Kmart 120 LED Solar String Lights Instructions

 

Instructions:

  1. Assemble the solar panel as shown in the picture.
    a close up of a device
    • A-Solar Panel
      a close up of a phone
    • B-Base Plate
      a close up of a device
    • C- Plastic Cylinder
    • D-Plastic Spike
  2. Attach part B on to the back of solar panel A, then attach C to B and D to C by pressing firmly.
  3. Turn the unit on. You will only need to do this once, as the solar panel will turn the lights on and off automatically. Then you can choose the working functions by Mode switch.
  4. Place entire unit in a sunny position. Direct sunlight will yield the best results.

Specification:

120 LED Solar String Lights
Solar Panel: 2V/70mA
1pc Ni-Cd Rechargeable Battery 1.2V, 400mAH
12 Functions White Light

IMPORTANT:

  • Charge battery for at least 8 hours before first use.
  • The solar light panel MUST be placed in a well-lit location for
    maximum sunlight. Anything that shades the panel will affect the brightness and lighting duration
  • Put the switch on the “OFF” position when not in use.
  • Use a damp cloth to clean it when there is a buildup of dust and/or dirt on the surface of the solar panel.

WARNING:
FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.

 

Documents / Resources

Kmart 120 LED Solar String Lights [pdf] Instructions
120 LED Solar String Lights, 42038382

Leave a comment

Your email address will not be published.