lastem.com
Sensors for Environmental Monitoring - LSI LASTEM
Installation Guide for LSI LASTEM models including: DYA005, DYA006.1, DYA010.1, DYA005 Weather Masts, DYA005, Weather Masts, Masts
Index of /solfycta-uploads/PDF/MW9007
Weather Masts - LSI LASTEM
File Info : application/pdf, 4 Pages, 426.58KB
DocumentDocumentMASTS H 2...3 meter masts for sensors and data logger installation AISI304 stainless steel structure Complete range of accessories for fixation on concrete, soil and lateral side of walls H 2 and H 3 m models These masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels. All masts are equipped with grounding electric protection. When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods. When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expecially when the mast is three meters high. Technical Specifications PN Height Weight DYA005 1 m 1.9 Kg DYA006.1 2 m 3.8 Kg DYA010.1 3 m 5.5 Kg Common Techinical Specifications Use Support for wind sensors, other sensors mounted on arms and data logger Diameter Ext. 50 mm int. 47 mm Material Stainless steel AISI304 Fixing surface On ground, concrete plinth, wall (see ACCESSORIES) Accessories Installation on plinth DYA020 Tripod for masts Ø 50 mm concrete plinth installation. Weight: 3.25 kg DYA020.1 Set of N.3 anchoring bolts, Ø 12mm for fixing tripods DYA020 on cement plinth. Weight: 1.3 kg Installation on ground DYA021 Tripod for masts Ø 50 mm ground installation DYA023 Set of N.3 pickets for DYA021 MW9007-ENG-01-12/11/2024 1 H 2...3 meter masts for sensors and data logger installation Foldable system for masts Ø 50 mm DYA019 Joint (it should be used with tie-rods set) Collar for jointing two masts DYA002 Collar for jointing two masts Ø 50 mm (it should be used with tie-rods set) Arm for masts installation on wall DYA004 Arm for mast Ø 50 mm wall installation (at least one pair required ) Tie-rods set for masts Ø 50 mm DYA028 Set of 3 tie-rods and collar for fixing H 2-3 m pole. Weight: 0.7 kg DYA029 Set of 3 tie-rods and collar for fixing H 2-3 m pole. Stainless steel DYA026 Sets of N.3 pickets for tie-rod fixing on the ground. Weight: 11 kg Upper sleeve to reinforce pole head DYA131 Sleeve to reinforce pole head DYA020 Tripod for Ø 50 mm pole on concrete plinth DYA021 Tripod for Ø 50 mm pole on ground 2 2 DYA023 Ground pickets for DYA021 tripod H 2...3 meter masts for sensors and data logger installation DYA019 Foldable system for mast Ø 50 mm DYA002 Collar for jointing two masts DYA004 Arm for masts installation on wall 3 3 DYA028 Tie-rods set for masts Ø 50 mm H 2...3 meter masts for sensors and data logger installation DYA026 Pickets set for tie-rods LSI LASTEM Srl Via Ex SP. 161 Dosso, 9 20049 Settala (MI) Italy Tel. +39 02 954141 Fax +39 02 95770594 Email info@lsi-lastem.com www.lsi-lastem.com 4 4