IKEA LERSTA Floor Reading Lamp
Design and Quality IKEA of Sweden
Introduction and Safety
This document provides guidance for the household floor lamp LERSTA, covering assembly, connection, operation, transportation, storage, and disposal. Please read this manual carefully before using the unit and keep it until the end of the product's operation.
⚠️ WARNING: ALTERNATING CURRENT VOLTAGE OF 220V IS POTENTIALLY LETHAL!
The product contains no hazardous or harmful substances that may release during its life cycle according to operating rules.
General Information
The product is designed for general use in indoor spaces and is certified.
Technical Specifications
| Specification | Value |
|---|---|
| Source voltage (alternating current) | 110-240V |
| Network power frequency | 50-60Hz |
| Maximal total capacity of the lamp | 20W |
| Lamp voltage (Sold without light source) | 220-240V |
| Bulb socket type | E27 |
| Maximum capacity of the bulb (Sold without light source) | 20W |
| Number of bulbs | 1 |
| Operating temperature | +5 to +40 °C |
| Relative humidity (not exceeding) | 80% |
| Product's protection rating | IP20 |
| Material | Aluminium |
| Service Life | 10 years |
Operation
Safety Measures
- All assembly and installation work should be performed only with a disconnected power supply!
- It is prohibited to use the lamp in very humid environments (e.g., bathrooms).
- Using bulbs with higher capacity or a different structure than indicated may cause malfunction and void warranty service.
- Clean the lamp with a soft dry cloth.
- Do not use chemically active or aggressive cleaning agents.
How to Use
Inspect the product for integrity of the plug, power cord, and lamp. Insert the bulb into the lamp. Insert the plug into the socket.
Maintenance
To Replace the Bulb:
- Disconnect the lamp from the power supply network.
- Allow the bulb and lamp case to cool down completely.
- Ensure the replacement bulb matches the lamp's type and capacity requirements.
- Remove the old bulb and install the new bulb.
Transportation and Storage
The product should be transported and stored in its packaging, following safety precautions to avoid mechanical damage and exposure to atmospheric precipitation.
Disposal
The product must be disposed of in compliance with local legal requirements. The crossed-out wheeled bin symbol ?️ indicates that this item should be disposed of separately from household waste. Hand it in for recycling according to local environmental regulations. Proper disposal helps reduce waste volume and minimizes negative environmental impact. For more information, please contact your IKEA store.
Probable Malfunctions and Methods for Remedy
⚠️ Important! All works targeted at the remedy of possible malfunction should be performed only with a disconnected power supply!
The lamp doesn't work
- Check the supply-line voltage.
- Make sure the bulb has suitable voltage and capacity.
- Check the bulb's performing capacity.
- Check the bulb's position.
If these methods do not resolve the issue, contact qualified specialists.
Product Data
| Product Name | LERSTA |
|---|---|
| Product Type | Household floor read lamp |
| Product Model or Art.nr | TYP G0523-1 LERSTA |
| Trademark | IKEA |
| Country of Origin | China |
| Manufacturer | IKEA of Sweden AB, Box 702, ÄLMHULT, S-343 81, Sweden |
| Regarding Quality / Contact Seller | LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1. Contact via website www.IKEA.ru, phone 8 (800) 234-55-66, or IKEA Service department in any IKEA store. |
| Importer | LLC "IKEA TORG", bld. 1, microraion IKEA, Khimki, Moscow region, 141400 Russia, tel.: +7(495) 737-5301, fax: +7(495) 737-5324. |
| Manufacture Date | Specified in the format DD.MM.YY on the label or package. |
For questions about the quality of IKEA goods, please contact the seller: LLC IKEA DOM, Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1 - through the form on website www.IKEA.ru, by phone 8 (800) 234-55-66 or to the IKEA Service department in any IKEA store.
Assembly Instructions
Follow these steps to assemble the LERSTA floor lamp:
- Step 1: Attach the main pole to the circular base. Insert the pole into the base and secure it.
- Step 2: Connect the upper pole section, which includes the flexible arm, to the lower pole section. Ensure the switch is correctly oriented.
- Step 3: Screw the lamp holder onto the end of the flexible arm.
- Step 4: Unscrew the retaining ring from the lamp holder to prepare for attaching the lampshade.
- Step 5: Place the lampshade over the lamp holder, aligning the holes, and secure it by screwing the retaining ring back onto the lamp holder.
- Step 6: Adjust the angle of the lampshade and flexible arm to your desired position.
