Zeblaze Stratos 3 Pro User Manual

How to Connect?

Download and install the "Zeblaze Fit" APP to better manage your watch, log in to your account, and enjoy more services. Note: The APP version may have been updated, please follow the prompts according to the current APP version.

1. Long press the function key to turn on the watch.
2. Scan the QR code displayed on the watch with your mobile phone, download and install the "Zeblaze Fit" APP. You can also download and install the APP from the APP store, or scan the QR code provided.
3. Open the "Zeblaze Fit" APP and log in to your account.
4. Select "Add device" and follow the instructions to add your watch.

Note: When pairing, please make sure that the phone's Bluetooth is turned on and the watch is well connected to the phone. If you cannot find the watch when adding the APP, or cannot connect to the phone during use, please press and hold the power button of the watch for 5 seconds to restore the factory settings, and then try again.

How to Wear It?

In daily use, tie the watch comfortably to your wrist, about one finger width away from the wrist bone. Adjust the wristband to ensure that the heart rate sensor can collect data normally. Note: Wearing the watch too loosely may affect the data collection of the heart rate sensor.

Basic Operations

1. Open the control panel: Swipe down from the top of the home screen.
2. View notifications: Swipe up from the bottom of the main screen.
3. Switch widgets: Swipe left or right on the home screen page.
4. Back: Swipe from the left edge to the right when you are on other screen pages.

Charging

When the battery is low, charge the watch immediately.

Adjust & Install/Uninstall the Strap

Adjust the position of the buckle according to the circumference of the wrist. Align the slot of the strap with the watch, and then insert the strap into the watch until you hear a click. You can pull the strap to see if it is firmly installed.

To install or remove the strap:

• Release the strap by pressing the quick-release pin (if applicable) or by sliding the spring bar.
• Align the new strap with the watch lugs and insert the spring bar into the corresponding hole.
• Ensure the strap is securely attached before use.

Global Positioning System (GPS & A-GPS)

The watch supports Global Positioning System (GPS) tracking. When you are doing outdoor sports such as running, GPS will automatically start to work and notify you when the positioning is successful, and exit tracking once you stop exercising.

• An open field outdoors is the best place for GPS tracking.
• In crowded situations, raising your arm can better help GPS positioning.
• It is recommended to start exercising only when GPS starts to work.

The watch has an assisted GPS (A-GPS) function, which can accelerate GPS positioning through data directly from GPS satellites. Make sure that your watch is connected to your phone via Bluetooth; the data can be automatically synchronized to your watch from the "Zeblaze Fit" APP, and the A-GPS data will also be automatically updated.

If the data is not synchronized for 7 consecutive days, the A-GPS data will expire. If so, you need to re-acquire positioning information. You can update the positioning information on the outdoor sports page of the watch.