TempU07B Temp lan RH Data Logger
“
Spesifikasi:
- Probe Measuring Range: Humidity 0%~100%RH,
Suhu -40°C nganti 85°C - Akurasi: 0.1%RH typically, 0.1°C
- Resolusi: 0.1
- Kapasitas data: 34560
- Usage Start Mode: Button Start or Timed
Miwiti - Interval Rekaman: User configurable (10
seconds to 99 hours) - Mulai Tundha: User configurable (0~72
jam) - Range Alarm: Pangguna sing bisa dikonfigurasi
- Jenis weker: Tipe Tunggal, Tipe Kumulatif
- Tundha weker: User configurable (10 seconds to
99 jam) - Form of Report: PDF and CSV format data
laporan - Antarmuka: Antarmuka USB2.0
- Tingkat perlindungan: IP65
- Ukuran produk: 100mm x 43mm x 12mm
- Bobot produk: 85g
- Umur baterei: More than 2 years (Normal
suhu 25°C) - PDF and CSV report generation time: Kurang saka
4 menit
Pandhuan panggunaan produk:
1. Miwiti Rekam:
Long press the start button for more than 3 seconds until the
screen displays the WAIT symbol, indicating successful recording
inisiasi.
2. Marking:
To mark during recording, long press the start button for more
than 3 seconds. The screen will switch to the MARK interface,
incrementing the mark number by one.
3. Stop Rekaman:
To stop recording, long press the stop button for more than 3
seconds until the symbol on the screen lights up, indicating
recording has ceased.
Pitakonan sing Sering Ditakoni (FAQ):
Q: How can I change the temperature unit on the device?
A: The temperature unit can be changed in the Factory default
parameters of the device section by selecting either 2 or 8.
Q: What is the default humidity alarm limit for the
piranti?
A: The default humidity alarm limit can be set to either 40%RH
or 80%RH in the Factory default parameters of the device
bagean.
“`
TempU07B Temp&RH Data Logger Manual
1 Pambuka produk
TempU07B minangka logger suhu lan kelembapan layar LCD sing gampang lan portabel. Produk iki utamane digunakake kanggo ngawasi lan ngrekam data suhu lan kelembapan sajrone transportasi lan panyimpenan. Iki digunakake kanthi wiyar ing kabeh aspek gudang lan logistik rantai kadhemen, kayata wadhah kulkas, truk kulkas, kothak distribusi kulkas, lan laboratorium panyimpenan kadhemen. Maca data lan konfigurasi parameter bisa diwujudake liwat antarmuka USB, lan laporan bisa digawe kanthi gampang lan otomatis sawise dipasang, lan ora perlu nginstal driver nalika dipasang ing komputer.
2 Parameter teknis
Proyek
Paramèter
Probe Measuring Range Humidity 0%~100%RH, Temp -40 ~85
Akurasi
±3%(10%~90%), ±5%(other); ±0.3(0~60), ±0.6(other)
Resolution Data Capacity Usage Start Mode Recording Interval Start Delay Alarm Range Alarm Type Alarm Delay Form of Report Interface Protection Level Product Size Product Weight Battery Lifetime PDF and CSV report generation time
0.1%RH typically, 0.1 34560 Multiple times Button Start or Timed Start User configurable (10 seconds to 99 hours) User configurable (0~ 72 hours) User configurable Single type, Cumulative type User configurable (10 seconds to 99 hours) PDF and CSV format data report USB2.0 Interface IP65 100mm*43mm*12mm 85g More than 2 years (Normal temperature 25) Less than 4 minutes
3 Factory default parameters of device
Project Temperature Unit Temperature Alarm Limit Humidity Alarm Limit Alarm Delay Recording Interval Start Delay Device Time LCD Display Time Start Mode
Project 2 or 8 40RH or 80RH 10 minutes 10 minutes 30 minutes UTC time 1 minute Press button to start
4 Instruksi operasi
1Start recording Long press the start button for more than 3s until the screen””or the “WAIT” symbol is on,
indicating that the device has successfully started recording.
2Marking When the device is in the recording state, long press the start button for more than 3s, and the screen will jump to “MARK” interface, mark number plus one, indicating successful marking.
3Stop recording
Long press the stop button for more than 3s until the “” symbol on the screen lights up,
indicating that the device stops recording.
5 LCD display description
1 2 3 lan 7
4 5
Normal × Alarm
6 Daya baterei
In recording status
8 Interface indication
Stop recording status
Area weker:
9 Temperature value
H1 H2 (high temperature&humidity alarm)
Nilai asor
L1 L2 (low temperature&humidity alarm)
Mulai status tundha
10 Unit suhu
Mode Tombol Stop ora valid
11 Unit Kelembapan
1 Short press the start button to switch the display interface in turn Real time temperature interface Real time humidity interface Log interface Mark number interface Temperature maximum interface Temperature minimum interface Humidity maximum interface Humidity minimum interface.
Humidity max interface (record state) Humidity minimum interface (record state)
Antarmuka suhu wektu nyata (status inisialisasi)
Antarmuka kelembaban wektu nyata (status inisialisasi)
Antarmuka log (status rekaman)
Antarmuka nomer tandha (status rekaman)
6 Description of battery status display
Daya Tampilan
Kapasitas 40100 1540
515 5
Antarmuka maks suhu (status rekaman)
Antarmuka minimal suhu (status rekaman)
Notice The battery indication status can not accurately represent the battery power in different low temperature&humidity environment.
Dokumen / Sumber Daya
 |
DAC TempU07B Temp and RH Data Logger [pdf] Instruksi Manual TempU07B, TempU07B Temp and RH Data Logger, TempU07B, Temp and RH Data Logger, RH Data Logger, Data Logger, Logger |