Mehlala
Nomoro ea mohlala: VD3
3 channel kamehla voltage/Max 4.5A output/3-button/taolo e se nang mohala e se nang mohala/ho fifala ho sa feleng
Likaroloana
- 3-channel constant voltage RGB LED RF molaoli.
- 1.5A mocha ka mong, tlhahiso e hokahana le 5 metres RGB LED strip.
- Ts'ebetso ea likonopo tse 3 ka ho tima / ho tima, mokhoa le phetoho ea mebala.
- Bapisa le sebaka se le seng sa 2.4G kapa libaka tse ngata tsa RGB tsa remoutu ka boikhethelo.
- Maemo a 256 0-100% a fifala ka thelelo ntle le khanya ea letho.
- E hahelletsoeng ka mekhoa e 10 e matla, ho kenyelletsa le ho tlola kapa ho fetoha butle butle.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 5-24VDC |
| Sephetho voltage | 5-24VDC |
| Sephetho sa hajoale | 3CH, 1.5A/CH |
|
Matla a hlahisang |
22.5W @ 5V
54W @ 12V 108W @ 24V |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +50 OC |
| Thempereichara ea boholo (Boholo.) | Tc: +85 OC |
Ho fokotsa data
| Lets'oao la ho kenya | 3 konopo + RF 2.4GHz |
| Bohole ba ho laola | 30m(Sebaka se senang mekoallo) |
| Sekhahla sa 'mala o mosehla | 4096 (2^12) maemo |
| Lebala la dimming | 0 -100% |
| Lekhalo le nyenyefatsang | Logarithmic |
| Maqhubu a PWM | 2KHz (ea kamehla) |
| Tiisetso | 5 lilemo |
| Tshireletso | Mocheso o feteletseng |
| Tšireletseho le EMC | |
|
EMC e tloaelehileng (EMC) |
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Tekanyetso ea polokeho | EN 62368-1:2020+A11:2020 |
| Thepa ea Radio(RED) | ETSI EN 300 328 V2.2.2 |
| Setifikeiti | CE, EMC, RED |
| Sephutheloana | |
| Boholo | W120 x L43 x H27mm |
| Boima bo felletseng | 0.013kg |
Boemo
Setšoantšo sa Wiring
Hlokomela:
- Tobetsa o hatelle
le
konopo bakeng sa 2s, tlhahiso ea LED e bonesa makhetlo a 3, 'me nako ea ho tima / ho tima e tla fetoha pakeng tsa 3s le 0.5s. - Tobetsa o hatelle,
le konopo bakeng sa 2s, tlhahiso ea LED e bonesa ka makhetlo a mangata, e fetola pakeng tsa "GRB" (e khantša nako e le 'ngoe), "RGB" (e benya ka makhetlo a 1), "BRG" (e benya ka makhetlo a 2) le "BGR" (e phatsima makhetlo a 3) tatellano ea tlhahiso, kamehla ke GRB.
- : Bulela kapa tima lebone.
- : Tobetsa e khutšoanyane ho fetola mebala ea 24 static RGB, tobetsa nako e telele bakeng sa 1-6s ho fetola maemo a 256 a khanya ka ho tsoelang pele.
- : Tobetsa e khuts'oane ho fetola mekhoa e 10 e matla, tobetsa 2s nako e telele ho fetola lebelo, maemo a 10.
Lenane la maemo a matla:
Match Remote Control
Papali ea Remote Control (ha boikhethelo)
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:
Sebelisa le konopo
Papali:
- Tobetsa nako e telele le konopo ea 2s, tlhahiso ea LED e benya makhetlo a 2, hang-hang tobetsa konopo ea ho tima/ho tima (remoutu ea sebaka se le seng) kapa konopo ea zone (multiple zone remote) ea remote.
- LED e hlahisoang e panya ka makhetlo a 3 e bolela hore papali e atlehile.
Hlakola:
Tobetsa o hatelle le konopo bakeng sa 5s ho hlakola lipapali tsohle, LED e hlahisoang e panya ka makhetlo a 5 e bolela hore li-remote tsohle tse tšoanang li hlakotsoe.
Sebelisa Power Restart
Papali:
- Tima motlakase, ebe o kenya motlakase hape, 'me hang-hang o tobetse konopo ea ho tima/ho tima (remoutu ea zone e le' ngoe) kapa konopo ea zone (multiple zone remote) makhetlo a 3 ho remoutu.
- LED e hlahisoang e panya ka makhetlo a 3 e bolela hore papali e atlehile.
Hlakola:
- Tima motlakase, ebe o kenya motlakase hape, 'me hang-hang o tobetse konopo ea ho tima/ho tima (remoutu ea zone e le' ngoe) kapa konopo ea zone (multiple zone remote) makhetlo a 5 ho remoutu.
- LED e hlahisoang e panya ka makhetlo a 5 e bolela hore li-remote tsohle tse tšoanang li hlakotsoe.
Lekhalo le nyenyefatsang
Litokomane / Lisebelisoa
 |
SuperLightingLED VD3 3 Konopo RF RGB LED Controller [pdf] Buka ea Mong'a VD3, VD3 3 Button RF RGB LED Controller, 3 Button RF RGB LED Controller, RF RGB LED Controller, RGB LED Controller, LED Controller, Controller |