Tapo Smart Water Leak Sensor

Quick Start Guide

Appearance

Images may differ from actual products.

1 Control Button:

Single press: Silence alarm; Test connection with the hub.
Double press: Adjust alarm volume. The volume level cycles through High, Normal, Low, and Mute.
Press and hold for 5s: Pair with hub.

2 LED Indicator:

Blinking once: Enter pairing mode
Blinking twice: Adjusted alarm volume level to Mute
Blinking 3 times: Adjusted alarm volume level to Low
Blinking 4 times: Adjusted alarm volume level to Normal
Solid: Adjusted alarm volume level to High

3 Sensor Probe

4 Buzzer

5 Battery Compartment

Getting Started

[Sensor with battery tab]

1. Power Up Your Sensor

Remove the battery insulation tab to power up your sensor. The LED should blink.

[Sensor being tested with water drip]

2. Check Your Sensor

The sensor will alarm if you drip water on the sensor probe or place it on a wet surface.

[Smartphone displaying Tapo App with QR codes]

3. Set Up Your Sensor on the Tapo App

A Tapo Hub is required. Make sure your Tapo Hub's firmware is updated to the latest version and successfully set up via the Tapo app.

Open the Tapo app and tap the + button. Select Sensors and then your model. Follow the app instructions to complete setup.

[Person pressing sensor button, hub alarm sound icon]

4. Test Your Sensor

After setup, single press the control button on your sensor and check if the hub sounds an alarm.

[Sensor placed flat on a surface]

5. Place Your Sensor

Lay the sensor flat to monitor water leaks.

How to Replace Battery

[Diagram showing screws being removed and back cover detached]

a. Remove the two screws securing the batteries and remove the back cover.

[Diagram showing new batteries being inserted]

b. Replace with the new batteries (AAA/LR03).

Warning: Risk of explosion if the battery is replaced by an incorrect type.

Warning: Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Safety Information

Operating Temperature: 0°C (32°F) - 40°C (105°F)

Do not ingest battery, Chemical Burn Hazard.

Keep the device away from fire or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link support.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Need some help?

Visit www.tapo.com/support/ for technical support, user guides, FAQs, warranty & more.

	Tapo T300 Smart Water Leak Sensor Datasheet \| TP-Link Explore the TP-Link Tapo T300 Smart Water Leak Sensor. Features include 90 dB alarm, IP67 rating, instant app notifications, and Tapo Hub compatibility for comprehensive home water leak detection.
	Tapo T300 Smart Water Leak Sensor Datasheet Datasheet for the Tapo T300 Smart Water Leak Sensor, detailing its features, specifications, and integration into the Tapo Smart Ecosystem. Includes drip and leak alerts, 90 dB alarm, IP67 waterproof rating, and instant app notifications.
	Tapo Smart Home Catalog: Secure and Convenient Living Explore the Tapo smart home catalog featuring smart cameras, sensors, smart plugs, smart LED lamps, and smart buttons. Enhance your home security, monitor your family and pets, and automate your daily life with Tapo's innovative solutions.
	Tapo Smart Water Leak Sensor Quick Start Guide A quick start guide for the Tapo Smart Water Leak Sensor, detailing setup, operation, and battery replacement.
	Tapo Smart Home Products: Cameras, Doorbells, Locks, Vacuums & More Explore the full range of Tapo smart home devices, including security cameras, video doorbells, smart locks, robot vacuums, smart plugs, lighting, and sensors. Discover smart, secure, and easy solutions for your connected home.
	Tapo T100 Smart Motion Sensor Quick Start Guide \| TP-Link Learn how to set up, install, and use the Tapo T100 Smart Motion Sensor. This guide covers power-up, app setup, placement, battery replacement, and safety information for your TP-Link Tapo smart home device.
	Tapo Smart Contact Sensor Quick Start Guide - Setup and Safety Comprehensive quick start guide for the Tapo Smart Contact Sensor (T110). Learn how to install, set up, test, and maintain your device for smart home security. Includes detailed safety warnings and compliance information.
	Tapo Smart Home Solutions Product Overview Explore Tapo's comprehensive range of smart home devices, including HomeBases, cameras, robot vacuums, and smart lighting. Discover how Tapo enhances security, convenience, and automation for a smarter, connected living experience.