CYCPLUS C3 Speed/Cadence Sensor User Guide

This guide provides instructions for the CYCPLUS C3 Speed/Cadence Sensor.

Quick Start

Follow these steps to get your CYCPLUS C3 sensor ready:

Push the battery cover's protrusion to the center position and then open the battery cover.
Remove the battery isolation sheet and then reinstall the battery cover.
Install the battery cover onto the body. When installing, align the protrusion to the center position.
Press the battery cover tightly, and then push the battery cover's protrusion to the left or right to set the sensor to speed or cadence mode.
After installation, the indicator light will flash for 10 seconds.

Fit to Bicycle

Attach the sensor to your bicycle:

Speed Measurement

Attach the curved rubber pad to the bottom of the sensor. Fix the sensor onto the hub using a rubber band. Turn the wheel to activate the sensor and establish a connection with your device or app.

Cadence Measurement

Attach the flat rubber pad to the bottom of the sensor. Fix the sensor onto the crank using a rubber band. Turn the crank to activate the sensor and establish a connection with your device or app.

Instructions for Use

Before using, open the battery cover and remove the transparent insulation spacer.
One sensor cannot measure both speed and cadence simultaneously. For simultaneous measurement, purchase two sensors.
For speed measurement, the hub width must be more than 38mm.
The product defaults to cadence measurement. The Bluetooth name is CYCPLUS C3 when used for cadence measurement, and CYCPLUS S3 when used for speed measurement.
When using Bluetooth protocol, it can only connect to one device or app at a time. Disconnect the previous connection before changing devices or apps.
When using ANT+ protocol, it can connect to multiple devices simultaneously.
When using a smartphone app, search for the sensor within the app. Searching via the phone's system Bluetooth function is invalid.

Specifications

Dimension: 9.5mm × 29.5mm × 38.0mm
Weight: 9.2g
Battery: 220mAh CR2032
Usage time: 600 hours (Cadence) / 400 hours (Speed)
Standby time: 300 days
Protection rating: IP67
Compatible with: Garmin, Wahoo, Zwift, Tacx, Bryton, XOSS, Blackbird, and other devices.
Protocol standards: The sensor can connect to any APPs or devices that support Bluetooth or ANT+.

Summary: Switch Work Modes

To switch between speed and cadence modes, rotate the battery cover. When switching modes, hold the cover with your hand to prevent it from dislodging when passing through the gap.

Speed Mode: Speed measurement

Cadence Mode: Cadence measurement

Indicator Light

Blue light flash: Speed measurement
Green light flash: Cadence measurement
Red light flash: Battery power is less than 20%

Factory Information

Manufacturer: Chengdu Chendian Intelligent Technology Co., Ltd

Warranty: One-year free replacement or repair

After-sale Email: steven@cycplus.com

Certificate of Conformity

Model Name: C3

Product Name: Speed/Cadence Sensor C3

Implementation Standard: Q/CDZN 002-2023

Inspector: 检验合格 (Inspection Qualified)

The product has been tested and proved to be qualified for delivery.

Made in: China

Recycling Information

This device, its accessories, and batteries are recyclable. Please dispose of them at designated collection points (store or recycling center). Find collection points at www.quefairedemesdechets.fr. Prioritize repair or donation of your device.

	Cycplus C3 Speed/Cadence Sensor User Guide User guide for the Cycplus C3 speed and cadence sensor, detailing installation, mode switching, indicator lights, specifications, and compatibility with cycling devices and apps.
	CYCPLUS C3 Hastigheds- og Kadencesensor Brugermanual En komplet brugermanual for CYCPLUS C3 hastigheds- og kadencesensor, der detaljerer installation, konfiguration og brug til cykling.
	CYCPLUS Speed Cadence Sensor User Guide User guide for the CYCPLUS Speed Cadence Sensor, detailing its specifications, packing list, and instructions for use in both speed and cadence measurement modes. Includes FCC compliance information.
	Cycplus C3 Speed and Cadence Sensor User Guide User guide for the Cycplus C3 Speed and Cadence Sensor, detailing installation, usage, and specifications for cyclists.
	CYCPLUS M3 GPS Bike Computer User Manual Comprehensive user manual for the CYCPLUS M3 GPS Bike Computer, covering quick start guide, button functions, data display, settings, app connection, installation, specifications, and manufacturer information. Includes a tire circumference chart and FCC warning.
	Cycplus M2 GPS Cycling Computer User Manual Comprehensive user manual for the Cycplus M2 GPS cycling computer, covering setup, operation, settings, connectivity with apps like XOSS and Strava, and safety information.
	Cycplus M1 GPS Bike Computer User Manual and Setup Guide Explore the Cycplus M1 GPS Bike Computer user manual. Learn about its features, installation, quick start, button functions, settings, app connectivity with XOSS, Strava, and TrainingPeaks, and detailed specifications for optimal cycling performance.
	CYCPLUS M2 GPS Bike Computer User Manual Comprehensive user manual for the CYCPLUS M2 GPS Bike Computer, covering setup, operation, settings, sensor connection, and troubleshooting. Learn how to maximize your cycling experience with this device.