MiCODUS MV66 User Manual V1.0

Learn how to set up your new MiCODUS Tracker

1. Main Features

Compact Size
Plug & Play
Real-time Tracking
Historical Route Playback
Overspeed Alarm
Engine On/OFF Alarm
Shift Alarm
Vibration Alarm
Geo-fence
Plug Out Alarm
Low Voltage Alarm
Voice Monitor

2. Specifications

Device Information

Model	MV66
Weight	30g
Dimensions	48.2mm(L) * 28.6mm(W) * 29.1mm(H)
Backup Battery	3.7V 60mAh Li-Polymer Battery

Working Parameters

Working Voltage	DC 9V - 35V
Working Current	12V/45mA
Sleep Current	12V/8mA
Working Temperature	-20 °C - 75 °C
Working Humidity	5%-95%RH

Cellular Specifications

Communication Module	QUECTEL MC25
SIM Card	Micro Size
Cellular Antenna	Built-in
Working Frequencies	2G GSM/GPRS: 850/900/1800/1900MHz

GNSS Specifications

GNSS	GPS+BDS
Satellite Channels	32
GPS Frequencies	L1: 1575.42±1.023MHz
BDS Frequencies	B1: 1561.098±2.046MHz
Hot/warm/cold Start	<1s, <32s @ Open Sky
Tracking sensitivity	-162dBm
GNSS Antenna	Built-in Ceramics GNSS Antenna, 18mm18mm4mm
Positioning Type	GNSS+LBS+AGPS
Accuracy	GNSS Accuracy: <10M @ Open Sky LBS Accuracy: 100-2000m (Depend on density of base stations)

3. Activate Device

First Step: Prepare and Install SIM Card

If using a local SIM card, ensure it has SMS, internet data traffic, call, and caller ID display functions enabled.

If using a MiCODUS SIM card, recharge it at www.spionlink.com to get a data plan.

SIM Card Types:

Nano SIM
Micro SIM
Normal SIM

An image displays the different SIM card sizes and a device for inserting them.

LED Indicators

LED	Event	State
POWER LED (RED)	Charging	Solid
POWER LED (RED)	Charger inserted and battery has been fully charged	Dark
	Charger has not been inserted	Dark
CELL LED (YELLOW)	Searching for network	Flash every 1 second
CELL LED (YELLOW)	Network has been registered	Solid
GPS LED (BLUE)	GPS is in fixing	Flash every 1 second
GPS LED (BLUE)	GPS has fixed	Solid
ALL LED	Device is working but stopped more than 5min
ALL LED	Device has not been turn on	ALL LED TURN OFF
	Device ran out of battery

4. Configure APN

Obtain the correct APN name from your local SIM card provider. Ensure the tracker is in a good signal area for configuration.

SMS Command Format	Reply	Example	Note
apn,apn content,apnuser,apnpasswd#	apn ok	apn,orange,orange,orange#	If APN user and APN password exist, use this command.
apn,apn content#	apn ok	apn,internet#	If no APN user and APN password, use this command.

Note: APN information must be accurate. Incorrect APN may result in the tracker replying "SET APN ok" but failing to get online.

5. Package Content

MV66 OBD Tracker x 1
User Guide x 1
Packing Box x 1
OBD Extension Cable (optional) x 1

6. Functions Explanation

1. Voice Monitor

Step 1: Set up a center number for the device.

Command: CENTER,A,CENTER NUMBER#

Example: CENTER,A,+8613655559999#

Note: Include the country code as a prefix.

Step 2: Set up a number for the tracker to call back.

Command: MONITOR,number for monitor#

Example: MONITOR,+8613366668888#

The tracker will call the specified number, allowing the user to monitor the surrounding voice.

2. Set Data Upload Interval

Command: TIMER,T1,T2#

T1: Upload interval when ACC ON (0/5~18000 seconds, 0 means no upload, default is 10).
T2: Upload interval when ACC OFF (0/5~18000 seconds, 0 means no upload, default is 10).

Example: TIMER,10,3600# (Uploads every 10 seconds when the engine is on, and every 3600 seconds when off).

3. Vibration Alarm

Step 1: Set up a center number.

Command: CENTER,A,CENTER NUMBER#

Example: CENTER,A,+8613366668888#

Note: Include the country code as a prefix.

Step 2: Set up SOS contact numbers.

Command: SOS,A,SOS1,SOS2,SOS3#

Example: SOS,A,+8613366667777,+8613366667778,+8613366667779#

You can set up to 3 SOS alarm numbers.

Step 3: Set up the vibration alarm way.

