LSI LASTEM DYA005 Weather Masts
Product Usage Instructions
Installation on Ground or Concrete Plinth
- Choose the appropriate mast height based on your installation needs.
- If installing on the ground, use the DYA021 tripod. For a concrete plinth, use the DYA020 tripod.
- Ensure proper grounding electric protection during installation.
- Consider using tie-rods for added stability, especially for 3m high masts.
Accessories and Additional Fixing
Refer to the complete range of accessories for fixation on concrete, soil, and walls. Some additional accessories include:
- DYA019 – Joint for mast connection (use with tie-rods set)
- DYA002 – Arm for mast installation on walls
- DYA028 – Set of 3 tie-rods and collar for fixing H 2-3m pole
- DYA026 – Pickets set for tie-rods
Frequently Asked Questions (FAQ)
Q: Can these masts support solar panels?
A: Yes, these masts are suitable for the installation of solar panels along with meteorological equipment and sensors.
H 2…3 meter masts for sensors and data logger installation
- AISI304 stainless steel structure
- Complete range of accessories for fixation on concrete, soil and lateral side of walls
- H 2 and H 3 m models
These masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels. All masts are equipped with grounding electric protection. When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods. When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.
Technical Specifications
| PN | DYA005 | DYA006.1 | DYA010.1 |
| Height | 1 m | 2 m | 3 m |
| Weight | 1.9 Kg | 3.8 Kg | 5.5 Kg |
Common Techinical Specifications
| Use | Support for wind sensors, other sensors mounted on arms and data logger |
| Diameter | Ext. 50 mm int. 47 mm |
| Material | Stainless steel AISI304 |
| Fixing surface | On ground, concrete plinth, wall (see ACCESSORIES) |
Accessories
| Installation on plinth | ||
| DYA020 | Tripod for masts Ø 50 mm concrete plinth installation. Weight: 3.25 kg | |
| DYA020.1 | Set of N.3 anchoring bolts, Ø 12mm for fixing tripods DYA020 on cement plinth. Weight: 1.3 kg | |
| Installation on ground | ||
| DYA021 | Tripod for masts Ø 50 mm ground installation | |
| DYA023 | Set of N.3 pickets for DYA021 | |
DYA020
Tripod for Ø 50 mm pole on concrete plinth 
DYA021
Tripod for Ø 50 mm pole on ground 
DYA023
Ground pickets for DYA021 tripod 
DYA019
Foldable system for mast 50 mm 
DYA002
Collar for jointing two masts 
DYA004
Arm for masts installation on wall
DYA028
Tie-rods set for masts 50 mm
DYA026
Pickets set for tie-rods
LSI LASTEM Srl
Via Ex SP. 161 Dosso, 9 20049 Settala (MI) Italy
Tel. +39 02 954141
Fax +39 02 95770594 Email info@lsi-lastem.com www.lsi-lastem.com
Documents / Resources
 |
LSI LASTEM DYA005 Weather Masts [pdf] Installation Guide DYA005, DYA006.1, DYA010.1, DYA005 Weather Masts, DYA005, Weather Masts, Masts |
