Wi-Fi Camera Manual

1. Packing list

Please unpack the camera carefully and check whether the following accessories are included in the box:

• Camera*1
• Screw lamp plug *1
• Screw lamp holder *1
• Screw package *1
• User's Guide *1

2. Structure diagram

The Wi-Fi camera has the following components:

• Screw holder
• Bulb curtain
• Floodlight
• Microphone
• Lens
• White light
• Infrared lamp
• Reset button
• SD card slot
• Speaker

3. Download APP

Download the O-KAM Pro app from the App Store or Google Play. You can also download the app by scanning the QR code provided using your smartphone's QR code scanner.

The app interface includes login and homepage sections, with options to add a new device.

4. Add camera

4.1 Connecting method 1: WiFi connection

1. Plug in the power supply to power on the camera. Wait for the self-check to complete. The camera will broadcast, "Please use the APP for WiFi configuration". If not, press and hold the reset button for 3-5 seconds to reset.

2. Enter the Wi-Fi network name and password. Ensure the camera is near the router for a stable connection. The camera supports 2.4GHz Wi-Fi networks. Verify the account password is correct before clicking "Next". The camera will provide a voice prompt during connection.

3. After successful addition, you can edit the camera name to distinguish it in different locations and click "Get started". Click the "Play" icon to view the live feed.

4.2 Connecting Method 2: Two-dimensional code distribution network

1. Plug in the power supply to power on the camera. Wait for the self-check to complete. The camera will broadcast, "Please use APP for WiFi configuration". If not, press and hold the reset button for 3-5 seconds to reset. Click the "+Add" button to scan the QR code on the camera.

2. Enter the Wi-Fi network name and password. Ensure the camera is near the router. The camera supports 2.4GHz networks. Click "Next" to generate a QR code for pairing.

3. Aim the camera lens at the QR code from a distance of 15-30cm. The camera will make a sound to indicate successful scanning and pairing initiation. Click "Bind Now" and then "Play" to view the picture.

5. PTZ and lighting control

The camera supports Pan-Tilt-Zoom (PTZ) and lighting control. Use the app interface to control rotation and live screen zoom. Turn on the function switch and find the "Floodlight" button for light control.

6. Share the camera

Share your camera by finding it on the app homepage or settings page. Click "Share" to generate a QR code for other users to scan with the 'O-KAM Pro' app. You can set permissions for shared users, allowing them to watch videos or control functions.

7. Product specifications

8. Installation guide

1) Choose a suitable location for installation. Please install the camera in a place with an unobstructed field of vision and ensure a good Wi-Fi signal at the location.

9. Common problems and solution

Q1. Unable to add camera for the first time.

A: Ensure the camera is powered on and has completed self-check. The camera will broadcast "Please use the App for Wi-Fi configuration" upon completion.

1. Make sure the Wi-Fi account and password are correct.
2. Ensure a smooth network connection when adding the camera, preferably near the router.
3. If connection fails with the QR code, try the AP distribution network. After connecting to the camera's Wi-Fi hotspot via phone, return to the app to add the device. Avoid complex passwords with special characters like '\'.
4. If both methods fail, restart the router and try again.

Q2. Can't recognize TF card?

A: After inserting the TF card, check "System Settings"-"TF Card Video Settings" in the app. If "TF card not detected" appears, identification has failed.

1. Please use a branded TF card.
2. Ensure the TF card is recognized normally by a computer.
3. Only FAT32 format is supported.
4. The suggested TF card capacity is between 2-128G.

Q3. How to deal with equipment failure?

A: Restart the camera's power supply. If the issue persists, press and hold the reset button for 3-5 seconds to reset, delete the original camera from the app, and add it again.