B-TEK HRB Resolusi Tinggi Base Setup
KONFIGURASI
Ing Konfigurasi Sistem: Ganti skala aktif dadi 2.
Ing Konfigurasi Skala: Priksa manawa mode HRB lan setelan skala #2 wis bener.
Konfigurasi Port Serial: Apa nuduhake port serial 1 dipatèni kanggo basa HRB minangka ditampilake ing gambar ngisor iki.
Wiring basis skala HRB.
WARNING: Sambungan ukuran mung port RS232, Aja plug basa menyang port Ethernet amarga iki bisa ngrusak file hub Ethernet.
Cathetan: Basis skala didhukung dening port indikator RS232.
Basis skala HRB kudu disambung karo indikator T405 utawa T419. Iki nggunakake salah sawijining indikator khusus port RS-232 kanggo komunikasi kanthi bener karo pangkalan kasebut. Yen sawetara basis skala HRB dileksanakake, saben kudu nggunakake port RS-232 dhewe.
(B-TEK Part # 825-300032) Kabel indikator RS232 Base to indicator (keyed RJ45 to pigtailed end) 10ft.
(B-TEK Part # 825-300033) Kabel indikator RS232 Base to indicator (keyed RJ45 to pigtailed end) 25ft.
(B-TEK Part # 825-300034) Kabel indikator RS232 Base to indicator (keyed RJ45 to pigtailed end) 50ft.
Kabel kasebut duwe konektor RJ45 sing bener. Gambar ing ngisor iki minangka ujung kabel kanggo sambungan menyang indikator seri HRB lan T.
Tabel nuduhake sambungan kanggo TB3 kanggo Serial Port 1. Yen nggunakake Serial Port 2, banjur nggunakake pin TB3-3 kanggo RX_Base lan pin TB3-5 kanggo TX_BASE.
| Konektor RJ45 | warna | mandhek | fungsi |
| pin 1 | PUTIH/ORANGE | TB3-1 | TANAH |
| pin 8 | BROWN | TB3-1 | TANAH |
| pin 6 | Ijo | TB3-2 | RX - BASE |
| pin 3 | PUTIH/Ijo | TB3-4 | TX- BASE |
| pin 7 | PUTIH / COKLAT | TB3-6 | +-5V |
| pin 5 | PUTIH/BIRU | TB3-6 | +-5V |
Dokumen / Sumber Daya
 |
B-TEK HRB Resolusi Tinggi Base Setup [pdf] Instruksi Manual T405, T419, HRB Resolusi Tinggi Base Setup, HRB, Resolusi Tinggi Base Setup |
