VICKLEBY Floor Lamp
Assembly, Connection, Operation, Transportation, Storage, and Disposal Guide
General Information
This document provides a guide for the VICKLEBY household floor lamp, covering its assembly, connection, operation, transportation, storage, and disposal.
Important: Read this manual carefully before using the unit and keep it until the end of the product's operation.
The product is designed for general use in indoor spaces and is certified.
Hazard Information: The product does not contain hazardous or harmful substances that may be released during its lifecycle when operated according to the rules.
WARNING: ALTERNATING CURRENT VOLTAGE OF 220V IS POTENTIALLY LETHAL! ⚡
Technical Specifications
| Source voltage (alternating current) | 110-240 V |
| Network power frequency | 50-60 Hz |
| Maximal total capacity of the lamp | 8.5 W |
| Lamp voltage | 220-240 V (Sold without light source) |
| Bulb socket type | GU10 |
| Maximum capacity of the bulb | 8.5 W (Sold without light source) |
| Number of bulbs | 1 |
| Operating temperature | +5 to +40 °C |
| Relative humidity (not exceeding) | 80% |
| Product's protection rating | IP20 |
| Material | Paper, metal, plastic |
| Service Life | 10 years |
The product can be used after its service life if safety information and instructions are followed. For disposal, contact your local recycling facility.
Safety Measures
Important! All assembly and installation work should be performed only with a disconnected power supply! ?
- Do not use the lamp in humid environments like bathrooms.
- Using bulbs with higher capacity or different structure than indicated may cause malfunction and void the warranty.
- Clean the lamp with a soft, dry cloth.
- Do not use chemically active or aggressive cleaning agents.
How to Use
- Inspect the product for damage to the plug, power cord, and lamp.
- Insert the bulb into the lamp.
- Plug the unit into the socket.
Maintenance
To replace the bulb:
- Disconnect the lamp from the power supply.
- Allow the bulb and lamp case to cool down completely.
- Ensure the replacement bulb matches the lamp's type and capacity requirements.
- Remove the old bulb and install the new one.
Transportation and Storage
Transport and store the product in its packaging with safety precautions to prevent mechanical damage and exposure to atmospheric precipitation.
Disposal
Dispose of the product in compliance with local legal requirements. The crossed-out wheeled bin symbol ?️ indicates that the item should be disposed of separately from household waste and handed in for recycling. Proper disposal helps reduce waste and minimize environmental impact. For more information, contact your local IKEA store.
Probable Malfunctions and Methods for Remedy
Important! All malfunction remedy work should be performed only with a disconnected power supply!
| Symptom | Troubleshooting Steps |
|---|---|
| The lamp doesn't work | Check the supply-line voltage. |
| Ensure the bulb has suitable voltage and capacity. | |
| Check the bulb's performing capacity. | |
| Check the bulb's position. |
If these steps do not resolve the issue, contact qualified specialists.
Product Data
| Product name | VICKLEBY |
| Product type | Household Floor lamp |
| Product model or Art.nr | Typ G2013 Vickleby |
| Trademark | IKEA |
| Country of origin | China |
| Manufacturer | IKEA of Sweden AB |
| Address | Box 702, ÄLMHULT, S-343 81, Sweden |
| Regarding the quality of IKEA products contact seller | LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1 - through the form on website www.IKEA.ru, by phone 8 (800) 234-55-66 or to the IKEA Service department in any IKEA store. |
| Importer | LLC “IKEA TORG”, bld. 1, microraion IKEA, Khimki, Moscow region, 141400 Russia, tel.: +7(495) 737-5301, fax: +7(495) 737-5324 |
| Manufacture date | Date of manufacture specified in the format DD.MM.YY on the label or package |
EAC
For questions about the quality of IKEA goods, please contact the seller: LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1 - through the form on website www.IKEA.ru, by phone 8 (800) 234-55-66 or to the IKEA Service department in any IKEA store.
Assembly Instructions
Step 1: Attach the four legs (4x) to the base of the lamp. Ensure they click into place. [click sound indicator]
Step 2: Place the main lamp body onto the base. Secure the power cord connection.
Step 3: Insert the central pole into the lamp body and twist to secure. [rotation indicator]
Step 4: Assemble the remaining pole sections by connecting them end-to-end. [connection indicator]
Step 5: Carefully place the lamp shade over the assembled pole structure.
Step 6: Secure the lamp shade to the top of the pole using the provided fastener. [fastener indicator]
Important Safety Note
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer, his service agent, or a similar qualified person to avoid a hazard. If you are uncertain, please contact IKEA. ⚠️
ИКЕА - IKEA
