SKYDANCE F1-D 3-Key Single Color LED IR Controller User Manual
SKYDANCE F1-D 3-Key Single Color LED IR Controller

Product Overview

PRODUCT OVERVIEW

Features

  • 1 channel constant voltage single color LED mini controller.
  • 3 key operation with on/off and dimming.
  • 5A output, connect with 5 meters single color LED strip.
  • 8192 levels 0-100% dimming smoothly without any ash.

Technical Parameters

Input and Output
Input voltage 12-24VDC
Output voltage 12-24VDC
Output current Max. 5A
Output type Constant voltage
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD) EN 62368-1:2020+A11:2020
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certification CE,EMC,LVD,RED
Warranty and Protection
Warranty 5 years
Protection Reverse polarity Over heat Short circuit
Dimming data
Input signal IR
Control distance 10m(Barrier-free space)
Dimming gray scale 8192 (2^13) levels
Dimming range 0 -100%
Dimming curve Logarithmic
PWM Frequency 2000Hz (default)
Environment
Operation temperature Ta: -30 OC ~ +55 OC
Case temperature (Max.) T c:+85OC
IP rating IP20

Dimension

Product Dimension

Wiring Diagram

Wiring Diagram

Key Function of controller

Button Icon :Turn on or off light.
Button Icon :Brightness -, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
Button Icon :Brightness +, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.

Key Function of remoter

Remote Control

  • Button Icon: Turn on the light
  • Button Icon: Turn off the light.
  • Button Icon: Increase brightness,
    Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
  • Button Icon: Decrease brightness,
    Short press 10 levels, long press 1-6s for continuous 256 levels adjustment

Dimming Curve

Dimming Curve

Malfunctions analysis & troubleshooting

Malfunctions

Causes

Troubleshooting

No light
  1. No power.
  2. Wrong connection or insecure.
  1. Check the power.
  2. Check the connection.
No response from the remote
  1. The battery has no power.
  2. Beyond controllable distance.
  1. Replace battery.
  2. Reduce remote distance.

 

Documents / Resources

SKYDANCE F1-D 3-Key Single Color LED IR Controller [pdf] User Manual
F1-D, 3-Key Single Color LED IR Controller, F1-D 3-Key Single Color LED IR Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *