GW70-MQTT 3.0 USB Dongle Plus-E Open Source Wireless Hub
“
Specifiche
- Wireless Communication Frequency: 2.4GHz-2.48GHz
- Supported Protocols: Thread, Zigbee 3.0, Bluetooth 5.2 LE
- PORT config: /dev/ttyUSB0
- Protezione ESD: sì
- Applicable Systems: Home Assistant-ZHA, Home
Assistant-Zigbee2Mqtt, OpenHAB - Communication Distance: 400M (Without obstruction)
- Signal Strength: 18.6 dbm (Instrument testing)
- Antenna Gain: 0 dbi
- Maximum Supported Device Number: 128
Istruzioni per l'uso
- Open the package, connect the antenna to the USB port, and then
insert it into a Computer/Raspberry Pi/HomeAssistant. - Enter the corresponding system configuration (Home
Assistant/OpenHAB) product port (port: /dev/ttyUSB0). - After configuration is completed, the device can be connected
e utilizzato.
Protocolli supportati: Of course, you can also
extend the network range by using it as a router through
re-flashing the firmware.
Scan the QR code to learn about the connection between this
product and HomeAssistant.
Domande frequenti
Q: Can I use this dongle with devices other than Computer,
Raspberry Pi, or HomeAssistant?
A: The dongle is primarily designed for use with Computer,
Raspberry Pi, or HomeAssistant. Compatibility with other devices
può variare.
Q: Can I increase the communication range of this dongle?
A: Yes, you can extend the network range by using it as a router
through re-flashing the firmware.
“`
Chiavetta Zigbee2MQTT
Manuale d'uso
Chiavetta Zigbee2MQTT
Specifiche tecniche
Wireless Communication Frequency Supported Protocols PORT config ESD protection
Sistemi applicabili
Communication Distance Signal strength (dbm)
Antenna gain (dbi)
Maximum supported device number
2.4GHz-2.48GHz
ThreadaZigbee 3.0a Bluetooth 5.2 LE /dev/ttyUSB0 Yes Home Assistant-ZHAa Home Assistant-Zigbee2Mqtta OpenHAB
400M(Without obstruction)
18.6(Instrument testing)
0
128
Istruzioni per l'uso
1.Open the package, connect the antenna to the USB port, and then insert it into a Computer / Raspberry Pi /HomeAssistant Green etc.
Protocolli supportati
*Of course, you can also extend the network range by using it as a router through re-flashing the firmware.
Chiavetta Zigbee2MQTT
2.Enter the corresponding system configuration (Home Assistant/OpenHAB) product port (port: /dev/ttyUSB0). *For detailed configuration procedures, please refer to the guidance documents of the corresponding system.
Chiavetta Zigbee2MQTT
3.After configuration is completed, the device can be connected and used.
Scan the QR code to learn about the connection between this product and HomeAssistant.
GW70-MQTT 25.2.27 144*72 MM36*72 MM 2025.2.27
Documenti / Risorse
 |
zigbee GW70-MQTT 3.0 USB Dongle Plus-E Open Source Wireless Hub [pdf] Manuale d'uso GW70-MQTT 3.0 USB Dongle Plus-E Open Source Wireless Hub, GW70-MQTT, 3.0 USB Dongle Plus-E Open Source Wireless Hub, Plus-E Open Source Wireless Hub, Source Wireless Hub, Wireless Hub |