BLÅVINGAD
IKEA Design and Quality IKEA of Sweden
Important Safety Information
General Warnings
⚠️WARNING! CAUTION - ELECTRICALLY OPERATED PRODUCT. Not recommended for children under 3 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.
For indoor use only.
Strangulation Hazard
⚠️WARNING – Strangulation hazard. NEVER place cord within reach of the child in a crib, playpen or toddler bed. ALWAYS secure cord to wall. Check regularly that the cord is securely fastened. Pull the cord to remove any slack between switch and both fasteners. Tie up any remaining slack cord between fastener and socket. Please see illustration of how to secure cord to wall further on in this document.
Cleaning Instructions
Use a damp cloth, never a strong cleaning agent.
Technical Information
120VAC Max21mA 60Hz
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Installation Notes
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
Assembly Instructions
Parts List
- 1x Wall mount base (Item 10091466)
- 3x Cable clips (Item 158671)
Step-by-Step Guide
- Step 1: Mount the base.
Attach the wall mount base (10091466) to the wall using appropriate screws and wall plugs for your wall material. (Diagram shows a screw being inserted into the wall mount base).
- Step 2: Connect the power.
Connect the product's cord to the power adapter/transformer.
- Step 3: Plug in.
Plug the power adapter/transformer into a wall socket ?.
- Step 4: Attach the product.
Secure the turtle product to the mounted base. A click sound ? will indicate it is properly attached. (Diagram shows the turtle product being attached to the base, with a magnified view of the locking mechanism engaging).
- Step 5: Secure the cord.
Attach the first cable clip (158671) to the cord and then to the wall. Use screws suitable for your wall type (Max screw diameter 3.2 mm / 1/8"). (Diagram shows a cable clip being attached to the cord, and a screw being inserted through the clip into the wall).
- Step 6: Secure the cord.
Attach the second cable clip (158671) to the cord and then to the wall.
- Step 7: Secure the cord.
Attach the third cable clip (158671) to the cord and then to the wall.
- Step 8: Final setup.
The cord is now secured along the wall, and the product is mounted and powered. (Diagram shows the complete installation with the product mounted, cord secured, and adapter plugged in).
