BLÅVINGAD LED Wall Lamp

Model: V2103

Important Safety Instructions

⚠️ WARNING – Strangulation hazard.

For indoor use only.
NEVER place cord within reach of a child in a cot or playpen.
ALWAYS secure cord to the wall.
Check regularly that the cord is securely fastened.
Pull the cord to remove any slack between the switch and fasteners.
Tie up any remaining slack cord between fastener and socket.

Regularly check the cord, transformer, and all other parts for damage. If any part is damaged, the product should not be used.

Important information! Keep these instructions for future use.

Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.

This product contains a light source of energy efficiency class F.

Parts Included

1x Circular mounting plate (Part #10091466)
3x Triangular wall clips (Part #158671)
3x Triangular wall clips (Part #158671)

Assembly Instructions

Step 1: Wall Mounting Preparation

Attach the circular mounting plate to the wall. Use screws and wall plugs appropriate for your wall type. Ensure the screw diameter does not exceed 3.2 mm (1/8"). Avoid using incorrect screw types (❌).

Diagram Description: Shows a hand inserting a screw into a wall clip, with a note about maximum screw diameter. A crossed-out screw is shown to indicate an incorrect type. The circular mounting plate is shown being positioned on the wall.

Step 2: Connect Power Adapter

Connect the power adapter cable to the transformer unit.

Diagram Description: Close-up view showing the power connector being plugged into the transformer.

Step 3: Plug into Outlet

Plug the transformer unit into a wall power outlet.

Diagram Description: Shows the transformer unit being plugged into a standard wall socket.

Step 4: Attach Lamp to Plate

Attach the BLÅVINGAD turtle lamp to the mounted circular plate. Push the lamp onto the plate until it clicks securely into place (2x).

Diagram Description: Shows the turtle lamp being aligned with and pushed onto the mounting plate. An inset highlights the locking mechanism and the audible "Click!" sound.

Step 5: Secure Power Cord to Wall

Begin securing the power cord to the wall using the provided triangular clips. Insert screws (Max Ø 3.2 mm / 1/8") into the clips and attach them to the wall.

Diagram Description: Shows a hand attaching a wall clip to the wall with a screw. The power cord is positioned to be secured by the clip.

Step 6: Continue Securing Cord

Continue attaching clips along the power cord's path to the wall, ensuring it is kept tidy and secure.

Diagram Description: Shows more clips being attached to the wall to secure the power cord.

Step 7: Further Secure Cord

Continue securing the power cord to the wall with additional clips as needed to maintain a neat and safe installation.

Diagram Description: Illustrates the process of securing the power cord to the wall with clips.

Step 8: Final Setup

The power cord is now secured along the wall and plugged into the power outlet, completing the installation.

Diagram Description: Shows the final setup with the power cord running along the wall, secured by clips, and plugged into a wall socket.

General Warnings & Product Information

⚠️ Safety First: Always prioritize safety when installing and using this product. Ensure all parts are securely fastened and the cord is managed safely to prevent hazards.

Diagram Description: Depicts unsafe cord placement scenarios (e.g., cord accessible to children, dangling loosely) marked with a cross ❌.