Baby Trend MUV Expedition 2-in-1 Stroller Wagon Pro

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number invalidates all claims against the manufacturer. Any property damage during installation is the sole responsibility of the end user. Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, 8:00 am to 4:30 pm (PST). Return Authorizations are required prior to returning products. Warranty valid only in North America.

(Note: Warranty information is also provided in Spanish and French in the original document.)

Parts List

Check that you have all the parts for this model before assembling the stroller.

• Canopy with Mosquito Net (Dosel con Mosquitera / Auvent avec moustiquaire)
• Soft Parent Organizer (Organizador flexible para padres / Panier de rangement souple pour parents)
• Child Tray (Bandeja para niños / Plateau pour enfant)
• Front Wheels (Ruedas delantera / Roues avant)
• Rear Axle and (2) Wheels (Eje trasero y (2) Ruedas / Essieu arrière et (2) Roues)
• Wagon Frame (Marco de vagón / Auvent avec moustiquaire)
• Basket (Canasta / Panier)
• Seat 2 Mat (Asiento a colchoneta / Siège au tapis)
• Car seat adapter - fabric cover (Adaptador de la sillita para el automóvil - Cubierta de tela / Adaptateur pour siège-auto - Couverture de tissu)

(Note: Descriptions are provided in English, Spanish, and French in the original document.)

Safety Warnings and Precautions

• Always follow instructions for child safety.
• Failure to follow instructions could result in serious injury or death. Always use the safety harness and ensure children are properly positioned.
• Never leave children unattended.
• Exercise care when folding/unfolding to prevent finger entrapment.
• Stroller is designed for up to 2 children. Use with more than 2 children may cause instability and injury. Children must be at least 6 months old and able to sit upright unassisted.
• Accessories may change stroller balance, creating hazardous conditions.
• Ensure stroller is fully opened and locked in place before use.
• Weight limits: Child tray: 5 lbs (2.26 kg); Soft parent organizer: 2 lbs (0.90 kg); Basket: 15 lbs (6.80 kg); Per child: 55 lbs (24.94 kg); Total capacity: 110 lbs (49.89 kg). Exceeding limits can cause wear, stress, and instability.
• NEVER use on stairways or escalators.
• NEVER use with roller skates, in-line skates, skateboards, or bicycles.
• NEVER allow stroller to be used as a toy.
• Cleaning: Use mild household soap/detergent and warm water.
• Regularly check for loose screws, worn parts, torn material, or stitching. Replace or repair as needed.
• Discontinue use if malfunction or damage occurs.

(Note: Warnings are also provided in Spanish and French in the original document.)

Assembly Instructions

Read all instructions BEFORE assembly and USE. Keep for future reference.

Before assembly and each use, inspect the product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken. Adult assembly is required.

Frame Setup

To attach wheels, unfold stroller:

1. Release the fold latch. The fold latch mechanism is shown.
2. Unfold the stroller frame by pulling the handle upward until it clicks into locked position.
3. Check the RED indicator on the handle; it should not be visible when the stroller is fully open. If visible, ensure the open position lock is engaged.

Front Wheels

Insert front wheel axle pin into the wheel hub until the wheel locks firmly. Repeat on the other side. Pull the wheel assembly to ensure it is securely attached.

Rear Axle-Wheels

Attach the rear axle assembly and wheels:

1. Position stroller with rear leg tubes facing upward.
2. Place the rear axle with wheels over the rear legs and apply downward pressure on both sides to ensure they lock into place. The rear axle assembly with wheels is shown.

NOTE: NEVER use stroller if wheels do not lock into place. Contact customer service if assistance is needed.

Soft Parent Organizer

Strap the Soft Parent Organizer onto the stroller handle using the hook and loop fasteners. Ensure it is fastened tightly.

Child Tray

Attach the child tray by aligning the corresponding slots on the stroller frame. Slide down into position until locked. Ensure the tray is secure before use.

Canopy

Install canopy frame into designated slots on the child tray. The canopy frame is shown being inserted into the child tray slots.

To open: Use the strap and snap closure behind the main fold mechanism to anchor the canopy. Spread out both sides.

Install mosquito net: Unzip and pull out the net. Stretch it around the frame and hook corners to tabs. Repeat for all four tabs. The mosquito net is shown being attached to the frame tabs.

To store mosquito net: Lift the elastic end, roll towards the canopy, locate the zipper, and connect it to the track. Tuck into the pocket while zipping.

To remove canopy: Press tabs on each end and lift the canopy from the bottom slots of the child tray. The canopy is shown being lifted from the child tray slots.

To remove child tray: Push tabs outward and pull out the tray. The canopy can also be installed without the child tray.

Handle Storage

To use the handle: Locate it underneath the frame, press the release button, and pull the bar out. Rotate to the desired position. The handle mechanism is shown.

To put away: Reverse the process, push the handle in until it clicks. Ensure it rests on storage hooks. The handle being stored is illustrated.

Folding the Stroller

Close the canopy.

To use the double lock feature: Push safety lock up, lift trigger to hold it, then pull both triggers together. The double lock mechanism is illustrated.

Push down on the stroller handle until it is completely folded. Ensure the fold latch clicks to secure it. The stroller is shown being folded.

