ọdịnaya zoo
1 Temptop PMD 371 Mpekere agụba
2 Nkọwapụta
3 FAQ
4 Ngwa ngwa ọkọlọtọ
5 Okwu mmalite
6 MKWUO NKEVIEW
7 Ọrụ bọtịnụ
8 Ọrụ
9 Protocol
10 Nkọwa
11 Nlekọta
12 Nchọpụta nsogbu
13 Nkọwapụta
14 Akwụkwọ ikike & Ọrụ
15 Akwụkwọ / akụrụngwa
15.1 Ntụaka
16 Ozi ndị metụtara

Temptop-LOGO

Temptop PMD 371 Mpekere agụba

Temptop-PMD-371-Mmetụta-Ngwakọta-Ngwaahịa

Nkọwapụta

  • Nnukwu ihuenyo ngosi
  • Bọtịnụ ọrụ asaa
  • Batrị lithium na-arụ ọrụ dị n'ime maka awa 8 nke ịrụ ọrụ na-aga n'ihu
  • 8GB nchekwa nnukwu ikike
  • Na-akwado ụdị nkwukọrịta USB na RS-232

FAQ

Ajụjụ: Ogologo oge ole ka batrị dị n'ime ya na-adịru?

A: Batrị lithium dị elu nke dị n'ime na-enye onye nleba anya ka ọ na-aga n'ihu ruo awa 8.

Ajụjụ: Enwere m ike mbupụ data achọpụtara maka nyocha?

A: Ee, ị nwere ike mbupụ data achọpụtara site na ọdụ ụgbọ mmiri USB maka nyocha ọzọ.

Ajụjụ: Kedu ka m ga-esi hazie efu, k-factor, na eruba?

A: Na interface ntọala sistemụ, gaa na MENU -> Ntọala wee soro ntuziaka maka nhazigharị.

Ozi gbasara akwụkwọ ntuziaka onye ọrụ a

© Copyright 2020 Elitech Technology, Inc. Ikike niile echekwara na United States na obodo ndị ọzọ. Amachibidoro iji, hazie, oyiri, bufee, ịtụgharị, chekwaa dịka akụkụ ma ọ bụ dum nke akwụkwọ ntuziaka onye ọrụ na-enweghị ikike ederede ma ọ bụ ụdị ọ bụla nke Elitech Technology, Inc.

Nkwado ndị teknuzu
Ọ bụrụ na ịchọrọ nkwado, biko nye ndụmọdụ ntuziaka onye ọrụ a iji dozie nsogbu gị. Ọ bụrụ na ị ka na-enwe ihe isi ike ma ọ bụ nwee ajụjụ ndị ọzọ, ị nwere ike ịkpọtụrụ onye na-ahụ maka ọrụ ndị ahịa n'oge awa azụmahịa Mọnde ruo Fraịde, 8:30 ụtụtụ ruo 5:00 mgbede (Pacific Standard Time).

USA:
Tel: (+1) 408-898-2866
Ahịa: sales@temtopus.com

United Kingdom:
Tel: (+44)208-858-1888
Nkwado: service@elitech.uk.com

China:
Tel: (+86) 400-996-0916
Email: sales@temtopus.com.cn

Brazil:
Tel: (+55) 51-3939-8634
Ahịa: brasil@e-elitech.com

Kpachara anya!
Biko gụọ akwụkwọ ntuziaka a nke ọma! Iji njikwa ma ọ bụ mgbanwe ma ọ bụ ọrụ na-abụghị nke akọwapụtara na ntuziaka a, nwere ike bute ihe egwu ma ọ bụ mebie ihe nleba anya.

Ịdọ aka ná ntị!

  • Ihe nleba anya na-egosi ihe nnyefe laser dị n'ime. Emeghela ụlọ nyocha.
  • Onye ọkachamara sitere na onye nrụpụta ga-edobe ihe nleba anya.
  • Ndozi na-akwadoghị ikike nwere ike ibute mkpughe radieshon dị ize ndụ nke onye na-arụ ọrụ na radieshon laser.
  • Elitech Technology, Inc. anaghị anabata ọrụ ọ bụla maka arụrụ arụ ọ bụla kpatara site na ijikwa ngwaahịa a na-ezighi ezi, na arụghị ọrụ dị otú ahụ ga-ewere dị ka ọdịda na-abụghị ọnọdụ nke akwụkwọ ikike na ọrụ edepụtara n'akwụkwọ ntuziaka onye ọrụ a.

Ọ dị mkpa!

