AGPTEK Bluetooth MP3 Player User Manual
Introduction
Thank you for purchasing the AGPTEK MP3 Player. Please read this manual carefully before using the product. Specifications are subject to change without prior notice.
Product Overview
The AGPTEK MP3 Player is a compact, portable device designed for music playback and Bluetooth connectivity.
Buttons and Controls
The device features several buttons and ports:
- Indication Light Hole (1): Shows device status.
- MIC-in (2): Microphone input.
- USB Port (3): For charging and data transfer.
- Headphone Jack (4): For audio output.
The main control interface includes:
- Menu/Mode Button (≡): Press to switch between Bluetooth and MP3 modes.
- Previous/Volume Down Button (-): Click to go to the previous song; hold to decrease the volume.
- Next/Volume Up Button (+): Click to go to the next song; hold to increase the volume.
- Play/Pause/Power Button (▶): Hold to turn the device on/off. Click to play or pause music. Click to answer or refuse an incoming call when Bluetooth is connected.
Basic Operations
Turning On/Off
Hold the [Play/Pause/Power] button to turn the device on or off.
Bluetooth Connectivity
- To turn on the player, hold the [Play/Pause/Power] button. You will hear two beeps. Press the [Menu/Mode] button to switch to Bluetooth mode. Both indicator lights will blink with an audible beep.
- On your smartphone or other Bluetooth-enabled device, turn on Bluetooth, search for, and pair with "AGPTEK A15" (or similar identifier). A clear tinkling sound and slow blinking indicator light confirm a successful connection.
- Note: The initial pairing process connects the device. Subsequent connections will be automatic when Bluetooth is active and the player is in range.
- When a call is received, and the player is connected via Bluetooth, click the [Play/Pause/Power] button to answer or refuse the call.
- While music is playing, click the [Play/Pause/Power] button to pause or resume playback.
- Double-click the [Play/Pause/Power] button to redial the last outgoing call.
Music Playback
- After powering on, press the [Menu/Mode] button (≡) to switch to MP3 Music mode.
- Use the [-] button to go to the previous song and the [+] button for the next song.
- Hold the [-] button to decrease volume and the [+] button to increase volume.
Charging and File Transfer
A clear tinkling sound indicates the player is powering off.
If you hear two beeps without operation, the player's battery needs charging. Connect the player to a computer or a 5V 500-800mA adapter using a micro USB cable.
To transfer music and other files, connect the player to a computer via USB and copy the desired files.
Help and Troubleshooting
- Player does not turn on: Check if the battery is depleted. Connect to a charger and try again after charging.
- Heavy noise during playback:
- Ensure the headphone plug is clean.
- Check if the music file is damaged. Try playing other files to confirm. Damaged files may cause noise or skipping.
- No sound from the player:
- Verify that the volume is not set to zero.
- Ensure the earphones are properly connected to the player.
For any further questions or issues, please contact AGPTEK support at support@agptek.com.
Specifications
| Feature | Details |
|---|---|
| Capacity | 8GB |
| Battery | 3.7V/180mAh lithium battery |
| Dimension | 36(L) * 36(W) * 11(H) mm |
| Weight | 15g |
| Audio Format | MP3/WMA/APE/FLAC/WAV, etc. |
| Charging Time | 1-2 hours |
| Bluetooth Playback | Supports connection with iPhones, Android mobile phones, notebook computers. |
| Playing Time | About 8 hours (after fully-charged) |
