LIVARNO home HG10254A 200 Led String Lights Instruction Manual

Operation and safety notes

List of pictograms used
Direct current/voltage
Alternating current/voltage
Splashproof (IP44)
Short-circuit-proof safety isolating transformer
Independent lamp control gear
Protection class II
Polarity of the output terminal
        This icon indicates that the product is mains operated.
Safety information Instructions for use
          HG10254A/HG10254B:Light tail consists of 10 arms, each approx. 1.95 m (visible).With approx. 5 m of power cable HG10254C: Total length: approx. 9.95 m, of which approx. 5 m is power cable.
CE mark indicates conformity with relevant EU directives applicable for this product.
WARNING! The product contains coin cell. Hazardous if swallowed – note the instructions.

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Proper use

This product is equally suitable for operation indoors or outdoors. This product is intended for use in private, domestic enviroment only and not for commercial purposes.

Description of parts and features

  1. Mains adapter
  2. Receiver
  3. Connecting nut
    a Sealing ring
  4. Suction cup (for HG10254A/HG10254B)
  5. Hanger (for HG10254A/HG10254B)
  6. Timer and mode button
  7. Socket of mains adapter
  8. Battery compartment
  9. Battery
  10. IR remote control
    a ON/OFF/TIMER buttons
    b MODE buttons (1-8)
    c DIM +/‒ buttons
  11. Insulation strip
  12. Safety lock (of battery compartment)
  13. Interlock (of battery compartment)

Technical data

LED light chain + Mains adapter 1 : 

Total power consumption (for HG10254A/
HG10254B): approx. 4.5W Total power consumption
(for HG10254C): approx. 1.45W

LED light chain: 

Operating voltage: 4.5V
LEDs: 200 LEDs (LEDs are non-replaceable.)
Degree of protection: IP44 (splash-proof)
Model No.: HG10254A, HG10254B, HG10254C GS certified.

Mains adapter 1 : 

Nom. voltage, primary: 220–240V~, 50/60Hz
Nom. voltage, secondary: 4.5V , 3.6W (for HG10254A/HG10254B) 4.5V , 1.2W (for HG10254C)
Protection class:
Degree of protection: IP44 (splash-proof)
Mains adapter (Model no. LL06-00450800-CT(E)-IP44) (for HG10254A/HG10254B)
Mains adapter (Model no. LL06-00450266-CT(E)-IP44) (for HG10254C) GS tested.

IR remote control 10 :

Battery: 3V, lithium battery, type CR2025
SELV: Safety extra low voltage
Tc: Rated maximum operating temperature of the case of a controlgear

Included items

1 LED tail of lights (for HG10254A/HG10254B)
1 LED light chain (for HG10254C)
1 Mains adapter
1 IR remote control
1 CR2025 battery (Best before: 06/2027)
10 suction cups (for HG10254A/HG10254B)
1 Operating instructions

Safety information

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE!
WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

  • WARNING! DANGER OF DEATH AND ACCIDENTS FOR TODDLERS AND CHILDREN!
    Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep children away from the product at all times.
  • This product is not a toy and should not be played with by children. Children are not able to understand the dangers that can occur when handling this product.
  • This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
  • Ensure that the product is installed by suitably experienced or qualified persons only.

CAUTION! RISK OF OVERHEATING! Do not operate the product inside the packaging.

  • Do not pull the product mains cable and make sure it is laid down properly so that no one walks or trips over it.
  • The product can be used on all surfaces officially classified as being of “normal flammability“.
  • Do not attach any other objects to the product.

Avoid the danger of death from electric shock!

  • Before use, ensure that the mains adapter is connected to mains voltage (220–240V∼).
  • Before connecting the product to the mains you should always check the product and the mains adapter for any damage.
  • Never use the product if you discover that it is damaged in any way.
  • This product‘s external flexible tube is non-replaceable. Hence if it becomes damaged you must dispose of the entire product.
  • This product does not contain any parts which can be serviced by the user. The LEDs cannot be replaced.
  • Only use the product with the supplied mains adapter 1 for the type (Model No.
  • LL06-00450800-CT(E)-IP44 (for HG10254A/ HG10254B), LL06-00450266-CT(E)-IP44 (for HG10254C)); all warranty claims will otherwise expire.
  • Never open any of the electrical parts or insert any kind of object into them.
  • Protect the mains cable from sharp edges, mechanical loads and hot surfaces.
  • Do not install with sharp fasteners or nails.
  • Always unplug the mains adapter from the socket before installation, dismantling or cleaning.
    WARNING!
    KEEP OUT OF REACH OF CHIILDREN! Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately
  • BATTERY WARNING: KEEP OUT OF REACH OF CHILDREN! If the battery compartment does not close securely, stop using the product and keep it away from children.
  • WARNING! CONTAINS SWALLOWABLE BUTTON/COIN CELLS! CHOKING HAZARD!
  • WARNING! This product contains a coin/ button battery. A coin/button battery can cause serious internal chemical burns or death if swallowed.
  • WARNING! Dispose of used batteries immedi- ately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  • Never touch the mains adapter or the product itself with wet hands.
  • The product must not be electrically connected to another set of lights.
  • If the product is not in use for any length of time (e.g. holidays), disconnect it from the power supply.
  • If you have any questions about the product or are unsure about any of its aspects, please seek the advice of an electrical equipment specialist.
  • Please note that the mains adapter continues to draw a small amount of power even if the product is turned off as long as the mains adapter is plugged into a power outlet. To switch the product off completely, unplug the mains adapter from the socket.
  • The LEDs are not replaceable.
  • If the LEDs fail at the end of their lives, the entire product must be replaced.
  • WARNING! This product must not be used without all gaskets (sealing ring 3a ) being properly installed.
  • The LED driver can only be replaced by qualified personnel.
  • The light chain isn’t allowed to connect to 220‒240V~ without LED driver.

