AVIGILON Unity Video System

Tæknilýsing

• Söluaðili: Avigilon, LenelS2
• Kröfur:
  • ACC Server software 6.12 and later, or ACC Server software 7.0.0.30 and later, or Unity Video 8
  • ACC Client software 6.12 and later, er or ACC Client software 7.0.0.30 and later, or Unity Video 8
  • Leyfi fyrir OnGuard samþættingu við NVR: ACC6-LENL-ONGRD
  • Avigilon samþætting keyranleg file:
    • OnGuardToACCAlarmGateway-8.2.6.14.exe
    • OnGuard version 7.5, 7.6, 8.0, 8.1 and 8.2

Notkunarleiðbeiningar fyrir vöru

Uppsetning

• Upgrading a Previous Version of the Integration: Follow the specific upgrade instructions provided in the documentation.
• Nýjar uppsetningar: Install Unity Video Client software on every workstation that requires access to the integration.
• Check the Avigilon License: After installing all required software, check that the Avigilon license was applied correctly.

Stillingar

• Adding an Integration User in the Unity Video Software: Add a user in the Unity Video Client software specifically for connecting the integration.
• Adding an Integration User in OnGuard: Follow the instructions provided in the Unity Video Client User Guide.
• Adding Unity Video Alarms: Configure alarm settings in the Unity Video system.

Inngangur

The OnGuard to Unity Video Alarm Gateway integration allows events triggered in the OnGuard system to be monitored and recorded through the Unity Video system.

Kröfur

Fyrir frekari upplýsingar

Nánari upplýsingar um verklagsreglurnar sem lýst er í þessari handbók er að finna í eftirfarandi sérstökum hugbúnaðarskjölum:

• Notendahandbók Unity Video Client
• Leiðbeiningar fyrir Unity Video Client Server
• Notendahandbók OnGuard System Administration
• OnGuard OpenAccess notendahandbók

Hvað er nýtt

• Veitt samhæfni við OnGuard 8.2
• Framkvæmdi tæknilegt viðhald á samþættingarhugbúnaðinum
• Optimized synchronization time for resources
• Upgraded cryptography implementation by replacing hard-coded keys with a dynamic solution

Uppsetning

Uppfærsla á fyrri útgáfu samþættingarinnar

• To upgrade an existing version of the integration, run the latest OnGuard to Unity Video Alarm Gateway executable file on the server that is hosting the integration service.
• Allar viðvörunarkortanir frá fyrri útgáfu samþættingarinnar muna og halda áfram að virka eins og búist er við. Hins vegar er nýja útgáfan byggð á OnGuard OpenAccess þjónustunni, þannig að við fyrstu ræsingu eftir uppfærslu verður þú að uppfæra tengingarstillingar áður en samþættingin virkar.
• Fyrir frekari upplýsingar um stillingarvalkosti sem eru tiltækir í þessari útgáfu af samþættingunni, sjá Kortlagning viðvörunar á síðu 7.

Nýjar uppsetningar

• Servers
  • Settu upp OnGuard Integration NVR leyfið (ACC6-LENL-ONGRD) frá Avigilon á einum af netþjónunum á síðunni þinni.
  • Be aware that you must connect directly to this Avigilon server to use the OnGuard to Unity Video Alarm Gateway. The connection between the OnGuard Server machine and the Machine where the integration service is installed should be secured with SSL certificates.
  • Install the OnGuard to Unity Video Alarm Gateway executable (OnGuardtoACCAlarmGateway.exe) on the same server as the OnGuard Server software. It can be installed on the same server as the OnGuard server, but Lenel’s requirement is installation should be on a separate machine.
• Viðskiptavinur
  • Install Unity Video Client software on every workstation that requires access to the integration.

Athugaðu Avigilon leyfið

Athugaðu hvort Avigilon leyfið hafi verið notað á réttan hátt eftir að þú hefur sett upp allan nauðsynlegan hugbúnað.

1. Opnaðu Unity myndbandsforritið.
2. Smelltuog veldu Uppsetning vefsvæðis.
3. Smelltu á Leyfisstjórnun. Leyfisstjórnunarglugginn birtist.

The dialog box must show Integration Support > Yes, or the software was not properly licensed.

Stillingar

Að bæta við samþættingarnotanda í Unity myndbandshugbúnaðinum

• To protect the security of the Unity Video software, add a user in the Unity Video Client software specifically for connecting to the integration. The user you add will be used to connect the Unity Video system to the Avigilon integration software. See the Unity Video Client User Guide for more details.
• The integration user does not need to have any access permissions, just a username and password for connecting the Unity Video to the Gateway integration.
• Athugaðu að samþættingarnotandinn verður að bæta við allar Avigilon viðvaranir sem viðvörunarviðtakanda til að kortleggja viðvaranir fyrir samþættinguna.

