MAX 로고

MAX 센서 MX0054 TPMS 센서

MAX-sensor-MX0054-TPMS-Sensor-product

사용 설명서

  1. 나사
  2. 센소
  3. 밸브 스템
  4. 너트
  5. 밸브 캡

MAX-sensor-MX0054-TPMS-Sensor- (2)주의:

  • The MAX assemblies are replacements or maintenance parts for vehicles that have factory installed TPMS.
  • Make sure to program sensor by using the MAX program ming tool for your specific vehicle make, model and year prior to installation.
  • In order to guarantee optimal function, the sensor may only be installed with valves and accessories by MAX.
  • Upon completion of installation, test the vehicles TPMS system using procedures described in the original manufacturer’s user guide to confirm proper installation and functionality.

설치

  1. 밸브 너트를 제거합니다.
  2. 림 구멍을 통해 밸브를 통과시키고 너트를 장착한 후 4Nm의 토크 렌치를 사용하십시오. 밸브가 올바르게 장착되었는지 확인하십시오.
  3. 타이어를 장착하고, 장착 시 센서가 손상되지 않았는지 확인하십시오.
  4. 밸브 캡을 제거하고 차량 사양에 맞는 올바른 타이어 공기압으로 타이어에 공기를 주입하십시오. 밸브 캡을 다시 조이십시오.

MAX-sensor-MX0054-TPMS-Sensor- (1)Please note the vehicle manu­facturer-specific learning method, which you can find in the vehicle manual or in our MAX Sensor programming device.

제한 보증

MAX warrants to the original purchaser that the TPMS sensor complies with MAX product specifications and shall be free from defects in material and workmanship under normal and intended use for a period of sixty (60) months or fifty thousand (50,000)miles, whichever occurs first, from the date of purchase. The warranty shall be void if any of the following should occur:

  1. Improper or incomplete installation of products.
  2. 부적절한 사용.
  3. Introduction of defects by other products.
  4. Mishandling of products and/or any modifications to the products.
  5. Incorrect application.
  6. Damage due to collision or tire failure.
  7. Racing or competition.

MAX’s sole and exclusive obligation under this warranty will be to repair or replace, at MAX’s discretion, without charge. Any merchandise that does not conform to this above warranty should be returned with a copy of the original sales receipt to the dealer from whom the product was originally purchased. Notwithstanding the foregoing, in the event that the product is no longer available, MAX’s liability to the original purchaser shall not exceed the actual amount paid for the products.
OTHER THAN AS EXPRESSLY STATED HEREIN, MAX GIVES NO WARRANTIES HEREUNDER ON THE MAX AND HEREBY EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND/OR NONINFRINGEMENT. IN NO EVENT WILL MAX BE LIABLE TO ANY PURCHASER ARISING OUT OF ANY CLAIM, DEMAND, SUIT, ACTION, ALLEGATION, OR ANY OTHER PROCEEDING INVOLVING MAX THAT HAVE BEEN ALTERED OR REPAIRED OTHER THAN BY MAX OR AN AUTHORIZED DEALER OR INSTALLED ON CUSTOMIZED VEHICLES (I.E., NON-OEM VEHICLES) OR FOR INCIDEN­TAL AND CONSEQUENTIAL DAMAGES (e.g., loss of time, loss of use of vehicle, towing charges, road services, and inconveniences).·

FCC 성명

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detennined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • 수신 안테나의 방향을 바꾸거나 위치를 바꾸세요.
  • 장비와 수신기 사이의 거리를 넓힙니다.
  • 수신기가 연결된 것과 다른 회로의 콘센트에 장비를 연결하세요.
  • 도움이 필요하면 딜러나 숙련된 라디오/TV 기술자에게 문의하세요.

주의: 제조업체의 명확한 승인 없이 본 장치를 변경하거나 개조하는 경우 본 장비를 작동하는 권한이 무효화될 수 있습니다.
이 장치는 FCC 규정의 15부를 준수합니다. 작동은 다음 두 가지 조건에 따릅니다.

  1.  이 장치는 유해한 간섭을 일으키지 않으며,
  2. 이 장치는 원치 않는 작동을 일으킬 수 있는 간섭을 포함하여 수신되는 모든 간섭을 수용해야 합니다.

RF 노출 정보
이 장비는 통제되지 않은 환경에 대해 설정된 FCC 방사선 노출 한도를 준수합니다. 이 장비는 라디에이터와 신체 사이에 최소 20cm의 거리를 두고 설치 및 작동해야 합니다.

문서 / 리소스

MAX 센서 MX0054 TPMS 센서 [PDF 파일] 사용설명서
2BC6S-GEN5N, 2BC6SGEN5N, MX0054 TPMS 센서, MX0054, TPMS 센서, 센서

참고문헌

댓글을 남겨주세요

이메일 주소는 공개되지 않습니다. 필수 항목은 표시되어 있습니다. *