GODIAG GT115 For V-A-G MQB IMMO4
CAN-Bus UDS 4th Generation IMMO
System Test Platform
Manual Bikarhêner
202506
Product Overview
MQB models may range from superminis to large family cars, replacing the current generations of models. The MQB architecture replaces the PQ25, PQ35 and PQ46 platforms. Our product is a connecting cable designed for the MQB IMMO system, enabling engineers to conveniently perform off-vehicle operations such as IMMO programming, matching, and diagnostics on the MQB IMMO system.
Wekî din, ew PIN-ek POGO heye ku daneyan li ser dashboardê bixwîne û binivîse, ku ji bo girtinê aramtir e û zirarê nade kabloyê.
Fonksiyon:
- Tesbîtkirina hevdem a mifteyê û modula IMMO ya wesayîtê
- Tesbîtkirina serbixwe ya motorê û modula berfirehkirina hêzê.
- Tesbîtkirina ragihandinê û ceribandina bernamekirina modula motorê û modula hêzê bi rêya modula dergehê
- IMMO nifşa 4emîn POGO PIN daneyan dixwîne û dinivîse û tespîtkirina hevrêzkirina mifteyê
- Modula BCM bi modula dergehê ve girêbide ji bo teşhîsa ragihandinê û ceribandina bernamekirinê (Nîşe: Dema ku pêwîst be, guhêrbarê têkildar bikirtînin.)
- Tesbîtkirina modula dergehê
- Volume ya dabînkirina hêzê ya girêdayî ya heyîtage display
- Nîşandana niha ya modula girêdayî
- 2032 voltaja bataryayêtage tespîtkirin.
- Bi POGO PIN-ê re ji bo xwendin û nivîsandina daneyan li ser dashboardê.
Gavên Tesbîtkirina Mifteyan Bi Bikaranîna Platforma IMMO 4 CAN-BUS UDS
Asta 1ê: Connect the GT115 to the dashboard and connect it to the power supply.
Asta 2ê: Press the start button, press the ignition button, and then press the Dash button.
Asta 3ê: The instrument panel displays safe, and the key sensor coil flashes for 3 seconds and then goes out. It indicates that the key is not recognized.
Asta 4ê: Connect the GT115 to the dashboard and connect it to the power supply.
Asta 5ê: Press the start button, press the ignition button, and then press the Dash button.
Asta 6ê: The instrument panel displays the mileage, and the key sensor coil flashes and then goes out. It indicates that the key has been identified.
Gavên Bikaranîna POGO PIN li ser Platforma IMMO 4 CAN-BUS UDS
Gav 1: GT115 bi panela amûran ve girêbide û vêxe.
Asta 2ê: First press the red ignition button, then press the “Dash” button
Asta 3ê: Then use the pogo pin probe to poke the pogo pin point in the instrument chip.
Asta 4ê: After poking, do not let go and press the start button again.
Asta 5ê: Wait for 5 seconds and then release the pogo pin probe.
Asta 6ê: At this time, only one light is on, indicating that the instrument has successfully entered the pogo pin mode.
Gavên Bikaranîna li ser Platforma MQB
Asta 1ê: Connect the gateway.
Asta 2ê: Connect the BCM module.
Asta 3ê: Connect the instrument.
Asta 4ê: Connect the engine.
Gav 5: Di dawiyê de, hêzê vekin.
Gav 6: Bişkoka destpêkirinê û bişkoka sor a guhêrbarê şewatê dîsa bikirtînin.
Gav 7: Dûvre hûn dikarin cîhazên din ji bo ceribandin, teşhîs, bernamekirin û kodkirinê ve girêdin.
Gavên Bikaranîna Ragihandina Serbixwe ya Motorê
Asta 1ê: Connect the engine with colored jumper wires.
Gav 2: Bi hêzê ve girêdin.
Asta 3ê: Press in sequence: power switch start, ignition switch IGN, engine button switch ENG.
Asta 4ê: Then connect other devices to the OBD port for testing and diagnosis.
Vêra:
1pc x GT115 MQB IMMO4 CAN-Bus UDS 4th Generation IMMO System Test Platform 1pc x PDF manual
Shenzhen Sinoy Technology Co., Ltd
Hemû maf parastî ne
www.godiag.com
+86 18813687743
Sales@GoDiag.com
https://h5.shengcai.net/wwei/url?url=H666G_0Kx6G
Spas ji bo xwendinê!
Belge / Çavkanî
 |
GODIAG GT115 IMMO4 CAN Bus UDS Test Platform [pdf] Rêbernameya Bikarhêner GT115, GT115 IMMO4 CAN Bus UDS Test Platform, GT115, IMMO4 CAN Bus UDS Test Platform, UDS Test Platform, Test Platform, Platform |