This document provides the general construction technique permit (Allgemeine Bauartgenehmigung) for the Hilti HUS4 concrete screw, designed for temporary fastening applications in concrete. It details the product's subject matter, field of application, planning, design, and execution requirements, including installation parameters, material specifications, and design resistances for various load conditions. The permit is issued by the Deutsches Institut für Bautechnik (DIBt).
Detailed installation guide and technical specifications for the Hilti HUS4-H(F) 16 G02 concrete screw anchor, including product variants, dimensions, and approved accessories.
Step-by-step instructions for installing Hilti SI-AT-22 screw anchors using Hilti tools and HUS4-H 10x90 anchors, detailing preparation, driving, and verification.
A whitepaper for planners and structural engineers detailing the Hilti HUS4 bonded screw fastener with Hilti HUS4-MAX capsule, a novel anchoring technology combining mechanical and chemical fastening benefits.
This document outlines the Declaration of Performance for the Hilti HUS4 screw anchor, detailing its technical specifications, intended uses, and compliance with relevant regulations for mechanical resistance, stability, and safety in case of fire.
Comprehensive installation guide and technical specifications for the Hilti HUS4-A(F) 14 concrete anchor, including dimensions, hole preparation, and compatibility information.
This guide provides detailed instructions for the installation of the Hilti HUS4-H(F) 10 anchor, including pre-drilling, cleaning, and setting procedures for various base materials and applications. It covers required tools, dimensions, and performance specifications.
This document provides the European Technical Assessment for the Hilti HUS4 concrete screw, detailing its technical specifications, performance, and intended use in construction.