Manuals+

Fortin EVO-ONE THAR-GM6 Installation and Programming Guide

This document provides installation and programming instructions for the Fortin EVO-ONE and THAR-GM6 bypass module, designed for Chevrolet Equinox vehicles equipped with a Push-to-Start system.

Product Overview

The Fortin EVO-ONE is an all-in-one remote starter, alarm, immobilizer bypass, and data interface module. The THAR-GM6 is a specific harness for compatible vehicles.

Vehicle Compatibility:

  • Make: Chevrolet
  • Model: Equinox
  • Year Range: 2018-2024
  • System: Push-to-Start

Firmware:

The minimum required bypass firmware version is 70.[45]. To update firmware or options, use the Fortin FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).

Installation Requirements and Warnings

Mandatory Installation Components:

  • The hood pin switch (included) must be installed. If the vehicle can be remote started with the hood open, function A11 must be set to OFF.
  • A security sticker (included) must be installed.

Important Warnings:

  • This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.
  • The information provided is a guide and may change without notice. Always refer to the latest version available at www.fortin.ca.
  • Fortin Electronic Systems assumes no liability for installation errors or inaccuracies in the provided information.

Module Manufacturing Dates:

This guide may apply to modules manufactured between April 2018 and April 2019.

Wiring Configuration

This section details the wiring connections required for automatic transmission vehicles. It involves connecting the THAR-GM6 harness to the vehicle's BCM (Body Control Module) and other relevant points.

Key Connections:

  • The main harness connects to the vehicle's BCM, typically located on the right side of the center console.
  • Specific T-harness connectors (e.g., 27-pin Blue, 26-pin White, 25-pin Green/Pink) are used to interface with the vehicle's factory wiring.
  • The diagram illustrates connections for ignition, parking lights, and other vehicle functions.
  • Ensure proper insulation of connectors to prevent short circuits.

Note: The specific wire colors and pin assignments are detailed in the original document's diagrams, which are complex to replicate textually. Refer to the visual diagrams in the PDF for precise connections.

Programming Procedures

The following sections detail the procedures for programming the key bypass and remote starter functions.

Key Bypass Programming Procedure (1/2)

  1. Remove the battery from the OEM remote.
  2. Place the OEM remote in the front cup holder in the vehicle's center console.
  3. Insert the 6-Pin Main connector. The LEDs will alternate between BLUE, RED, YELLOW, and BLUE/RED flashes.
  4. Release the programming button when the YELLOW LED is solid. If the LED is not solid YELLOW, disconnect and restart from step 1.
  5. Insert the remaining required connectors.
  6. Press and release the programming button five times. The YELLOW LED will flash five times per second.
  7. Wait for the YELLOW LED to turn solid ON.
  8. Open the driver's door.
  9. Press the foot-brake pedal.
  10. Press the Push-to-Start button until the engine starts.
  11. Release the foot-brake pedal. The RED LED will turn ON, and the YELLOW LED will turn OFF.

Key Bypass Programming Procedure (2/2)

  1. Press the Push-to-Start button until the engine turns OFF.
  2. Close and open the driver's door.
  3. Press the foot-brake pedal.
  4. Press the Push-to-Start button until the engine starts.
  5. Release the foot-brake pedal. Observe LED status:
    • The BLUE LED will turn ON.
    • The BLUE LED will turn OFF.
    • The RED LED will turn OFF.
    • The YELLOW LED will flash rapidly.
    • The BLUE LED will turn ON.
    • The BLUE LED will flash rapidly.
  6. Press the Push-to-Start button until the engine turns OFF. The BLUE LED will flash slowly.

Key Bypass Programming Procedure (3/3)

  1. After DCryptor programming is completed, reconnect the 6-Pin (Main-Harness) or 4-pin (Data-Link) connector, followed by all other remaining connectors.
  2. Remote Starter / Alarm Verification Procedure: Test the remote starter by starting the vehicle remotely. The module is now programmed.