Command: SENALM,A,M#

A = ON/OFF (default: OFF)
M = 0/1/2 (Alarming way: 0: Server only, 1: SMS+Server, 2: SMS+Server+Call, default: 2)

Example: SENALM,ON,1# (Vibration alarm messages sent via server and SMS).

7. Installation Recommendation

Where is the OBD interface?

Most car OBD interfaces are located in areas A and B. A smaller portion may be in C, D, and E.

An image shows the interior of a car with areas A, B, C, D, and E marked.

Area A: VW, Ford, Toyota, Hyundai, Citroen, BMW, etc./Most cars.
Area B: Honda, Lexus, etc.
Area C: Dongfeng Citroen, etc.
Area D/E: A few cars...

8. Troubleshooting

Type	Use
Unable to connect to tracking platform	Check APN and settings. Verify SIM card data service and balance.
Tracker shows offline	Check external power connection. Ensure the vehicle is not in a network blind area. Check SIM card balance.
Unable to locate	Ensure the top side faces upward without metallic shielding. Confirm there is no satellite coverage obstruction.
Location drift	In areas with poor GNSS signal (tall buildings, basements), drifting may occur. Check if vibration triggers the accelerator.
No command reply	Verify the command format is correct. The vehicle might be in a network blind area. Ensure the SIM card is properly inserted and has SMS service.

9. Full SMS Commands List

Query Commands

Functions	Command Format	Explanation
Version Inquiry	VERSION#	Device Reply Example: ID:7201074948 IMEI:354188046912460 ICCID:898602A51314F1298017 VERSION:MV66_V2.0.2 BUILD:OCT 19 2016 16:31:00
Map URL Inquiry	URL#	http://map.google.com/?q=22.557868,113.935090 <0.0km/h 0.0> <2023-01-06 17:32:13> IMEI:354188047752402
Check IMEI	IMEI#	DEVICE IMEI No. : 354188046912458
Address Inquiry	POSITION#	NOTE: Reply message's language is determined by device's language setting; if position content failed, device will reply Google Map location link.
Parameter Inquiry	PARAM#	ID: ID number of the tracker IMEI: IMEI number of the APN: APN name, APN user, APN password, IP: Domain name and port number or IP address, port number TIMER: Moving upload interval; Static upload interval SPEEDLIMIT: The overspeed threshold ANGLERPT: Data uploading angle CENTER: Center number of the tracker SOS: SOS1, SOS2, SOS3 GMT: Time zone
Status Inquiry	STATUS#	GPRS: CLOSED (No Network) FAILED (Connecting Network or Failure) SUCCESS (Connected to Network) GSM: NONE (No cellular Signal), HIGH / MED / LOW (Signal Strength), 18 (Signal value) GPS: CLOSED (GPS Module Closed); FIXED,N (Positioned and satellite number); UNFIX,0 (Not Positioned yet) SPEED: 30KM/H ACC: ON / OFF (ACC on or off) POWER: CONNECTED / DISCONNECTED (Power Connected or Disconnected), 12.5V (Vehicle battery voltage) SENSOR: ON/OFF (Sensor on or off), LEVEL: 3 (Sensitivity level 1-9) STATE: ARM (Arm or Disarm)
Alarms Parameters	ALARM#	ID: 19172012644 (ID number of device) STATE: ARM(DISARM) (Defense status of device) SPEED: ON/OFF (alarm status); 30km/h (alarm value); alarm way SHIFT: ON/OFF (alarm status); 300m (alarm value); alarm way VIBRATE: ON/OFF (alarm status); 3 (sensitivity level); alarm way ACC: ON/OFF (alarm status); 0/1/2 (0: ACC ON, 1: ACC OFF; 2: ACC ON&OFF) (alarm situation); alarm way ; POWER DOWN: ON/OFF (alarm status); alarm way LOW VOLTAGE: ON/OFF (alarm status); alarm way NOTE: Alarm Ways: Server Only, Server+SMS, Server+SMS+Call
Latitude&Longitude Inquiry	WHERE#	LAT:N23.02930,LON:E114.32180,COURSE: 0.00,SPEED:0.00KM/H,DATETIME: 2023-01-06 17:39:11

