RND 320-KA Series siji Saluran Remote Control Syntax V3.0
Format prentah: VSET :
- VSET: Header printah
- X: saluran output
- pemisah
- NR2: paramèter
Rincian Prentah:
- ISET :
Katrangan: Nyetel saiki output.
Example: ISET1: 2.225
Nyetel output output CH 1 dadi 2.225A - ISET ?
Katrangan: Ngasilake setelan saiki output.
Example: ISET1?
Bali setelan CH 1 output saiki - VSET :
Katrangan: Nyetel output outputtage. Example:
VSET1: 20.50
Mranata CH 1 voltage nganti 20.S0V - VSET ?
Katrangan: Ngasilake output outputtage setelan.
Example: VSET1?
Ngasilake CH1 voltage setelan. - IOUT ?
Katrangan: Ngasilake arus output sing nyata.
Example: IOUT1?
Ngasilake arus output CH1 - VOUT ?
Katrangan: Ngasilake output output nyatatage.
Example: VOUT1?
Ngasilake output output CH 1tage - BEEP
Katrangan: Nguripake utawa mateni bip. Boolean: logika boolean.
Example: BEEP1 Nguripake bip. - OUT
Katrangan: Nguripake-mateni output.
Boolean: 0 MATI, 1 ON
Example: OUT1 Nguripake output - STATUS?
Katrangan: Nggawe status POWER SUPPLY.
Isi 8 bit ing format ing ngisor iki
Katrangan Item Bit
0 Nalika output ON, 0 = mode CC, 1 = CVmode
4 Bip 0 = Pateni, 1 = Urip
5 OCP 0 = Pateni, 1 = Urip
6 Output 0 = Pateni, 1 = Urip
7 OVP 0 = Pateni, 1 = Urip - *IDN?
Katrangan: Baliake identifikasi RND 320-KA3005P.
Example *IDN?
Isi RND 320-KA3005P V1 .3 (Produsen, jeneng model,). - RCL
Katrangan: Kelingan setelan panel.
NR 1 1-5: Memori nomer 1 nganti 5
Example RCL 1 Kelingan setelan panel sing disimpen ing nomer memori1 - SAVER
Katrangan: Nyimpen setelan panel.
NR 1 1-5: Memori nomer 1 nganti 5
Example SAV1 Nyimpen setelan panel sing disimpen ing nomer memori1 - OCP <Boolean>
Katrangan: Nyimpen setelan panel.
Boolean: 0 MATI, 1 ON
Example: OCP1 Nguripake OCP - OVP <Boolean>
Katrangan: Nguripake OVP.
Boolean: 0 MATI, 1 ON
Example: OVP1 Nguripake OVP
Dokumen / Sumber Daya
 |
RND Single Channle Remote Control Syntax 20-KA Series [pdf] Pandhuan pangguna RND, Sintaks Kontrol Jarak Jauh Jauh, Seri V3.0, 320-KA |
