Wh |
| Single Earbud Capacity | 40mAh |
| Rated Input | 5V / 0.5A (Max.) |
| Rated Output (Case) | 5V / 1A (Max.) |
| Bluetooth Version | 5.0 |
| Impedance | Φ6mm 16Ω |
| Transmission Distance | 10M |
| Frequency Range | 20Hz~20KHz |
| Protocols | HSP/HFP/A2DP/AVRCP |
| Dimensions (Case) | 72(L) x 48(W) x 32(H) mm |
| Weight (Case) | 85g ± 5g |
Package Content
- Charging case
- Energizer earbuds
- Gel tips x 3 (total 3 pairs)
- User manual
- Charging cable
How to Use
Power On/Off
The earbuds will turn on automatically when taken out of the charging case. To turn them on manually, long press the MFB button for 2 seconds. To turn them off, place the earbuds back into the case; they will power off automatically. For manual power off, long press the MFB for 4 seconds until the red indicator light turns off. If both earbuds are connected, pressing the MFB on one earbud will turn both off simultaneously.
LED Light Indicator
| Status | Earbuds LED Indicator |
|---|---|
| Pairing Mode | Flashing blue and red light |
| Earbuds Connected | One earbud flashes blue and red; the other flashes blue 1 time every 5 seconds. |
| Phone Connected | Both earbuds flash blue 1 time every 5 seconds. |
| Battery Low | Flashing red |
| Charging | Red light on |
| Charging Finished | Blue light on for 1 minute then shuts off. |
Battery Level Indicator
The charging case displays battery levels for:
- Left Earbud Battery Level
- Charging Case Battery Level
- Right Earbud Battery Level
Pairing Instructions
Take the two earbuds out of the box; they will automatically pair with each other. One earbud will flash blue, and the other will flash blue and red, indicating pairing is complete.
On your phone, turn on Bluetooth and connect to "Energizer_UB2607". Once connected, open your music player app to enjoy wireless music.
Auto-Connect
Ensure Bluetooth is enabled on your phone. Turn on the earbuds, and they will automatically connect to the last paired phone device.
Clear Pairing History
With the earbuds powered on, double-tap and then long-press the MFB until the LED flashes red and the earbuds power off. Place the earbuds back into the charging case and then remove them to initiate pairing again.
Charging
Recharging the Case
Connect the provided charging cable to the charging case and then to a power outlet or USB power source.
Charging Your Smartphone
The charging case features a DC 5V / 1A USB output that can be used to charge your smartphone.
Compliance and Safety Information
RF Exposure Compliance Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) This marking on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent harm to the environment or human health from uncontrolled waste disposal, please separate this from other waste types and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their supplier and check purchase contract terms. Do not mix with other commercial wastes for disposal.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Safety Instructions
- Avoid water, heat, fire, penetration of the battery, and severe drops at all times.
- Do not insert other objects into the USB ports other than the USB connectors.
- Once the product is fully charged, the power pack automatically shuts off to save power.
- During charge & recharge, the battery may feel slightly warm.
- Do not clean the battery with water or other cleaning products; clean the exterior with a lightly wetted cloth or napkin.
- Any intentional and physical damage to the battery will not be under the warranty conditions.
- Battery storage temperature is between -10°C to +60°C; operating temperature is 0°C to 45°C.
- Fully charge the battery before first use to maximize battery life.
- It is recommended to recharge your power bank with a wall charger/adapter.
- For better performance, avoid recharging the power bank while your device is connected to it.
- Dispose of battery properly; ask your local disposal facility for advice.
- Do not disassemble, damage, or incinerate the battery at any time.
- Please use the original accessories such as the charging cable and adapter for better performance.
Warranty and Support
All products from the date of purchase are qualified for limited time warranty. For more warranty information, please visit: http://www.energizerpowerbanks.com.
PowerSafe Management: Guarantees against short circuit and over-charging for your power bank and devices. ⚡
Customer Service: For any question about the product, please contact us at service@energizerpowerbanks.com.
