Outsunny 9.1'x6.4'x6.3' Garden Storage Shed Assembly Instructions
This document provides comprehensive instructions for assembling your Outsunny garden storage shed. Please read all instructions carefully before beginning.
Estimated Assembly Time: 5 Hours
Tools Recommended: (Not specified in provided snippet, but typically includes screwdriver, wrench, hammer, level)
Parts List
The following parts are included in the kit. Please check all parts against this list before assembly.
Box 1/3
| NO. | PART | Qty. |
|---|---|---|
| D1 | Base Panel | 1 |
| W1 | Screw | 2 |
| D2 | Base Panel | 1 |
| W2 | Screw | 2 |
| P4A | Side Panel Connector | 2 |
| W3 | Screw | 4 |
| P1A | Wall Panel | 2 |
| 20 | Screw | 4 |
| P4B | Side Panel Connector | 1 |
| 27 | Screw | 2 |
| P2 | Wall Panel | 4 |
Box 2/3
| NO. | PART | Qty. |
|---|---|---|
| 25L | Roof Panel | 1 |
| 25R | Roof Panel | 1 |
| P3 | Roof Support | 12 |
| 6 | Screw | 1 |
| 15 | Screw | 4 |
| 16 | Screw | 2 |
| 4L | Wall Panel | 1 |
| 17 | Screw | 2 |
| 4R | Wall Panel | 1 |
| 21L | Roof Panel | 2 |
| 10L | Roof Panel | 1 |
| 21R | Roof Panel | 2 |
| 10R | Roof Panel | 1 |
| 7 | Screw | 1 |
| 9 | Screw | 2 |
| 8 | Screw | 1 |
| 11 | Screw | 2 |
Box 3/3
| NO. | PART | Qty. |
|---|---|---|
| P5 | Door Frame | 2 |
| P6 | Door Frame | 2 |
| P7 | Door Panel | 4 |
| P8 | Door Panel | 2 |
| 3L | Door Hinge | 1 |
| 3R | Door Hinge | 1 |
| 5 | Screw | 4 |
| 13 | Screw | 4 |
| 14 | Screw | 2 |
| 19 | Screw | 2 |
| B1 | Bracket | 2 |
| B2 | Bracket | 4 |
| B3 | Bracket | 1 |
| K | Lock | 2 |
| DX1 | Screw | 4 |
| DX2 | Screw | 2 |
Fasteners
| PART | Qty. |
|---|---|
| M4x10 | 106 |
| M4x10 | 5 |
| 5x16 | 380 |
| 5 | 236 |
Assembly Steps
Step 1
Attach part P1A (x2) to part D1 (x1) using fasteners W1 (x2). Ensure panels are aligned correctly.
Step 2
Connect part D2 (x1) to the assembly from Step 1 using fasteners W2 (x2). This forms the initial base structure.
Step 3
Attach side panel connectors P4A (x2) to the base structure using fasteners W3 (x4). Then, attach wall panel P1A (x2) using fasteners 20 (x4).
Step 4
Continue building the walls. Attach side panel connector P4B (x1) using fasteners 27 (x2). Then, attach wall panels P2 (x4) using fasteners 20 (x4).
Step 5
Assemble the roof structure. Attach roof panels 25L (x1) and 25R (x1) to the top of the wall structure using roof supports P3 (x12) and fasteners 6 (x1), 15 (x4), and 16 (x2).
Step 6
Continue attaching roof panels. Install wall panels 4L (x1) and 4R (x1) using fasteners 17 (x2). Then, attach roof panels 21L (x2), 10L (x1), 21R (x2), and 10R (x1) using fasteners 7 (x1), 9 (x2), 8 (x1), and 11 (x2).
Step 7
Assemble the doors. Attach door frames P5 (x2) and P6 (x2) to door panels P7 (x4) and P8 (x2) using fasteners 5 (x4), 13 (x4), and 14 (x2).
Step 8
Install the doors. Attach door hinges 3L (x1) and 3R (x1) to the door frames using fasteners 19 (x2). Mount the doors onto the shed structure.
Step 9
Secure the shed structure with brackets. Attach brackets B1 (x2), B2 (x4), and B3 (x1) using fasteners DX1 (x4) and DX2 (x2). Install locks K (x2) onto the doors.
Step 10
Final checks. Ensure all screws are tightened and panels are securely fitted. The shed is now ready for use.