Í Unity Video Client hugbúnaðinum skaltu ljúka eftirfarandi skrefum:

1. In the Setup tab, select the Site, then click
2. Í Notendur flipann, smelltu á Bæta við notanda.
3. In the Add/Edit User dialog box, enter a Username:
4. Fylltu út eftirfarandi reiti á svæðinu Lykilorð:
   • Lykilorð: Sláðu inn lykilorð fyrir notandann.
   • Staðfesta lykilorð: Sláðu aftur inn lykilorðið.
   • Password never expires: You may want to select this check box so that you do not need to update the Unity Video password for the integration.
5. Smelltu á OK.
   Kerfið lætur þig vita að nýi notandinn mun ekki hafa neinar heimildir. Smelltu á Já til að halda áfram.

Að bæta við samþættingarnotanda í OnGuard
The OnGuard to Unity Video Alarm Gateway integration uses LenelS2 credentials to access the OnGuard software. In order to use the integration, ensure that you have created a valid OnGuard user account with administrator permissions. This will be your login credentials for the integration.
Fyrir frekari upplýsingar, sjá OnGuard System Administration User Guide.

Adding Unity Video Alarms
Alarms are manually created in the Unity Video Client software. Create the Avigilon alarms you want mapped to events in the OnGuard software, then assign the required cameras and settings for the alarm.

1. In the Unity Video Client software, open the Site Setup tab and click
2. Í viðvörunarglugganum, smelltu á Bæta við.
3. On the Select Alarm Trigger Source page, select External Software Event from the Alarm Trigger Source drop-down list. Click eftir að þú hefur lokið við hverja síðu.
4. On the Select Linked Devices page, select the cameras to link to this alarm, and set the Pre-Alarm Record Time and Recording Duration.
5. On the Select Alarm Recipients page, select the Unity Video software user that was added for the integration. You can also add any other groups or users that need to be notified when this alarm is triggered.
6. (Optional) If you would like to trigger an action when an alarm is acknowledged, select the Activate selected digital output(s) on alarm acknowledgment check box.
   a. Select the digital outputs to be activated and specify the duration.
   b. Select Require user confirmation before activating digital output(s) check box if the user needs to confirm the alarm before the digital output action is initiated.
7. Sláðu inn nafn fyrir vekjarann ​​og stilltu forgang vekjarans. Viðvörunarheitið er notað til að auðkenna viðvörunina meðan á samþættingu stendur.
8. Ensure the Enable alarm check box is selected, then click

Stilling á viðvörunargáttarhlutanum

The Alarm Gateway is composed of two parts: a Windows service that runs automatically in the background, and a Configuration Tool software that is used to setup connection to Avigilon Unity Video Software and OnGuard system and map alarms between the two systems.

Stilling á netþjónsstillingum

Stilltu viðvörunargáttina til að fá aðgang að forritunum tveimur.
Stillingartólið man stillingar miðlarans, svo þú þarft ekki að endurtaka þessa aðferð ef stillingarnar eru þær sömu.

1. Open the configuration application. All Programs or All Apps > Avigilon > OnGuard to Unity Video Alarm Gateway.
2. Í Stillingartólinu, smelltu á Stilla tengingar.
3. Smelltu á Bæta við til að bæta Avigilon þjóninum við.
   • In the following dialog box, enter the Avigilon server IP Address, User Name, and Password, then click OK.
   • Use the username and password created in the Avigilon configuration. See Adding an
   • Integration User in the Unity Video Software on page 4.
   • Ef þjónninn þinn er hluti af vefsvæði, verður viðvörunum frá allri síðunni bætt við samþættinguna.
4. Í OnGuard svæðinu skaltu slá inn eftirfarandi upplýsingar:
   • Í Directory ID reitnum skaltu velja skráaauðkenni sem tengist LenelS2 reikningnum. Sjálfgefið er að auðkenni möppu sé stillt á innri möppu í fyrsta skipti sem þú keyrir forritið.
   • Í Hostname reitnum, sláðu inn Fully Qualified Domain Name (FQDN) tölvunnar sem keyrir OnGuard Server.
   • Enter the LenelS2 Username and Password that were created for the integration. For more information, see Adding an Integration User in OnGuard on page 4.
5. Smelltu á Lokið til að loka glugganum Stilla tengingar.

If OnGuard system has a big size DB it can take some time while all needed resources will be loaded into the Configuration tool.
Once the Alarm Gateway is linked to the Avigilon system, alarms created in the Unity Video are automatically populated in the Configuration Tool.

