O-KAM Pro User Manual

1-App Download and Registration

Follow these steps to download and register the O-KAM Pro app.

Screenshot Description: A mobile screen showing the 'Register account' page with fields for email address, user agreement, and a 'Get verification code' button. A QR code is also visible.

1. Search for "O-KAM Pro" in the App Store or Google Play, or scan the provided QR code to download the App.
2. Select "Register now", choose your corresponding region, and enter your email address to complete the registration.

2-Add Devices

Connect your O-KAM Pro device to your network.

Screenshot Description 1: The app's homepage showing a 'Hello, welcome to use' message and an option to 'Add a new' device.

Screenshot Description 2: A screen prompting the user to confirm the device is in a state of waiting for network configuration, indicated by a flashing light.

Screenshot Description 3: A screen to connect to Wi-Fi, listing available networks. The user needs to select their Wi-Fi and enter the password.

Screenshot Description 4: A 'Binding device' screen where the user confirms the camera name.

1. Open the App, log in to your account, and click the "[+] icon", then scan the QR code on the camera.
2. Enter the correct Wi-Fi password for your network.
3. Follow the on-screen prompts to confirm the Wi-Fi connection.
4. Bind the device to your account.

3-Device Sharing

Share access to your O-KAM Pro device with others.

Screenshot Description 1: The device's system settings menu, showing options like 'Power mode', 'Device Health', 'Service&AI', 'Device Settings', and 'TF Record Settings'. The 'Share' option is highlighted.

Screenshot Description 2: A QR code sharing screen, displaying a QR code that can be scanned by another user to gain access.

1. In the app, click "System settings" and then select "Share".
2. A QR code will be generated for sharing.
3. Instruct the other user to scan this QR code with their mobile phone camera from a distance of approximately 15-30cm.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.