Setting Commands

Functions	Command Format	Explanation
Change IMEI	IMEICHG,354188046912460#	NEW IMEI No. : 354188046912460
Restore factory settings	FACTORY#	RESTORE FACTORY SETTINGS OK
Restart device	RESTART#	RESTARTING... 1 MINUTE WILL BE OK
APN Setting	APN,Network name [,name,password]#	APN,CMNET# (if no name & Password) APN,internet,internet,internet# (if with name & Password)
Server Setting	If set with Domain Name: SERVER,1,Domain,Port# If set with IP: SERVER,0,IP,Port#	SERVER,1,d.micodus.net,7700# SERVER,0,47.254.77.28,7700#
Internet Traffic Switch	TRAFFIC,ON# TRAFFIC,OFF#	OPEN TRAFFIC OK CLOSE TRAFFIC OK
Time Zone Setting	GMT,Time zone orientation,Whole Time Zone [Half Time Zone]#	GMT,E,8# (if no half time zone) GMT,W,9,30# (if has half time zone) NOTE: Parameter : E / W ; 0 ~ 12; 0/15/30/45
Set the angle upload	ANGLEREP,X,A,B# ANGLEREP,OFF#	Example: ANGLEREP,ON,30,3# (Means the tracker will send a data supplement when the angle change exceeds 30 degrees and lasts for 3 seconds) X=ON/OFF, default: ON; A=5~180 degrees, diversion angle degree, default: 30 degrees; B=2~5 seconds, detecting time, default: 3 seconds, CANCEL UPLOAD ANGLE OK
Mileage Statistics	MILEAGE,A,B# MIELEAGE#	Example: MILEAGE,ON,5000# (Means the initial mileage value is 5000KM) A=ON/OFF, On/Off mileage calculation, default: Off B=0~999999, Mileage initial value, unit: km; default: 0, mileage return to zero Query current mileage
Add SOS Administrator Number	SOS,A,1st number, 2nd number, 3rd number#	Set 3 numbers at a time: SOS,A,13800138000,13800138001,13800138002# Set the first number separately: SOS,A,13800138000# Set the second number separately: SOS,A,,13800138001# Means to set 3rd number separately: SOS,A,,,13800138002#
Delete SOS Administrator Number	SOS,D,1st number, 2nd number, 3rd number# or SOS,D,1,2,3#	Directly delete the number: SOS,D,13800138000# Delete 1st number: SOS,D,1# Delete 2nd number: SOS,D,2# Delete the 2nd and 3rd number: SOS,D,2,3#
Add Center Number	CENTER,A,center number#	CENTER,A,+8613800138000# NOTE: Please remember to add the country code as prefix with the cellphone number!
Delete Center Number	CENTER,D#	DEL CENTER OK
Data Upload Time Interval	TIMER,T1,T2#	Example: TIMER,5,3600# T1 ranges 0/5~18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 10; T2 ranges 0/5~18000 (seconds), upload interval when ACC OFF, default is 10;
Heartbeat Packet Upload	HBT,time#	Example: HBT,3# (Means the tracker will send hearbeat data package to server very 3min to keep the network connected ) Time: 1-60min, default 3min
Sensor Sensitivity	LEVEL,A#	Example: SENLEVEL,4# ( Means shake sensor level is set to 4) A=1-9 NOTE: 1-9 is from week to strong vibration
Arm manually	DISARM#	Set the device into arm mode
Disarm manually	ARM#	Set the device out of arm mode
Auto Arm By ACC	ACCARM,ON,M# ACCARM,OFF#	Example: ACCARM,ON,60# (Means the tracker will enter into arm status automatically when the ACC off more than 60 seconds) Arm Time: M=5-1800s, default: 60s Close auto arm function
Voice Monitor	MONITOR,+8613366669999# N: Number for Voice Monitoring	Example: MONITOR,+8613366669999# (Means the tracker will make call to this number +8613366669999, then this number +8613366669999 can pick up the call to monitor the voice) NOTE: 1.Please send this monitor command via the center number; 2. Any number can be set up to monitor the voice, the tracker will make a call to the number N and it will can pick up the call to monitor voice

