SKYDANCE V2 Dual Color LED Controller User Manual
Feature
- 4096 levels 0-100% dimming smoothly without any flash.
- Match with RF 2.4G single zone or multiple zone dual color or single color remote control.
- One RF controller accept up to 10 remote control.
- Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
- Synchronize on multiple number of controllers.
- Fade in and out effect selectable.
- 3 levels color temperature (WW, NW and CW) selectable by continuous power off and on operation.
Technical Parameters
| Input and Output | |
| Input voltage | 12-24VDC |
| Input current | 10.5A |
| Output voltage | 2x(12-24)VDC |
| Output current | 2CH,5A/CH |
| Output power | 2x(60-120)W |
| Output type | Constant voltage |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| Case temperature (Max.) | T c: +85OC |
| IP rating | IP20 |
| Warranty and Protection | |
| Warranty | 5 years |
| Protection | Reverse polarityShort circuit |
| Dimming data | |
| Input signal | RF 2.4GHz |
| Control distance | 30m(Barrier-free space) |
| Dimming gray scale | 4096 (2^12) levels |
| Dimming range | 0 -100% |
| Dimming curve | Linear |
| PWM Frequency | 2KHz (default) |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
| Weight | |
| Net weight | 0.038kg |
| Gross weight | 0.049kg |
Mechanical Structures and Installations
DIMANSION
Note: Continuously switch off and on the power supply two times rapidly, It will change 3 levels color temperature (WW, NW and CW) in sequence.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Application notes
All the receivers in the same zone.
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.
Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Dual color control
WW=Warm white LED
CW=Cool white LED
Each channel can supply up to 120W(@24V) and white balance can be controlled as such
| Color temperature | Cool white | Neutral white | Warm white |
| Power distribution | WW=0W,CW=120W | WW=60W,CW=60W | WW=120W,CW=0W |
Linear dual color tuning
Dimming curve
Fade in and Fade out Setting
Long press match key 5s, then short press match key 3 times, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s.
Malfunctions Analysis & Troubleshooting
| Malfunctions | Causes | Troubleshooting |
| No light |
|
|
| Uneven intensity between front and rear,with voltage drop |
|
|
| No response from the remote |
|
|
Documents / Resources
 |
SKYDANCE V2 Dual Color LED Controller [pdf] User Manual V2, Dual Color LED Controller, V2 Dual Color LED Controller, LED Controller, Controller |
