MAX sentsorea MX0054 TPMS sentsorea

Argibideen eskuliburua

1. Torlojua
2. Senso
3. Balbula zurtoina
4. Intxaurra
5. Balbula Cap

KONTUZ:

• The MAX assemblies are replacements or maintenance parts for vehicles that have factory installed TPMS.
• Make sure to program sensor by using the MAX program ming tool for your specific vehicle make, model and year prior to installation.
• In order to guarantee optimal function, the sensor may only be installed with valves and accessories by MAX.
• Upon completion of installation, test the vehicles TPMS system using procedures described in the original manufacturer’s user guide to confirm proper installation and functionality.

Instalazioa

1. Kendu balbula azkoina.
2. Pasatu balbula ertzaren zulotik, eta muntatu azkoina, erabili 4 Nm-ko giltza dinamometricoa. Ziurtatu balbula behar bezala kokatuta dagoela.
3. Muntatu pneumatikoa, mesedez, ziurtatu sentsorea ez dela hondatzen muntatzean.
4. Kendu balbulen tapoia eta puztu pneumatikoen presio zuzena ibilgailuaren zehaztapenaren arabera. Itzuli berriro balbula-kapa.

Please note the vehicle manu­facturer-specific learning method, which you can find in the vehicle manual or in our MAX Sensor programming device.

BERME MUGATUA

MAX warrants to the original purchaser that the TPMS sensor complies with MAX product specifications and shall be free from defects in material and workmanship under normal and intended use for a period of sixty (60) months or fifty thousand (50,000)miles, whichever occurs first, from the date of purchase. The warranty shall be void if any of the following should occur:

1. Improper or incomplete installation of products.
2. Erabilera desegokia.
3. Introduction of defects by other products.
4. Mishandling of products and/or any modifications to the products.
5. Incorrect application.
6. Damage due to collision or tire failure.
7. Racing or competition.

MAX’s sole and exclusive obligation under this warranty will be to repair or replace, at MAX’s discretion, without charge. Any merchandise that does not conform to this above warranty should be returned with a copy of the original sales receipt to the dealer from whom the product was originally purchased. Notwithstanding the foregoing, in the event that the product is no longer available, MAX’s liability to the original purchaser shall not exceed the actual amount paid for the products.
OTHER THAN AS EXPRESSLY STATED HEREIN, MAX GIVES NO WARRANTIES HEREUNDER ON THE MAX AND HEREBY EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND/OR NONINFRINGEMENT. IN NO EVENT WILL MAX BE LIABLE TO ANY PURCHASER ARISING OUT OF ANY CLAIM, DEMAND, SUIT, ACTION, ALLEGATION, OR ANY OTHER PROCEEDING INVOLVING MAX THAT HAVE BEEN ALTERED OR REPAIRED OTHER THAN BY MAX OR AN AUTHORIZED DEALER OR INSTALLED ON CUSTOMIZED VEHICLES (I.E., NON-OEM VEHICLES) OR FOR INCIDEN­TAL AND CONSEQUENTIAL DAMAGES (e.g., loss of time, loss of use of vehicle, towing charges, road services, and inconveniences).·

FCC Adierazpena

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detennined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Berbideratu edo lekuz aldatu antena hartzailea.
• Handitu ekipoaren eta hargailuaren arteko bereizketa.
• Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
• Kontsultatu banatzaileari edo irrati/telebistako teknikari esperientziadun bati laguntza lortzeko.

Kontuz: Fabrikatzaileak berariaz onartzen ez duen gailu honetan egindako aldaketak edo aldaketak ekipo hau ustiatzeko baimena baliogabetu dezake.
Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua honako bi baldintza hauen menpe dago:

1.  Baliteke gailu honek ez du interferentzia kaltegarririk eragin, eta
2. Gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.

RF Esposizioari buruzko informazioa
Ekipo honek kontrolatu gabeko ingurune baterako ezarritako FCC erradiazioaren esposizio-mugak betetzen ditu. Ekipo hau erradiadorearen eta gorputzaren artean gutxienez 20 cm-ko distantzian instalatu eta funtzionatu behar da.

Dokumentuak / Baliabideak

MAX sentsorea MX0054 TPMS sentsorea [pdf] Argibideen eskuliburua 2BC6S-GEN5N, 2BC6SGEN5N, MX0054 TPMS sentsorea, MX0054, TPMS sentsorea, sentsorea

Erreferentziak

• Erabiltzailearen eskuliburua