Richmat 豪江
HANDSET
HJH124 Ble
Product Overview
This document provides information about the Richmat HJH124 Ble handset, a remote control for adjustable beds.
Remote Control Dimensions
Front View: Height 140mm, Width 50mm, Thickness 18mm
Side View: Thickness 17.4mm
Back View: Width 50.3mm
3. Remote Control Button Diagram
The handset features the following buttons:
- 1. HEAD UP ⬆️
- 2. FOOT UP ⬆️
- 3. HEAD DOWN ⬇️
- 4. FOOT DOWN ⬇️
- 5. M1 (Memory Position 1)
- 6. M2 (Memory Position 2)
- 7. FLASHLIGHT ?
- 8. FLAT ?️
4. Remote Control Function Description
| Button Label | Function |
|---|---|
| 1 | The head motor extends. |
| 2 | The foot motor extends. |
| 3 | The head motor retracts. |
| 4 | The foot motor retracts. |
| 5 | The motor runs to the M1 position (with an initial value) with one key. Multiplexing function: flashlight + M1, the backlight flashes twice, entering the one-key release mode can reset the memory positions of M1 and M2 to the factory default settings at the same time. |
| 6 | The motor runs to the M2 position with one key (there is an initial value). |
| 7 | Press the flashlight to light up and automatically turn off after 15s. Multiplexing function: press and hold the flashlight button for 5 seconds, the backlight flashes, release the flashlight, press M1 or M2 within 2 seconds, the control box "beep beep beep" will memorize the current position, if not press M1 or within 2 seconds M2 exits the edit memory position mode. |
| 8 | FLAT one-key reset, all motors retract to the minimum stroke position (not reset after power-on). Multiplexing function: press FLAT and flashlight at the same time for 3s, the backlight flashes 3 times, and enter the continuous pressing mode at this time. |
Note: Press any button for more than 50s, the remote control will enter sleep, release it and press it again to resume the function. The one-key release mode can follow the synchronization, and the continuous pressing mode does not follow the synchronization.
Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Related Documents
 |
Richmat HJH55 Ble Bed Handset User Manual and Functions Comprehensive user guide for the Richmat HJH55 Ble remote control, detailing button functions, operation, pairing procedures, dimensions, and FCC compliance information for adjustable beds. |
 |
Richmat HJC9G Ble Control Box User Guide User guide for the Richmat HJC9G Ble control box, detailing its features, dimensions, system configuration, remote control functions, and pairing instructions for adjustable beds. |
 |
HJSR96 Ble Remote Control: Functions and Operation Guide Comprehensive guide to the HJSR96 Ble remote control, detailing functions for adjustable beds, including button descriptions, coding methods, Bluetooth pairing, and FCC compliance information from Qingdao Richmat Intelligence Technology Inc. |
 |
Richmat HJH173 Ble Bluetooth Handset for Adjustable Beds | User Guide & Specifications Explore the Richmat HJH173 Ble Bluetooth Handset, a remote control for adjustable beds. Learn about its features, technical specifications, and FCC compliance for optimal use. |
 |
Internal Photographs of Richmat BLE Remote Controls - Models HJH124, HJH55B, HJSR06, HJH109 This document provides detailed internal photographs of various Richmat Bluetooth Low Energy (BLE) remote control models, including HJH124 BLE, HJH55B Ble, HJSR06 Ble, and HJH109 Ble. The images showcase the internal circuit board layouts and components, accompanied by ruler measurements for scale. Report Number: EED39N81438804. |
 |
Richmat HJC25C Control Box User Manual This document provides information and specifications for the Richmat HJC25C control box, including its features, dimensions, system configuration, and remote control functions. It also includes FCC compliance information. |
 |
Richmat HJH159 Ble Smart Home System: Product Function Manual Comprehensive guide to the Richmat HJH159 Ble smart home adjustable bed system, detailing remote control functions, system configuration, component list, pairing, and operational instructions. Includes FCC compliance information. |
 |
Richmat HJH163 Ble Smart Home Remote Control User Manual Comprehensive user manual for the Richmat HJH163 Ble smart home remote control, detailing button functions, operation, coding, precautions, and FCC compliance. |