SOMMARLÅNKE

General Information

For INDOOR & OUTDOOR USE!

Important Safety Instructions

⚠️ IMPORTANT SAFETY INSTRUCTIONS

Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.

CAUTION!

The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.

WARNING

Deviation from the assembly instructions may result in a risk of fire or electric shock.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This decorative item is not intended for use by people (including children) whose physical, sensory, or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised. Children must be supervised to ensure that items are not used as toys.

CAUTION and mind the following. To reduce the risk of fire and electric shock:

• Disconnect the decorative item from the power source before performing any maintenance or cleaning activity.
• Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.
• Disconnect the item when leaving the house, going to bed, or if left unattended.
• Do not cover the decorative item with fabric, paper, or any material that is not part of the product when it is being used.

SAVE THESE INSTRUCTIONS

Assembly and Operation

Diagram: A person speaking, with a speech bubble containing a wrench symbol (?). This suggests the need for tools or assembly.

Diagram: A person looking confused at lamp parts, then a person on the phone with an IKEA building in the background. This implies assembly assistance or contacting IKEA for help.

Parts List

Diagram: Exploded view of lamp components with quantities:

• Base (1x)
• Pole (1x)
• Lamp head assembly (dome, socket/arm) (1x)
• Fasteners (screws/nuts) (1x each)

Assembly Steps

Step 1: Connect the pole to the base.

Diagram: Shows the pole being inserted into the base. An information icon (ⓘ) is present with a diagram showing the lamp head assembly being attached incorrectly (crossed out ❌).

Step 2: Attach the lamp head assembly to the pole.

Diagram: Shows screws being used to attach the lamp head to the pole. Also shows correct (✔️) and incorrect (❌) ways to attach the lamp head to the arm.

Step 3: Adjust the lamp head position.

Diagram: Close-ups showing how to adjust the lamp head position up/down (⬆️⬇️) and how to rotate it.

Battery Information

Diagram: Shows the battery compartment. Batteries (NiMH 1.2V AA, 2450mAh) are inserted. A symbol indicates proper battery disposal (crossed-out battery ? with a trash can ?️).

Only replace batteries with IKEA LADDA type HR6 AA 1.2V 2450 mAh.

Disposal of used batteries should be in compliance with any local regulations.

Power Supply

Diagram: Shows connection options for power. The lamp can be powered via USB (e.g., laptop) or a wall adapter, both rated 5V DC Min 1A, Class 2.

For use with Class 2 IKEA listed power supply with output 5Vdc, min 1A.

Operation

The lamp brightness can be adjusted by repeatedly pressing the control button.

Diagram: Illustrates three states of operation, indicated by 1x, 2x, 3x:

• 1x press: Lamp turns on to a certain brightness.
• 2x press: Lamp brightness increases.
• 3x press: Lamp brightness further increases or changes (e.g., turns off or changes color temperature, implied by light bulb icon changes). The control button is shown with up/down arrows (⬆️⬇️).

Save Instructions

CONSERVEZ CES INSTRUCTIONS / GUARDA ESTAS INSTRUCCIONES / SAVE THESE INSTRUCTIONS