Energizer QE20008PQ Power Bank

Specifications

Model Name: QE20008PQ

Cell Type: Lithium Polymer

Battery Capacity: 20000mAh/74Wh (Max.)

Rated Input: Micro USB 5V/2A

Rated Input: USB-C PD 5V/2A, 9V/2A

Rated Output 1: USB-A 5V/3A, 9V/2A, 12V/1.5A

Rated Output 2: USB-C PD 5V/2A, 9V/2.22A, 12V/1.5A

Wireless Output: 5W/7.5W/10W/15W

Total Output: 20W (Max.)

Dimensions: 148(L) x 70.5(W) x 28.5(H) mm

Weight: 430g ± 10g

Package Contents

• 1 QE20008PQ
• 2 User Manual
• 3 Charging Cable

Safety Instructions

• Avoid water, heat, fire, battery penetration, and severe drops.
• Do not insert objects other than USB connectors into USB ports.
• The power pack automatically shuts off when fully charged to save power.
• The battery may feel slightly warm during charge and recharge.
• Clean the exterior with a lightly wetted cloth or napkin; do not use water or other cleaning products.
• Battery performance may decline after 2 years.
• Intentional or physical damage to the battery is not covered by warranty.
• Battery storage temperature: -10°C to +60°C. Operating temperature: 0°C to 45°C.
• Fully charge the battery before first use to maximize battery life.

How to Use

Wireless Charging: Compatible with wireless charging standards.

For wireless charging: Press the power button once to activate wireless charging. Fast charge (via cable) will switch to normal charging mode. After 2 minutes of idle, wireless charging will shut off, and fast charge will resume.

Recharge Mode:

A blinking light indicates recharging. A solid light indicates the battery is fully charged.

For fast charge, please charge only one device at a time. Do not charge more than 2 devices simultaneously.

Power Check Button: Press to check the power level.

Adapter NOT included.

To recharge the power bank, connect the micro-USB or USB-C end to the input port.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.