Parts and Hardware
- 1x Allen Key (Part No. 130445)
- 1x Wrench (Part No. 128632)
- 4x Bolt (Part No. 10092125)
- 4x Bolt (Part No. 106675)
- 4x Bolt (Part No. 110538)
- 4x Bolt (Part No. 10092367)
- 4x Washer (Part No. 10092385)
- 4x Washer (Part No. 10092369)
- 4x Clip (Part No. 10092295)
- 16x Clip (Part No. 10092615)
- 1x Ring Component (Part No. 10092372)
- 1x Ring Component (Part No. 10092389)
- Legs (4x)
- Frame Rails (various)
- Table Slats (approx. 39x)
Assembly Instructions
Step 1
Prepare the frame components. The diagram shows two people assembling the base. It illustrates correct part orientation and a warning against incorrect assembly. Four (4x) clips (Part No. 10092615) are used to connect frame pieces.
Step 2
Continue assembling the frame. The diagram shows connecting frame parts using clips (Part No. 10092615). A warning symbol indicates incorrect assembly.
Step 3
Attach the legs. Insert four (4x) legs into the frame corners. Secure each leg with one (1x) bolt (Part No. 106675) and one (1x) washer (Part No. 110538), tightened using the provided wrench (Part No. 128632). A warning symbol indicates incorrect tightening.
Step 4
Attach support rails. Insert two (2x) support rails into the frame. The diagram shows using clips (Part No. 10092295) and a specific insertion method.
Step 5
Attach more support rails. The diagram shows attaching more support rails to the frame, possibly using the same clip mechanism. Two people are shown in the diagram.
Step 6
Insert table slats. Place eight (8x) table slats into the frame. The diagram shows the slats sliding into place and a measurement of 5 mm (1/5 inch) for spacing.
Step 7
Insert more table slats. Place fourteen (14x) table slats into the frame. The diagram shows them sliding into place and a measurement of 80 mm (3 1/6 inches) for positioning.
Step 8
Insert more table slats. Place one (1x) table slat into the frame. The diagram shows it sliding into place and a measurement of 25 mm (1 inch) for positioning.
Step 9
Insert the final table slat. Place one (1x) table slat into the frame. The diagram shows it sliding into place. A warning symbol indicates incorrect placement.
Step 10
Secure table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats. A "Click!" sound is indicated, signifying secure attachment.
Step 11
Secure more table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats on another section of the table. A "Click!" sound is indicated.
Step 12
Insert table slats. Place three (3x) table slats into the frame. The diagram shows the slats sliding into place and a close-up of the interlocking mechanism.
Step 13
Secure table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats. A "Click!" sound is indicated.
Step 14
Insert table slats. Place three (3x) table slats into the frame. The diagram shows the slats sliding into place and a close-up of the interlocking mechanism.
Step 15
Secure table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats. A "Click!" sound is indicated.
Step 16
Insert table slats. Place three (3x) table slats into the frame. The diagram shows the slats sliding into place and a close-up of the interlocking mechanism.
Step 17
Secure table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats. A "Click!" sound is indicated.
Step 18
Insert table slats. Place three (3x) table slats into the frame. The diagram shows the slats sliding into place and a close-up of the interlocking mechanism.
Step 19
Secure table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats. A "Click!" sound is indicated.
Step 20
Insert table slats. Place three (3x) table slats into the frame. The diagram shows the slats sliding into place and a close-up of the interlocking mechanism.
Step 21
Secure table slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure slats. A "Click!" sound is indicated.
Step 22
Insert the final table slat. Place one (1x) table slat into the frame. The diagram shows it sliding into place.
Step 23
Final check of the table structure. The diagram shows a close-up of the table edge and a hand indicating a secure fit. It also includes a warning symbol for incorrect placement.
Step 24
Secure the final slats. The diagram shows two (2x) clips (Part No. 10092295) being used to secure the last set of slats. A "Click!" sound is indicated.
Step 25
Install the umbrella hole cover. Place the ring component (Part No. 10092372) and then the cover (Part No. 10092389) into the central hole of the table. The diagram shows the parts being inserted and fitting together.