Kortlagningarviðvörun

In the Configuration Tool is a list of all the current alarm mappings, and all the available alarms from the Unity Video software and the OnGuard software.
If the Configuration Tool is not already open, select All Programs or All Apps > Avigilon > OnGuard to Unity Video Alarm Gateway.

Til að kortleggja viðvaranir saman skaltu ljúka eftirfarandi skrefum:

1. In the Avigilon area, select a Unity Video alarm from the list.
   Ábending: Notaðu leitarstikuna efst á listanum til að finna sérstakar viðvaranir.
2. In the OnGuard area, select the Panel, Device, Control, related Event, and Event Text that will trigger an alarm for the integration.
   For Event Text, specify the LenelS2 alarm event text that you would like to trigger the corresponding Unity Video alarm. If you select All, then any event text will trigger the Unity Video alarm.
   To include all options that are linked to a panel, select the All check box for the Device, Control, or Event Text lists. Otherwise, select any combination of the available options to increase the specificity of the alarm trigger.
3. Smelltu >> til að kortleggja viðvörunina saman.
   To modify an alarm mapping, highlight the alarm mapping in the Alarm Mappings list and click << to unmap the alarm. Make the required changes, then click >> to map the change.s
4. Endurtaktu fyrri skref þar til allar nauðsynlegar viðvaranir hafa verið kortlagðar.
   You can map multiple OnGuard devices and events to one Avigilon alarm, but each OnGuard device and event can only be mapped once.
5. Smelltu á Vista og nota. Samþættingarviðvörunargáttin er uppfærð með öllum nýju eða breyttu kortunum.

Afrit af kortlögðum viðvörunum

Eftir að þú hefur lokið við að kortleggja allar viðvaranir í stillingartólinu geturðu valið að taka öryggisafrit af kortunum.

1. Farðu í C:\Program Files\Avigilon\OnGuard to Unity Video Alarm Gateway\
   Athugið: The file slóð getur verið mismunandi eftir því hvernig kerfið þitt er stillt.
2. Copy and paste the AlarmConfig. XML file á varastað.

Endurheimtir kortlögð viðvörun

When you have a backup copy of the mapped alarms, you can restore the mapped alarms at any time.

1. Locate your backup copy of the AlarmConfig. XML file.
2. Copy and paste the backup AlarmConfig. XML file inn í C:\Program
   Files\Avigilon\OnGuard to Unity Video Alarm Gateway\
3. Opnaðu samþættingarstillingartólið. Endurheimtu kortlagningin ættu að birtast í Viðvörunarkortunum listanum.
4. Click Save and Apply to update the integration alarm gateway service and apply the alarm mapping changes.

Vöktun viðvörunar

Once devices and events from the OnGuard system have been mapped to the Unity Video system, you can begin to use the integration.
To monitor alarms in the Unity Video Client software, the user must have permission to see live video. For other details about monitoring alarms, see the Unity Video Client User Guide.

Úrræðaleit

Hafðu samband við tækniaðstoð Avigilon: avigilon.com/support ef eftirfarandi úrræðaleit leysa ekki vandamálið.

Stillingartól sýnir ekki OnGuard tæki eða viðburði
After you log in to the OnGuard system in the Configuration Tool, the OnGuard devices and events lists remain empty.

Athugaðu eftirfarandi:

• Athugaðu hvort þú hafir skráð þig inn með réttu LenelS2 notendanafni og lykilorði. Gáttin hefur aðgang að OnGuard kerfinu í gegnum innri LenelS2 reikninginn, svo þú verður að skrá þig inn með LenelS2 skilríkjunum þínum.

For more information, see Adding an Integration User in OnGuard on page 4.

Unity Video Alarms Are Not Triggered

When access control events are activated in the OnGuard system, the mapped Unity Video alarm is not triggered.
There may be a connection issue between the Avigilon system and the OnGuard software., Check the following:

• Athugaðu hvort kveikt sé á Avigilon þjóninum.
• Athugaðu hvort Avigilon þjónninn sé á sama neti og OnGuard þjónninn.
• Check that the Avigilon server IP address, username, and password were entered correctly in the Configuration Tool.
• Check that the Avigilon username is listed as an Alarm Recipient in all the alarms needed for the integration. For more information, see Adding Unity Video Alarms on page 4.
• Athugaðu hvort OnGuard LS OpenAccess þjónustan sé í gangi.
• Athugaðu hvort OnGuard LS Linkage Server þjónustan sé í gangi.
• Athugaðu að OnGuard LS Web Event Bridge er í gangi.
• Athugaðu hvort stillingartólið hafi notandanafn og lykilorð slegið inn til að tengjast OnGuard kerfinu.
• Check that the OnGuard LS EventContextProvide service is running.
• Check that mapped events are created with the correct name of the resources (e.g., panel name, reader name, input/output name). For this purpose, we go to the OnGuard Alarm Monitoring, observe all related resources in the triggered event, and replicate it in the Integration configuration tool to the mapped events

