Lumens.JPG

Lumens OIP-N40E Video to IP NDI HX HD Encoder Installation Guide

Lumens OIP-N40E Video to IP NDI HX HD Encoder.png

 

1. Product connection

FIG 1 Product connection.jpg

*OIP-N40E supports PoE (IEEE 802.3af) network switches or USB-C power supply

 

2. Instruction for Installation

FIG 2 Instruction for Installation.JPG

 

3. OIP-N40E Operation Methods

FIG 3 OIP-N40E Operation Methods.JPG

 

FIG 4 OIP-N40E Operation Methods.JPG

 

4. HDMI Signal Source Transmission Network

OIP-N40E can transmit HDMI signal source to IP devices.

4.1 Connection Method

  • Connect the signal source device to the encoder’s HDMI or USB-C input port using HDMI or USB-C cable
  • Connect the encoder and computer to the network switch using network cable
  • Connect the HDMI signal to HDMI IN, and the signal can be captured and synchronized to the display (pass-through)

FIG 5 Connection Method.jpg

4.2 Webpage Settings
[ Stream ] > [ Source ] Select the output signal > [ Stream Type ] Set the stream type > [ Apply ] Apply

4.3 Streaming Output
Open streaming media platforms such as VLC, OBS, NDI Studio Monitor, etc., for streaming output

 

5. USB Network Camera Extension (OIP-N60D Decoder Required)

When used with the OIP-N encoder and decoder, it can extend the range of USB cameras through the network to improve installation flexibility.

5.1 Connection Method

  • Connect the OIP-N encoder/decoder to the local network
  • Connect the USB camera to the decoder using USB-A cable
  • Connect the monitor to the decoder using HDMI cable
  • Connect the computer to the encoder using USB-C cable

FIG 6 Connection Method.jpg

Note:
(1) Computers can use USB-C to connect to encoder and use USB network camera
(2) Computers can project images onto a TV through a USB-C connection to encoder

5.2 OIP-N60D Webpage Settings
[ System ] > [ Output ], open [ USB Extender ]

5.3 OIP-N40E Webpage Settings

  • [ System ] > [ Output ] > [ Extender Source List ]
  • [ Search new Source ] > Click [ Available ] to select the OIP-N60D decoder > Connection displays Connected

5.4 USB Camera Screen Output

  • Launch a video software like Skype, Zoom, Microsoft Teams, or other similar software
  • Choose the video source, to output USB camera images

*Video Source Name: Select according to the USB Camera ID

※ For questions about the installation, please scan the QR Code.
A support person will be assigned to assist you.

FIG 7.JPG

 

Read More About This Manual & Download PDF:

Documents / Resources

Lumens OIP-N40E Video to IP NDI HX HD Encoder [pdf] Installation Guide
OIP-N40E, OIP-N40E Video to IP NDI HX HD Encoder, OIP-N40E, Video to IP NDI HX HD Encoder, to IP NDI HX HD Encoder, IP NDI HX HD Encoder, NDI HX HD Encoder, HX HD Encoder, HD Encoder
Lumens OIP-N40E Video to IP-NDI HX HD Encoder [pdf] Installation Guide
OIP-N40E, OIP-N40E Video to IP-NDI HX HD Encoder, OIP-N40E, Video to IP-NDI HX HD Encoder, IP-NDI HX HD Encoder, HD Encoder, Encoder

References

Leave a comment

Your email address will not be published. Required fields are marked *