Model
Nomer Model: VD3
3 saluran konstan voltage/Maks 4.5A output/3-tombol/Remote kontrol nirkabel/Step-less dimming
Fitur
- 3-saluran konstan voltage RGB LED RF controller.
- 1.5A saben saluran, output nyambungake karo 5 meter RGB LED strip.
- 3 tombol operasi karo on/off, mode lan imbuhan werna.
- Cocokake karo zona tunggal 2.4G utawa sawetara zona RGB remot kontrol opsional.
- 256 tingkat 0-100% dimming lancar tanpa lampu kilat.
- Dibangun ing 10 mode dinamis, kalebu gaya lompat utawa owah-owahan bertahap.
Parameter teknis
| Input lan Output | |
| Input voltage | 5-24VDC |
| Output voltage | 5-24VDC |
| Output saiki | 3CH, 1.5A/CH |
|
daya output |
22.5W@5V
54W@12V 108W@24V |
| Lingkungan | |
| Suhu operasi | Ta: -30 OC ~ +50 OC |
| Suhu kasus (Maks.) | Tc: +85 OC |
Dimming data
| Sinyal input | 3 tombol + RF 2.4GHz |
| Kontrol jarak | 30m (ruang bebas hambatan) |
| Dimming grayscale | 4096 (2^12) tingkat |
| Rentang dimming | 0 -100% |
| Dimming kurva | Logaritma |
| Frekuensi PWM | 2KHz (standar) |
| Garansi | 5 taun |
| pangayoman | Over-heat |
| Safety lan EMC | |
|
Standar EMC (EMC) |
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Standar safety | EN 62368-1:2020+A11:2020 |
| Peralatan Radio (RED) | ETSI EN 300 328 V2.2.2 |
| Kation certi | CE, EMC, RED |
| Paket | |
| Ukuran | W120 x L43 x H27 mm |
| Bobot reged | 0.013 kg |
ukuran
Wiring Diagram
Cathetan:
- Pencet terus tombol
lan
tombol kanggo 2s, output LED kelip-kelip 3 kaping, lan cahya ing / mati fade wektu bakal ngganti antarane 3s lan 0.5s. - Pencet terus tombol,
lan tombol kanggo 2s, output LED kelip-kelip kaping pirang-pirang, ngalih ing antarane "GRB" (kerlip 1 wektu), "RGB" (kerlip 2 kaping), "BRG" (kerlip 3 kaping) lan "BGR" (kerlip 4 kaping) urutan output, standar yaiku GRB.
- : Nguripake utawa mateni lampu.
- : Pencet cendhak kanggo ngganti 24 werna RGB statis, penet dawa kanggo 1-6s kanggo nyetel 256 tingkat padhange terus-terusan.
- : Pencet cendhak kanggo ngganti 10 mode dinamis, penet dawa 2s kanggo nyetel kacepetan, 10 tingkat.
Dhaptar mode dinamis:
Cocokake Remote Control
Cocokake Remote Control (opsional)
Pangguna pungkasan bisa milih cara sing cocog / mbusak. Ana rong pilihan kanggo milih:
Gunakake lan tombol
Cocokake:
- Tekan dawa lan tombol 2s, output LED blinks 2 kaping, langsung pencet tombol on / off (remot zona siji) utawa tombol zona (remot sawetara zona) saka remot.
- Output LED kedhip 3 kaping tegese pertandhingan sukses.
Mbusak:
Pencet terus lan tombol kanggo 5s kanggo mbusak kabeh cocog, Output LED blinks 5 kaping tegese kabeh remot cocog padha dibusak.
Gunakake Power Wiwiti maneh
Cocokake:
- Pateni daya, banjur urip maneh daya, lan langsung pencet tombol on/off (remot zona siji) utawa tombol zona (remot zona pirang-pirang) 3 kaping ing remot.
- Output LED kedhip 3 kaping tegese pertandhingan sukses.
Mbusak:
- Pateni daya, banjur urip maneh daya, lan langsung pencet tombol on/off (remot zona siji) utawa tombol zona (remot zona pirang-pirang) 5 kaping ing remot.
- Output LED kedhip 5 kaping tegese kabeh remot sing cocog wis dibusak.
Dimming kurva
Dokumen / Sumber Daya
 |
SuperLightingLED VD3 3 Tombol RF RGB LED Controller [pdf] Manual Pamilik VD3, VD3 3 Tombol RF RGB LED Controller, 3 Tombol RF RGB LED Controller, RF RGB LED Controller, RGB LED Controller, LED Controller, Controller |