Mapped Unity Video Alarms Displayed as Unknown
Mapped alarms in the Configuration Tool are labeled in red as Unknown. The Unity Video Server that the integration is connected to displays an Error status in the Configure Connections dialog box.
This issue occurs if the Unity Video Server has rebooted or is offline.

Framkvæmdu eftirfarandi skref til að tryggja að samþættingin virki rétt:

1. Check that the Unity Video Server is online and connected to the local network.
2. When the Unity Video Server is back online, open the Configuration Tool and click Configure Connections.
3. If the Unity Video Server is online, the server status is Ready. If it is not, check the server connectivity again.
4. Lokaðu Stilla tengingar valmyndinni. Stillingartólið ætti nú að sýna rétt viðvörunarnöfn.
5. Smelltu á Vista og Notaðu til að tryggja að viðvörunarkortin séu virk.

If the mapped alarms are still not displayed, restart the CrossFire Framework service and the CrossFire Server Component Framework service.
If the mapped alarms are still not displayed, restart the OpenAccess service.

Viðburðartexti passar ekki almennilega
If the event text you entered for alarm mapping does not match up with the event text sent from the system,
make sure that there are no line breaks or newline characters, such as the Enter key, in the entered event text. These characters can disrupt the text matching.
To link event text to a Unity Video alarm, see Mapping Alarms on page 7.

Fjaraðgangur á OnGuard þjónustu
Ef OnGuard þjónustan er uppsett á annarri vél og þú lendir í SSL/TLS staðfestingarvandamálum skaltu athuga eftirfarandi leiðbeiningar.
Fylgdu viðauka E: OnGuard og notkun skírteina í OnGuard uppsetningarhandbókinni fyrir frekari upplýsingar um uppsetningu á eigin sérsniðnu vottorðum.

• Athugaðu hvort OnGuard þjónustan sé á netinu.
• Athugaðu hvort þú hafir skipt út SSL/TLS vottorðum fyrir LS Web Server with your certificates. The default certificates location is C:\ProgramData\Lnl\nginx\conf.
• Athugaðu að hýsilnafnið í Configure Connections sé það sama og hýsilnafnið í SSL/TLS vottorðunum.

Í hvert skipti sem þú skiptir um skírteini skaltu endurræsa LS Web Þjónusta og LS Message Broker Service.

Mapped Unity Video Alarms Displayed as Unknown.

© 2013 – 2025, Avigilon Corporation.

All rights reserved. AVIGILON, the AVIGILON logo, UNITY VIDEO, and TRUSTED SECURITY SOLUTIONS are trademarks of Avigilon Corporation. LenelS2 and OnGuard are registered trademarks and VideoViewer vörumerki LenelS2 Systems International, Inc. LenelS2 er hluti af Carrier Global Corporation. Önnur nöfn eða lógó sem nefnd eru hér geta verið vörumerki viðkomandi eigenda. Skortur á táknunum ™ og ® í nálægð við hvert vörumerki í þessu skjali eða yfirleitt er ekki fyrirvari um eignarhald á viðkomandi vörumerki.

This document has been compiled and published using product descriptions and specifications available at the time of publication. The contents of this document and the specifications of the products discussed herein are subject to change without notice. Avigilon Corporation reserves the right to make any such changes without notice. Neither Avigilon Corporation nor any of its affiliated companies guarantees the completeness or accuracy of the information contained in this document, nor is it responsible for your use of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages, including consequential damages) caused by reliance on the information presented herein.

Avigilon Corporation

• avigilon.com
• INT-LENELS2GATEWAY-8.1-A
• Endurskoðun: 8 – EN
• 20250128

Algengar spurningar

• Q: Unity Video Alarms Are Not Triggered?
  A: Check the alarm configurations and ensure they are set up correctly in both systems.
• Q: Configuration Tool Does Not Show OnGuard Devices or Events?
  A: Verify the connection settings and make sure the integration is properly configured.

Skjöl / auðlindir

AVIGILON Unity Video System [pdfNotendahandbók ACC Server software 6.12 and later, ACC Server software 7.0.0.30 and later, Unity Video 8, Unity Video System, Video System, System

Heimildir

• Notendahandbók