RND 320-KA Series single Channel Remote Control Syntax V3.0

Command format: VSET<X>:<NR2>

1. VSET: Command header
2. X: output channel
3. separator
4. NR2: parameter

Command Details:

1. ISET<X>:<NR2>
   Description: Sets the output current.
   Example: ISET1 :2.225
   Sets the CH 1 output current to 2.225A
2. ISET<X>?
   Description: Returns the output current setting.
   Example: ISET1?
   Returns the CH 1 output current setting
3. VSET<X>:<NR2>
   Description: Sets the output voltage. Example:
   VSET1:20.50
   Sets the CH 1 voltage to 20.S0V
4. VSET<X>?
   Description: Returns the output voltage setting.
   Example: VSET1?
   Returns the CH1 voltage setting.
5. IOUT<X>?
   Description: Returns the actual output current.
   Example: IOUT1?
   Returns the CH1 output current
6. VOUT<X>?
   Description: Returns the actual output voltage.
   Example: VOUT1?
   Returns the CH 1 output voltage
7.  BEEP<Boolean>
   Description: Turns on or off the beep. Boolean: boolean logic.
   Example: BEEP1 Turns on the beep.
8. OUT<Boolean>
   Description: Turns on-off the output.
   Boolean: 0 OFF, 1 ON
   Example: OUT1 Turns on the output
9. STATUS?
   Description: Returns the POWER SUPPLY status.
   Contents 8 bits in the following format
   Bit Item Description
   0 When output is ON,0=CC mode, 1 =CVmode
   4 Beep 0=Off, 1 =On
   5 OCP 0=Off, 1 =On
   6 Output 0=Off, 1 =On
   7 OVP 0=Off, 1 =On
10. * IDN?
    Description: Returns the RND 320-KA3005P identification.
    Example *IDN?
    Contents RND 320-KA3005P V1 .3 (Manufacturer, model name,).
11. RCL<NR1>
    Description: Recalls a panel setting.
    NR 1 1-5: Memory numbers 1 to 5
    Example RCL 1 Recalls the panel setting stored in memory number1
12. SAV<NR1>
    Description: Stores the panel setting.
    NR 1 1-5: Memory numbers 1 to 5
    Example SAV1 Stores the panel setting stored in memory number1
13. OCP< Boolean >
    Description: Stores the panel setting.
    Boolean: 0 OFF, 1 ON
    Example: OCP1 Turns on the OCP
14. OVP< Boolean >
    Description: Turns on the OVP.
    Boolean: 0 OFF, 1 ON
    Example: OVP1 Turns on the OVP

Documents / Resources

RND Single Channle Remote Control Syntax 20-KA Series [pdf] User Guide RND, Single Channle Remote Control Syntax, V3.0, 320-KA Series

References

• User Manual