Hilti MSG-D 200 1.5 M12 / M16 Installation Guide
Document Number: 2178687-02.2022
Installation Steps
Step 1: Component Preparation
Ensure you have the following components:
- 1x MQ
- 2x M12 / M16
- 2x MQM-M10
- 2x M10x25 A 10.5/20
Diagram Description: Shows the basic components laid out, including a mounting rail (MQ), pipe clamps (M12/M16), and various screws and bolts.
Step 1a: Attaching Components
Attach the components to the mounting rail as shown. Ensure a torque of 20 Nm (15 ft-lb) is applied.
Diagram Description: Illustrates the connection of the pipe clamp assembly to the mounting rail using screws and washers, with a torque specification indicated.
Step 2: Securing the Pipe
Position the pipe and secure it using the provided clamps and fasteners.
Required Fasteners:
- 2x HST2 M10/90 / HST3 M10/90 / HUS3-H 8x55/-/55 (#2079794)
- HUS4-H 8x55 (#2293135)
- 2x M12 / M16
Diagram Description: Shows a pipe being held by a clamp assembly attached to a mounting rail. Fastener types and quantities are listed.
Step 2a: Drilling and Fastening
This step involves drilling into a concrete surface and fastening the mounting system. Follow the visual guide for precise placement and fastening.
Diagram Description: Depicts drilling into a concrete wall (indicated by a drill bit symbol), followed by the insertion of anchors and the attachment of the mounting bracket. Checkmarks indicate correct installation.
Installation Examples
The following diagrams show various installation scenarios and correct mounting practices:
Ceiling Mount (Horizontal Pipe)
Diagram Description: Shows a pipe suspended from a ceiling using a mounting system. Dimensions of 100 mm spacing are indicated. A red box with an exclamation mark symbol suggests caution or a specific instruction.
Wall Mount (Vertical Pipe)
Diagram Description: Illustrates a pipe mounted vertically on a wall using brackets and fasteners. Several examples show correct attachment with checkmarks (✔️) and one incorrect attachment with a cross (❌).
Multiple Pipe Installation
Diagram Description: Shows multiple pipes being supported by a single mounting rail system, attached to a ceiling structure. Checkmarks indicate correct installation.
Concrete Structure Mount
Diagram Description: Depicts the mounting system attached directly to a concrete surface, with fasteners secured into the concrete. Checkmarks indicate correct installation.