Remote Starter Functionality

To use the remote starter:

  • Ensure all doors are closed.
  • Press the Unlock button on the OEM remote three times (3x Lock to remote start).
  • To enter the vehicle after remote start, have the Intelligent Access Key with you.
  • The vehicle is now ready to be put into gear and driven.

Important Note: If the vehicle is not unlocked, the module will shut down the remote starter and the vehicle as soon as any door is opened.

Firmware and Guide Updates

Updated firmware and installation guides are regularly posted on the Fortin website (www.fortinbypass.com). It is recommended to update the module to the latest firmware and download the latest installation guide(s) before installation.

Models: THAR-GM6, 84211, 70. 45, EVO-ONE Remote Starter Alarm Bypass, EVO-ONE, Remote Starter Alarm Bypass, Starter Alarm Bypass, Alarm Bypass, Bypass

File Info : application/pdf, 8 Pages, 2.85MB

PDF preview unavailable. Download the PDF instead.

EVO-ONE IG THR BI GM6 EQUINOX PTS 2018 B 84211

References

Adobe PDF Library 17.0 Adobe InDesign 19.0 (Windows)

Related Documents

Preview Fortin EVO-ONE THAR-GM6 Installation Guide for Chevrolet Cruze
Installation and wiring guide for the Fortin EVO-ONE remote starter and bypass module (THAR-GM6) for 2012-2015 Chevrolet Cruze Push-to-Start vehicles. Covers setup, options, and vehicle integration.
Preview Fortin EVO-ONE THAR-GM6 Installation Harness for Chevrolet Trailblazer (2021-2023)
Comprehensive installation and programming guide for the Fortin EVO-ONE remote starter, alarm, and bypass module with the THAR-GM6 harness, designed for Chevrolet Trailblazer (2021-2023) Push-To-Start models. Includes wiring details, programming steps, and functionality.
Preview Fortin EVO-ONE Remote Starter and Bypass Module Installation Guide for Chrysler 200 (2015-2017)
Comprehensive installation and programming guide for the Fortin EVO-ONE remote starter and bypass module, specifically for Chrysler 200 models (2015-2017) with push-to-start systems. Includes wiring diagrams, programming procedures, and notices.
Preview Fortin EVO-ALL Installation and Programming Guide for Chrysler & Dodge Vehicles
This guide provides detailed installation, wiring, and programming instructions for the Fortin EVO-ALL remote starter and data bypass module. It covers compatibility for Chrysler 300, 300C, Dodge Challenger, and Charger models from 2019-2021 with push-to-start systems and automatic transmissions.
Preview Fortin EVO-ONE THAR-ONE-TOY16 Installation Guide for Toyota Sienna Hybrid (2021-2024)
Comprehensive installation and programming guide for the Fortin EVO-ONE remote starter and bypass module, featuring the THAR-ONE-TOY16 harness, specifically for the Toyota Sienna Hybrid model years 2021-2024. Includes wiring diagrams, programming procedures, and operational instructions.
Preview Fortin EVO-ONE THAR-ONE-TOY16 Installation Guide for Lexus RX350h
Installation and programming guide for the Fortin EVO-ONE remote starter and bypass module (THAR-ONE-TOY16) for Lexus RX350h 2023-2024 models. Features wiring diagrams, unit options, and setup procedures.
Preview Fortin EVO-ALL Installation Guide for Mitsubishi Outlander and Nissan Rogue
Comprehensive installation guide for the Fortin EVO-ALL remote starter and bypass module, covering standalone and THAR-NIS7 harness installations for select Mitsubishi Outlander and Nissan Rogue models with automatic transmissions. Includes wiring diagrams, programming procedures, and functionality details.
Preview Fortin EVO-ONE Installation and Programming Guide for RAM ProMaster (THAR-CHR7/THAR-CHR6)
This guide provides detailed instructions for installing and programming the Fortin EVO-ONE remote starter and bypass module for RAM ProMaster vehicles (2022-2023). It covers wiring connections, DCRYPTOR programming, key bypass procedures, and remote starter functionality.