Alarm Setting Commands

Functions	Command Format	Explanation
Overspeed Alarm Setting	SPEED,A,B,M#	Example: SPEED,ON,120,1# (Means the speed limit is 120km/h and the alarm way is via SMS and Server ) A=ON/OFF, open or close over speed alarm, default: OFF B=1~255(km/h), speed limit, default: 100(km/h); M=0/1/2, way of alarm, 0 : SERVER only, 1: SERVER+SMS, 2: SERVER+SMS+CALL; default: 1
Vibration Alarm Setting	SENALM,A,M# SENALM,OFF#	Example: SENALM,ON,2# (Means the vibration alarm already been enabled and the alarm message will be sent via Server, SMS and Call ) A=ON/OFF, default: OFF; M=0/1/2, way of alarming, 0 :GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default:1 CANCEL VIBRATE ALARM OK
Shift Alarm Setting	SHIFT,A,B,M# SHIFT,OFF#	Example: SHIFT,ON,100,1# (Means Setting 100 meters shift alarm range, when the ignition turned off, vehicle's 100 meters' shift will trigger the alarm.) A=ON/OFF; default:ON B=Shift Distance (Range: 100-9999m) M=0/1/2; way of alarm, 0 : GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+CALL, default:1 CANCEL SHIFT ALARM OK
ACC Status Change Alarm	ACCALM,A,B,M# ACCALM,OFF#	Example: ACCALM,ON,0,2# (Means the tracker will send alarm message out via Server, SMS and Call when the engine is start) A=ON/OFF, Default: ON; B: 0/1/2; 0: ACC ON Alarm; 1: ACC OFF Alarm; 2: ACC ON&OFF Alarm; Default:2 M: 0/1/2 (way of alarm): 0 : Server only, 1: SMS+Server, 2: SMS+Server+Call, Default:1; Cancel ACC alarm function
Power Disconnect Alarm	PWRALM,A,M# PWRALM,OFF#	Example: PWRALM,ON,2# (Means if the external power disconnect the tracker will send alarm message out via Server, SMS and Call ) A=ON/OFF, default ON; M=0/1/2, ways of alarming, 0: Serveronly, 1: SMS+Server, 2 : SMS+Server+Call, default:2; Close power disconnect alarm
Low Voltage Alarm Setting	LVALM,A,B,M# LVALM,OFF#	Example: LVALM,ON,13,2# (Means when the voltage of the car battery is lower than 13V, the tracker will send alarm message via Server, SMS and Call ) A=ON/OFF, default: ON; B=9-95V (Low Voltage Limit Value) M=0/1/2, way of alarming, 0: GPRS only, 1: SMS+GPRS, 2: SMS+GPRS+Call,default:1; CANCEL LOW VOLTAGE ALARM OK

10. Any Questions?

E-mail: support@micodus.com

Skype: MICODUS

11. Download the APP

Search "MiCODUS" in the iOS App Store or Google Play Store, or scan the QR code below to download the MiCODUS APP.

A QR code is displayed, along with buttons to download the app from the App Store and Google Play.

Models: MV66 2G Mini OBD II GNSS Tracker, MV66, 2G Mini OBD II GNSS Tracker, OBD II GNSS Tracker, GNSS Tracker, Tracker

File Info : application/pdf, 12 Pages, 8.89MB

f 66bcb10d3bbec

References

Spionlink - SIM Card Service | Prepaid Data Plan | GPS Tracker Supplier

Adobe PDF library 15.00 Adobe Illustrator 25.0 (Windows)

	MiCODUS MP90G User Manual: Setup, Features, and SMS Commands Comprehensive user manual for the MiCODUS MP90G GPS tracker. Learn how to set up, activate, and utilize its features like real-time tracking, SOS alerts, voice monitoring, and various alarm settings through detailed instructions and SMS commands.
	MiCODUS MV720 Tracker User Manual V2.0 User manual for the MiCODUS MV720 Tracker, providing setup instructions, specifications, troubleshooting, and SMS commands.
	MiCODUS MV790 GPS Tracker User Manual Comprehensive guide to setting up and using the MiCODUS MV790 GPS tracker. Learn about features, specifications, installation, SMS commands, and troubleshooting for vehicle tracking and security.
	MiCODUS ML935 Tracker User Manual Comprehensive user manual for the MiCODUS ML935 tracker, covering setup, specifications, features, troubleshooting, and SMS commands for device management.
	MiCODUS 4G MV710G GPS Tracker User Manual Comprehensive user manual for the MiCODUS 4G MV710G GPS tracker, covering features, specifications, installation, troubleshooting, and SMS commands.
	MiCODUS MV730 User Manual V2.0: Setup and Operation Guide Comprehensive user manual for the MiCODUS MV730 tracker, covering setup, specifications, functions, troubleshooting, and SMS commands for effective vehicle tracking and security.
	MiCODUS MV901 User Manual V1.0: Setup Guide Comprehensive user manual for the MiCODUS MV901 GPS tracker. Learn how to set up, install, and configure your device for optimal performance, including detailed specifications, wiring diagrams, and SMS command lists.
	MiCODUS MV55G User Manual V1.0: Setup and Operation Guide Comprehensive user manual for the MiCODUS MV55G tracker, covering features, specifications, activation, functions, installation, troubleshooting, and SMS commands.