For a compact fold, ensure the handle is pushed completely to the front.

Unfolding the Stroller

Release the fold latch. The fold latch is illustrated.

Unfold the stroller frame by pulling the handle upward until it clicks into locked position. Check the RED indicator; it should not be visible when fully open. If visible, ensure the open position lock is engaged. The unfolding process is depicted.

Safety Harness

Always use the safety harness to prevent serious injury from falling or sliding out.

STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

The child tray is not designed to hold the child. Stay near and watch the child during use. NEVER leave child unattended.

Place the crotch strap between child's legs. Insert harness buckles into the center clasp. The harness buckle and clasp are illustrated.

Adjust waist straps for comfort and safety. Safety straps should fit snugly. IMPORTANT: Use the harness in the lowest position only. The highest position is for the folded Seat 2 Mat.

To release safety belt: Push button on center clasp; buckles will pop free. The release button on the clasp is shown.

Brakes

WARNING: Always set brakes when the stroller is not being pushed to prevent it from rolling away. NEVER leave unattended on a hill or incline.

To engage: Apply light downward pressure to the brake lever on each rear wheel. You may need to move the stroller slightly forward or backward to align the brake teeth with the wheel brake cluster. Check that the stroller does not move and both brakes are properly applied. The brake engagement mechanism is illustrated.

To release: Gently lift up on the brake lever.

Infant Seat Adapter

WARNING: For maximum weight, refer to the car seat manual. Ensure adapter is securely attached to the stroller frame before use. Tray and/or Canopy CANNOT be used with the adapter.

CAUTION: Avoid serious injury from falling; always use the safety belt to secure the car seat.

Installation:

1. Unfold the adapter and place it flat with straps down. Connect adapter bars. Ensure pins click into holes. Flip adapter with straps facing up. Ensure straps and D-rings are attached to the side bar at the foot-end. The adapter unfolding and connection is shown.
2. Open clips on adapter sides, open flaps on wagon cover to expose bar connection. Align clips to the bar and press into place. Close clips firmly. Check security. The process of attaching the adapter to the wagon is illustrated.

Removal:

Wrap thumbs over the wagon frame and use fingers to apply pressure on the clip to release it from the bar. The removal clip mechanism is shown.

Car Seat Installation:

1. Place car seat onto adapter, front facing the same direction as the adapter buckle. Ensure stoppers rest on the adapter bar. The car seat is shown being placed on the adapter.
2. Strap safety belts through the belt path on the car seat and connect buckles. Tighten straps for a snug fit. Tighten bottom support straps by pulling the loop and sliding the adjuster forward. The safety belt path and buckle connection are illustrated.
3. NOTE: Safety Belt MUST ALWAYS be installed through the Belt Path.

Removal of Car Seat: Release safety strap, reverse step 15, then follow step 14.

Wagon Fabric Maintenance

To detach fabric (for cleaning/replacement): Unzip from front and rear of wagon frame. The fabric detachment points are indicated.

Remove D-Rings straps from fabric near bottom frame to unthread harness straps. Remove screws on the underside of the frame. The removal of straps and screws is shown.

To reattach: Align fabric to frame. Insert D-Ring straps through slots and secure with D-Ring. Ensure zippers are zipped and hook/loop fasteners are attached. The reattachment process is illustrated.

NOTE: Regularly check for worn parts, torn material, or stitching. Replace or repair as needed.

Rear Axle Wheel Removal

To release rear wheel assembly: Push rear wheel release. Wheel detaches from bushing. The wheel release mechanism is shown.

To replace rear axle: Press pin on each side behind wheel hub. Pull axle out. The axle removal process is illustrated.

Accessories

Basket

To install: Attach basket from outside frame. Ensure latches are straight and facing frame. Insert by pushing and sliding latches down until locked. IMPORTANT: DO NOT put child in basket. The basket installation is shown.

To flip basket into wagon: Push from bottom upward and over until inside. Push down to ensure it's secure. The basket flipping action is illustrated.

To remove basket: Flip basket over frame. Pull latch levers forward and lift until basket comes off completely. The basket removal is depicted.

Side Mesh Panel

To open: Use hook and loop to align attachments on top. To close: Fold it back over. The side mesh panel operation is shown.

Seat 2 Mat

Option 1 Mat(s): Lay flat in stroller. IMPORTANT: Use harness in the lowest position only. Place mat with round edge towards back seating position. (See step 16 for rethreading).

Option 2 Seat(s): Thread crotch buckle through mat(s). IMPORTANT: Use lowest position for unfolded mat, highest for folded mat. Always buckle harness. Refer to step 10 for harness instructions.

Seat 2 Mat Washing Instructions

Remove foam and wash cover separately. Do not wash with other fabrics. Machine wash gentle/delicate cycle, cold water. Do not bleach. Do not tumble dry. Hang dry. Do not iron. Do not dry clean.

Care and Maintenance

• Cleaning Seat Pad: Spot clean only. Surface wash small spots with mild soap/water solution. Rinse. Wipe or air dry.
• Cleaning Stroller: Surface wash frame, plastic parts, and fabric with mild soap/water solution. Wipe surfaces. Wipe or air dry.
• Regularly check for loose screws, worn parts, torn material, or stitching. Replace or repair as needed.