Outsunny Garden Storage Shed Assembly Manual

Assembly Preparation

Before beginning construction, please check local building codes regarding footings, location, and other requirements. Study and understand this owner's manual for important information and helpful tips for easier and more enjoyable assembly.

Assembly Instructions

Review all instructions and appropriate information before you begin. Ensure you follow the step sequence carefully for successful results.

Flooring Base

The site must be prepared so that the base of the shed is level all around, verified with a spirit level. The base can be constructed from treated timber or concrete to prevent moisture ingress. The shed is not designed to be built directly on lawn, as the ground can become muddy during rainy days. If a concrete pad is made, it should slope towards the edges to prevent water ingress. Allow time for any concrete or cement to dry before building the shed on top. Bases can also be constructed from bricks, blocks, or mounted on a concrete pad. Bricks or blocks should be cemented onto firm and level concrete footings, and the greenhouse frame drilled and screwed to the base.

Parts and Parts List

Before you start, separate and identify all parts and hardware to ensure you have all necessary parts for your building (refer to the Parts List Page). Do not attempt to assemble the building if parts are missing, as any partially assembled building may be seriously damaged by light winds.

Safety First

1. Select a dry and calm day for assembly. Teamwork (two or more people) is required.
2. Wear safety gloves, eye protection, and long sleeves during assembly to prevent injury. Pay attention to the sharp edges of some parts.
3. Children and pets are not allowed on the construction site.
4. Never concentrate your total weight on the roof of the building. When using a step ladder, ensure it is safe.

Care & Maintenance

1. Keep the shed clean with a soft cloth, using water if necessary.
2. Keep the door tracks clear of dirt and other debris to ensure they slide easily.
3. Clean snow with necessary tools to ensure safe entry. Heavy snow may cause collapse, so ensure safety before entering.
4. The shed is not designed for living in but for storing items.

Parts List

Refer to the following pages for a detailed list of all parts and hardware required for assembly.

Box 1/2:

• P1A (4)
• P2 (4)
• P4A (2)
• P3 (5)
• 25L (1)
• 25R (1)
• D1 (1)
• D2 (1)
• 16 (2)
• 19 (1)
• B1 (2)
• B2 (2)
• B3 (4)

Box 2/2:

• P5 (3)
• P6 (3)
• 13 (2)
• 14 (2)
• 4L (1)
• 4R (1)
• 3L (1)
• 3R (1)
• 5 (1)
• 21L (2)
• 21R (2)
• W1 (2)
• W2 (1)
• W3 (2)
• W4 (2)
• 6 (1)
• 7 (1)
• 8 (1)
• G2 (4)
• 20 (4)
• 27 (2)
• DX1 (2)
• DX2 (2)
• GF (4)
• K (1)
• GE (2)
• GC (4)
• GB (2)
• GD (4)
• F1 (204)
• F2 (102)
• F3 (8)
• S2 (288)
• S1 (142)

Assembly Steps

The following diagrams illustrate the step-by-step assembly process. Please follow each step carefully.

Step 1: Connect part 3L to part 4L using F1 screws.

Step 2: Connect part 4L to part 3L using F1 screws.

Step 3: Attach part 4R to the structure using F1 screws.

Step 4: Attach part 1 to the structure using F1 screws.

Step 5: Attach part 3R to the structure using F1 screws.

Step 6: Attach part 5 to the structure using F1 screws.

Step 7: Assemble the base frame using parts W1, W2, W3, W4, and F1 screws. Ensure correct orientation as shown in the diagram.

Step 8: Attach vertical panels (P2) to the base frame using F1 and S2.

Step 9: Continue attaching vertical panels (P2) to the base frame.

Step 10: Attach panels P1A and P3 using F1, F2, and S2 screws.

Step 11: Continue attaching panels P1A and P3.

Step 12: Attach panels P1A and F2 using F1 and S2 screws.

Step 13: Attach part 9 using F1 and S2 screws.

Step 14: Attach part 11 using F1 and S2 screws.

Step 15: Attach part 10R using F1 and S2 screws.

Step 16: Attach part 10L using F1 and S2 screws.

Step 17: Attach panels P4A using F1 and F2 screws.

Step 18: Install the sliding door tracks (parts 6, 7, 8) using F1 and S2 screws. Ensure correct alignment.

Step 19: Attach panels P3 using F1 and S2 screws.

Step 20: Attach panels 25L and 25R using F1 and S2 screws.

Step 21: Assemble the roof structure using parts 21L, 21R, B1, B2, B3, F2, and S2 screws.

Step 22: Attach roof panels GF using F2 screws.

Step 23: Secure the roof panels with F1 screws.

Step 24: Attach roof panels 13 and 14 using F2 screws. Ensure correct orientation as indicated.

Step 25: Continue attaching roof panels 13 and 14.

Step 26: Secure roof panels with F2 screws.

Step 27: Install roof panels P5 and P6 using F1 and S2 screws.

Step 28: Install remaining roof panels P5 and P6 using F1 and S2 screws.

Step 29: Attach roof panels 15.

Step 30: Attach roof panels 19 and GE using F1 screws.

Step 31: Secure roof panels with GC and S2 screws.

Step 32: Attach door panels D1 and D2 using GB and F2 screws.

Step 33: Assemble door frame components using parts 20, 27, DX1, DX2, and F2 screws.

Step 34: Attach door panels D1 and D2 using GD, F2, and S2 screws.

Step 35: Attach door hinges F3 using G2 screws.

Step 36: Finalize assembly by attaching S1 and S2 components with F1 screws.

Contact Information

For any questions or assistance, please contact the customer care center:

• US: 001-877-644-9366, customerservice@aosom.com
• CA: 416-792-6088, customerservice@aosom.ca
• UK: 0044-800-240-4004, enquiries@mhstar.co.uk
• ES: 0034-931294512, atencioncliente@aosom.es
• PT: 0034-931294512, info@aosom.pt
• DE: 0049-0(40)-88307530, service@aosom.de
• IT: 0039-0249471447, clienti@aosom.it
• FR: 0033-1-84166106, aosom@mhfrance.fr

Please recycle packaging materials responsibly.