VACUS TECH Logo

សៀវភៅណែនាំ

TECH ESP32 WROOM Evaluation Board

Explore the Future of Location Precision with the ESP-DW1000 Evaluation Board
Your Journey towards Innovation Begins with the ESP32-DW1000

ក្រុមប្រឹក្សាវាយតម្លៃ VACUS TECH ESP32 WROOM

វីដេអូសាកល្បង

Click on the link below to open the video.
Copy and Paste the URL ចូលទៅក្នុងកម្មវិធីរុករក។
https://drive.google.com/file/d/1iL8BeEW0ehmeyeVX73UecmaHvSlwtUk/view

Using the ESP32 DW1000 UWB Board with Arduino IDE

នៅក្នុងការណែនាំនេះ យើងនឹងរៀនពីរបៀបប្រើក្តារ ESP32 DW1000 UWB (Ultra Wideband) ជាមួយនឹង Arduino IDE ដើម្បីវាស់ចម្ងាយរវាងក្តារពីរ។ សម្រាប់គម្រោងនេះ អ្នកនឹងត្រូវការក្តារមួយគូ។ យើងនឹងអនុវត្តតាមជំហានមួយចំនួនដើម្បីដំឡើងម៉ូឌុល។
2.1 ការដំឡើងបណ្ណាល័យ DW1000
ដំបូងអ្នកនឹងត្រូវដំឡើងបណ្ណាល័យ Arduino-DW1000 ពី Thotro ។ បណ្ណាល័យនេះផ្តល់នូវមុខងារចាំបាច់ដើម្បីធ្វើការជាមួយបន្ទះឈីប DW1000 របស់ Decawave និងម៉ូឌុលនៅក្នុងបរិស្ថាន Arduino ។

VACUS TECH ESP32 WROOM Evaluation Board - Library

អ្នកក៏អាចដំឡើងបណ្ណាល័យនេះដោយប្រើកម្មវិធីគ្រប់គ្រងបណ្ណាល័យផងដែរ។ គ្រាន់តែស្វែងរក "DW1000" ហើយចុច "ដំឡើង" ដើម្បីបន្ថែមបណ្ណាល័យទៅ Arduino IDE របស់អ្នក។
2.2 ការកែប្រែបណ្ណាល័យ
The DW1000 UWB library doesn’t compile directly for ESP32 boards, so we need to make some modifications.
First, navigate to the Arduino library folder and locate the DW1000 folder. Inside that folder, open the “src” folder to access the library’s source files.

VACUS TECH ESP32 WROOM Evaluation Board - filesOpen the “src” folder and find the DW1000.cpp file. Use a text editor, such as Notepad++, to open this file.VACUS TECH ESP32 WROOM Evaluation Board - files 1 ។បន្ទាប់មក កំណត់ទីតាំងបន្ទាត់ខាងក្រោម (បន្ទាត់ 172) ហើយបញ្ចេញមតិទាំងបីបន្ទាត់។

VACUS TECH ESP32 WROOM Evaluation Board - commentនៅពេលដែលបន្ទាត់ទាំងនេះត្រូវបានបញ្ចេញមតិ លេខកូដបណ្ណាល័យនឹងចងក្រងដោយជោគជ័យ។
2.3 ការជ្រើសរើសក្តារ
Connect the pair of ESP32 Wrover boards to two different USB ports on your computer using micro-USB cables. In the Arduino IDE, select the development board: choose “ESP32 Dev Module” if you are using the ESP32 UWB board with the ESP32 WROOM chip. If you have the ESP32 UWB board with the ESP32 WROVER chip, select “ESP32 WROVER Module.”

VACUS TECH ESP32 WROOM Evaluation Board - Board

Also, make sure to select the correct COM port, which you can find in the Device Manager. Your ESP32 Ultra Wideband board is now set up for serial communication.

ផ្នែករឹង

VACUS TECH ESP32 WROOM Evaluation Board - Hardware

VACUS TECH Logo

ឯកសារ/ធនធាន

ក្រុមប្រឹក្សាវាយតម្លៃ VACUS TECH ESP32 WROOM [pdf] សៀវភៅណែនាំ
ESP32 WROOM, ESP32 WROVER, ESP32 WROOM ក្រុមប្រឹក្សាវាយតម្លៃ, ក្រុមប្រឹក្សាវាយតម្លៃ WROOM, ក្រុមប្រឹក្សាវាយតម្លៃ, ក្រុមប្រឹក្សាភិបាល

ឯកសារយោង

ទុកមតិយោបល់

អាសយដ្ឋានអ៊ីមែលរបស់អ្នកនឹងមិនត្រូវបានផ្សព្វផ្សាយទេ។ វាលដែលត្រូវការត្រូវបានសម្គាល់ *