Energizer BTS566 Tailgate Bluetooth Party Speaker

Product Overview

This document provides comprehensive instructions for the Energizer BTS566 Tailgate Bluetooth Party Speaker. Please read all instructions carefully before use.

Safety Instructions

• Avoid water, heat, fire, penetration of the product, and severe drops at all times.
• Do not insert other objects into ports other than the original assigned connectors.
• Do not clean the product with water or other cleaning products; clean the exterior with a lightly wet cloth or napkin.
• Any intentional and physical damage to the product will not be under the warranty conditions.
• Fully charge the battery before first use to maximize battery life.

To increase battery life efficiency, please respect the following points:

• Turn off the speaker before charging.
• Connect the charger socket to the speaker first, then plug in the adapter.
• On the first usage, the speaker may turn off before the first discharge process and during music playing time. For two or more times, restart the speaker to play music until the battery is fully discharged. This means the battery is fully discharged when the charging light turns red or the charging indicator is minimized (depending on the model). Then charge the battery for 7-8 hours until the charging light turns green.
• It is strongly recommended not to charge the battery for more than 8 hours.

Specifications

Package Contents

• Bluetooth Speaker Energizer_BTS566
• DC 12V, 1.5A UK Adapter
• DC 12V, 1.5A EU Adapter
• AUX Cable
• Remote Control
• User Manual
• Wireless Microphone

Note: Based on user activities, using LED light effects and microphone connection or other multi-functions may also affect playtime duration.

Operation Instructions

Bluetooth Connection

Turn on the speaker to enter Bluetooth mode. Then, turn on Bluetooth on your device and search for the speaker's Bluetooth name: Energizer_BTS566 for pairing. If prompted for a password, enter "0000" and confirm connection.

TWS Connection

When in Bluetooth mode, short press the [TWS Button] on both speakers to pair them. A notification sound indicates TWS is connected. Long press to disconnect TWS. The optimal connection distance between two Bluetooth speakers is about 5 meters.

When using the TWS function, place the two speakers horizontally in the same direction. [TWS Symbol]

Bluetooth Internal Recording

1. Insert a TF card or USB drive, then switch to Bluetooth mode.
2. Play music on your device.
3. Insert the wired microphone or connect to a wireless microphone.
4. Short press the [Record Button]; Bluetooth internal recording will start.
5. Short press the [Record Button] to finish the internal recording and play the recorded file.

Controls and Features

Appearance and Key Instructions:

• [Light Button]: Short press to turn on the color light, long press to turn off the color light.
• [Previous Track Button]: Short press to switch to the previous song.
• [Next Track Button]: Short press to switch to the next song.
• [Power Button]: Power on/off.
• [Mode Button]: Short press to switch between Bluetooth, TF card, AUX, USB drive. Long press to switch to TWS.
• [EQ Button]: Short press to switch between two sound effects (EQ1 for indoor, EQ2 for outdoor).
• [Play/Pause Button]: Short press to play or pause. In Bluetooth mode, long press to disconnect Bluetooth.
• [Repeat Button]: Short press to switch between repeat one song or repeat the playlist. Long press to turn on or off the microphone priority function.
• [Microphone Volume Knob]: Turn left to decrease microphone volume, right to increase.
• [Reverb Slider]: Slide up to increase reverb volume, down to decrease.
• [Instrument Slider]: Slide up to increase instrument volume, down to decrease.
• [Treble Slider]: Slide up to increase treble volume, down to decrease.
• [Bass Slider]: Slide up to increase bass volume, down to decrease.
• [Volume Knob]: Slide up to increase overall volume, down to decrease.
• [Guitar Input]: Connect an instrument to play.
• [MIC Input]: Insert a wired microphone to sing.
• [AUX Input]: AUX audio input.
• [USB Port]: Insert USB drive for MP3 music (Max capacity: 64 GB; above 64 GB may not work).
• [TF Card Slot]: Insert TF card for MP3 music (Max capacity: 64 GB; above 64 GB may not work).
• [USB Output Port]: Connect another USB device using a compatible USB cable to begin charging.
• [DC IN Port]: Recharge the battery with an adapter.
• [Charging Indicator]: Red light is on during charging; turns off when fully charged, and the green light turns on.
• [LED Display Screen]: Displays information.
• [Built-in Battery Compartment]: For replacing the No. 5 battery (for wireless microphone).

Charging Instructions

• To protect battery performance, avoid using the speaker while charging.
• Please use the included 12V 1.5A adapter for recharging.
• The red light indicates charging; it turns off and the green light turns on when fully charged.

Special Sound Effects

1. Screaming Sound Effect
2. Applauding Sound Effect
3. Whistling Sound Effect
4. Kissing Sound Effect
5. Hitting/Slapping Sound Effect
6. Gun Firing Sound Effect
7. Booing Sound Effect

Remote Control

Schematic Diagram and Operation Instructions:

• Use within 6 meters and 30 degrees from the device receiver.
• Aim at the speaker's receiving window; ensure no obstacles.
• Avoid strong sunlight on the receiving window, as it may cause malfunction.
• Replace the battery when it is depleted. Check batteries regularly.

Remote Control Buttons (Visual Description):

• [Recording LED Atmosphere Light Button]
• [Sounds Button]
• [Previous Songs Button]
• [Volume Down Button]
• [Microphone Priority Button]
• [Repeat Function Button]
• [Mode Button]
• [Volume Up Button]
• [Next Songs Button]
• [Microphone Volume Up Button]
• [Original Sound Button]
• [0-9 Number Buttons]
• [Microphone Volume Down Button]
• [Indoor/Outdoor Sound Switch Button]

Troubleshooting

• Automatically shuts down when turned on: Battery is low; please charge fully.
• Player automatically shuts down or restarts: Battery is low; please charge fully.
• Charging light is not on, not charging: Check adapter connection or damage. Use a 12V-1.5A adapter.
• Bluetooth status is silent: Check Bluetooth pairing and ensure connected device volume is not at minimum.
• TF card/USB drive playback is silent: Check TF card insertion, USB drive connection, music format (MP3, WMA supported), and device volume.
• Recording doesn't work: Check TF card/USB drive space. Ensure recording mode is TF card or USB drive, and a wired microphone is inserted.
• Recording cannot be deleted: Long press the record button while playing the recording file, or connect to a computer to delete.
• Recording sound is low or has noise: Use a wired or wireless microphone when recording.

IC Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Wireless microphone operation:

• Long press to power ON/OFF.
• Display flickers slowly when not connected; stops flashing and shows a steady state when connected. Blinks quickly when battery is low.
• When wireless microphone battery is dead, twist the microphone to the left and replace the No.5 AA battery. Pay attention to polarity.
• Howling: Do not place the microphone close to the speaker. Try placing it further away or behind the speaker, or turn down the microphone volume.
• Low microphone volume/No microphone volume: Ensure the microphone volume is turned up to the maximum.

Customer Service

For any questions about the product, please contact Energizer at service@energizerpowerpacks.com.