Safety instructions for batteries/rechargeable batteries

  • DANGER TO LIFE! Keep batteries/rechargeable batteries out of reach of children. If accidentally  swallowed seek immediate medical attention.
  • Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.
  • DANGER OF EXPLOSION! Never recharge non-rechargeable batteries. Do not short-circuit batteries/rechargeable batteries and/or open them. Overheating, fire or bursting can be the result.
  • Never throw batteries/rechargeable batteries into fire or water.
  • Do not exert mechanical loads to batteries/ rechargeable batteries.

Risk of leakage of batteries/rechargeable batteries

  • Avoid extreme environmental conditions and temperatures, which could affect batteries/rechargeable batteries, e.g. radiators/direct sunlight.
  • If batteries/rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
  • WEAR PROTECTIVE GLOVES!
    Leaked or damaged batteries/rechargeable batteries can cause burns on con tact with the skin. Wear suitable protective gloves at all times if such an event occurs.
  • In the event of a leakage of batteries/rechargeable batteries, immediately remove them from the product to prevent damage.
  • Only use the same type of batteries/rechargeable batteries. Do not mix used and new batteries/ rechargeable batteries.
  • Remove batteries/rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

  • Only use the specified type of battery/rechargeable battery!
  • Insert batteries/rechargeable batteries according to polarity marks (+) and (-) on the battery/rechargeable battery and the product.
  • Use a dry lint-free cloth or cotton swab to clean the contacts on the battery/rechargeable battery and in the battery compartment before inserting!
  • Remove exhausted batteries/rechargeable batteries from the product immediately.
  • KEEP BATTERIES OUT OF THE REACH OF CHILDREN! Swallowing batteries can cause chemical burns, perforation of soft tissue, and death. Severe burns may occur within 2 hours of swallowing batteries. Seek immediate medical attention.

Non-obvious symptoms that might occur because of battery ingestion

Unfortunately, it is not obvious when a button or coin battery is stuck in a child’s esophagus (food pipe).

There are no specific symptoms associated with this.
The child might:

  • cough, gag or drool a lot;
  • appear to have a stomach upset or a virus;
  • be sick;
  • point to their throat or stomach;
  • have a pain in their abdomen, chest or throat;
  • be tired or lethargic;
  • be quieter or more clingy than usual or otherwise “not themselves”;
  • lose their appetite or have a reduced appetite; and not want to eat solid food/be unable to eat solid
    food.
  • These sorts of symptoms vary or fluctuate, with the pain increasing and then subsiding.
  • A specific symptom to button and coin battery ingestion is vomiting fresh (bright red) blood.
  • If the child does this seek immediate medical help.
  • The lack of clear symptoms is why it is important to be vigilant with “flat” or spare button or coin batteries in the home and the products that contain them.

Use (see Fig. A

Note: Remove all packaging materials from the product.
Note: The LEDs are connected in series. If one LED is defective, up to ten LEDs may not light up.

  • Use the supplied suction cup 4 to hang up the product (for HG10254A/HG10254B only).
  • Insert the plug on end of the product into the socket of the mains adapter 7 . Please screw down the connecting nut 3 clockwise and tighten the screw connection. Make sure the sealing ring is correctly seated, otherwise IP protection cannot be guaranteed.
  • Insert the mains adapter 1 into the mains socket.
  • Press the Timer and mode button 6 to switch on the product.
    Press the Timer and mode button 6 again to switch to the next lighting mode. When you reach lighting mode 8, the next press of the Timer and mode button 6 switches the product off.

The light mode is listed as below:

  1. Combination
  2. In wave
  3. Sequential
  4. Slo-Glo
  5. Chasing/flash
  6. Slow fade
  7. Twinkle/flash
  8. Steady on
  9. off

Pull the mains adapter 1 out of the mains socket to completely switch off the product.
Note: The next time the product is switched on, the last selected light mode is automatically applied.

Switching the product on/off using the IR remote control

Note: The infrared receiver is located on the mains adapter 1 . Always aim the IR remote control 10 directly at the receiver 2 for best reception.
Note: Remove the insulating strip 11 from the battery compartment 8 before using the IR remote control 10 for the first time.

  • Ensure that there are no obstacle between the sender and the mains adapter 1 .
  • Press the ON button 10a on the IR remote control 10 to turn on the product.
  • Press the OFF button 10a on the IR remote control 10 to switch off the product.

Controlling the light effects using the IR remote control

The following functions are available: 

Button +: Increase lights intensity
Button -: Reduce lights intensity
Button 1: Combination
Button 2: In wave
Button 3: Sequential
Button 4: Slo-Glo
Button 5: Chasing/flash
Button 6: Slow fade
Button 7: Twinkle/flash
Button 8: Steady on

Note: The off button 10a on the IR remote control 10 is only suitable for switching off temporarily.
To switch off permanently, remove the mains adapter 1 from the socket.

Timer function

  • To switch on the timer function, press and hold the Timer and mode button 6 or press the timer button 10a on IR remote control 10 after the product is connected to the socket of power supply. The
    Timer and mode button 6 will light up green when the timer function is activated.
  • The product lights glow permanently for 6 hours and will be followed by a subsequent pause of 18 hours. Afterwards, the product will light up again at its designated turn on time for 6 hours followed by a subsequent pause of 18 hours.
  • To switch off the timer function, press and hold the Timer and mode button 6 or press the timer button 10a on IR remote control 10 again and the light of the Timer and mode button 6 will be turned off.
  • When the timer function is switched off, the product glows continuously. To switch off the product completely, the mains adapter 1 has to be unplugged from the socket. Timer function can be switched on in the respective desired light mode (1–8).

Replacing the battery (see Fig. B)


If the range of the IR remote control 10 is reduced, you must change the battery 9 .

  1. Press on the safety lock of the battery compartment 12 with a pointed tool (not included) and keep it pressed. In the meantime, release the interlock 13 by pushing it to the center. Then pull the battery compartment 8 out which on the bottom of the IR remote control 10 .
  2. Remove the used battery 9 , if present.
  3. Insert a new battery in the battery compartment 8 .
    Note: Make sure you insert the battery 9 with the correct polarity.
    This is indicated in the back of IR remote control 10.
  4. Close the battery compartment 8 .

Cleaning and care 

AUTION! DANGER OF ELECTRIC SHOCK!
First pull the mains adapter 1 out of the mains socket.
For reasons of electrical safety the product must never be cleaned with water or other liquids or immersed in water.

  • Do not use any solvents, petrol or similar items.
    This would damage the product.
  • Only a dry, lint-free cloth should be used for cleaning.
  • Easy to clean for heavy soiling, with a slightly damp cloth.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics/20–22: paper and fi bre board/80–98: composite materials.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
Faulty or used batteries/rechargeable batteries must be recycled. Return the batteries/rechargeable batteries and the product to the available collection points.
Environmental damage through incorrect disposal of the batteries/ rechargeable batteries!
Batteries/rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries/rechargeable batteries at a local collection point.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery.
In the event of material or manufacturing defects you have legal rights against the retailer of this product.
Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.

Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.

Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.

This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty covers material or manufacturing defects.

This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions

Please have the till receipt and the item number (IAN 459150_2401) available as proof of purchase.
You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you.
Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

      PDF ONLINE
www.lidl-service.com

Service
Service Great Britain
Tel.: 0800 0569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie
Service Northern Ireland
Tel.: 0800 0927852
E-Mail: owim@lidl.ie
IP44
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model-No.: HG10254A/HG10254B/HG10254C
Version: 06/2024
Last Information Update · Version des information’s
Stand van de informatie · Stand der Information:
04/2024 · Ident.-No.: HG10254A/B/C042024-BE

Documents / Resources

LIVARNO home HG10254A 200 Led String Lights [pdf] Instruction Manual
HG10254A, HG10254B, HG10254C, HG10254A 200 Led String Lights, HG10254A, 200 Led String Lights, Led String Lights, String Lights, Lights
LIVARNO home HG10254A 200 LED String Lights [pdf] Instruction Manual
HG10254A, HG10254A 200 LED String Lights, 200 LED String Lights, LED String Lights, String Lights

References

Leave a comment

Your email address will not be published. Required fields are marked *