  • E boro PMD 371 ebubo ma enwere ike iji ya mee ihe mgbe ebupuchara ya.
  • Ejila ihe nleba anya a chọpụta nnukwu anwụrụ ọkụ, alụlụ mmanu na-etinye uche dị elu, ma ọ bụ gas na-enwe nrụgide ka ịzenarị mmebi n'ọnụ laser ma ọ bụ ngọngọ ikuku.

Mgbe ịmepechara ihe nleba anya, jide n'aka na akụkụ ndị dị na ikpe ahụ zuru oke dịka tebụl na-esonụ. Ọ bụrụ na ihe ọ bụla na-efu, biko kpọtụrụ ụlọ ọrụ anyị.

Ngwa ngwa ọkọlọtọ

Temptop-PMD-371-Perticle-Counter-FIG-1

Okwu mmalite

PMD 371 bụ obere, ọkụ, na batrị na-arụ ọrụ batrị nwere ọwa asaa maka iwepụta ọnụ ọgụgụ 0.3µm, 0.5µm, 0.7µm, 1.0µm, 2.5µm, 5.0µm, 10.0µm ụmụ irighiri ihe, ebe ha na-achọpụta n'otu oge ahụ n'otu oge. irighiri irighiri ihe ise, tinyere PM1, PM2.5, PM4, PM10, na TSP. Na nnukwu ihuenyo ngosi na bọtịnụ asaa maka ịrụ ọrụ, ihe nleba anya dị mfe ma dị irè, dabara maka nchọpụta ngwa ngwa n'ọtụtụ ọnọdụ. Batrị lithium dị elu nke dị n'ime na-enye onye nleba anya ka ọ na-aga n'ihu maka awa 8. PMD 371 nwekwara ebe nchekwa 8GB arụnyere n'ime ma na-akwado ụdị nzikọrịta ozi abụọ: USB na RS-232. Ihe achọpụtara data nwere ike ịbụ viewed ozugbo na ihuenyo ma ọ bụ bupụ ya na ọdụ ụgbọ USB maka nyocha.

MKWUO NKEVIEW

Temptop-PMD-371-Perticle-Counter-FIG-2

  1. 1 Ọwa nnabata
  2. Ngosipụta ihuenyo
  3. Bọtịnụ
  4. Ihe nchekwa PU
  5. Ọdụ ụgbọ mmiri USB
  6. 8.4V ọdụ ụgbọ mmiri
  7. RS-232 Oghere Usoro Oghere Usoro

Ọrụ bọtịnụ

  • Temptop-PMD-371-Perticle-Counter-FIG-3Jide maka sekọnd 2 ka ịgbanwuo/ gbanyụọ ngwa.
  • Temptop-PMD-371-Perticle-Counter-FIGMgbe akụrụngwa agbanyere, pịa ka ịbanye MENU interface; Site na ihuenyo MENU, pịa ka itinye nhọrọ.
  • Temptop-PMD-371-Perticle-Counter-FIG-5Pịa ka ịgbanwee isi ihuenyo. Pịa ka ịgbanwee nhọrọ.
  • Temptop-PMD-371-Perticle-Counter-FIG-6Pịa ka ịlaghachi na ọkwa gara aga.
  • Temptop-PMD-371-Perticle-Counter-FIG-7Pịa ka ịmalite/kwụsị sampegbu oge.
  • Temptop-PMD-371-Perticle-Counter-FIG-8Pịgharịa gaa na nhọrọ na interface menu; Mụbaa uru oke.
  • Temptop-PMD-371-Perticle-Counter-FIG-9Pịgharịa gaa na ala nhọrọ na Menu interface; Wetulata uru oke.

Ọrụ

Ike NA
Pịa ma jide Temptop-PMD-371-Perticle-Counter-FIG-3 maka 2 sekọnd ka ike na ngwá ọrụ ahụ, ọ ga-egosipụtakwa ihuenyo mmalite (Fig 2).

Temptop-PMD-371-Perticle-Counter-FIG-10

Mgbe mmalite, ngwá ọrụ na-abanye na interface nke ọnụ ọgụgụ isi, pịa Temptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee SHIFT gaa na isi ihe ntinye uche dị ukwuu, na ndabara, ọ dịghị ihe ọ bụla ebidola iji chekwaa ike (Fig 3) ma ọ bụ na-ejigide steeti mgbe agbanyụrụ ngwá ọrụ ikpeazụ.

Temptop-PMD-371-Perticle-Counter-FIG-11

Pịa Temptop-PMD-371-Perticle-Counter-FIG-7 igodo ịmalite nchọpụta, interface ozugbo ngosi nke ọnụ ọgụgụ nke irighiri ihe dị iche iche nha ma ọ bụ mkpokọta mkpokọta, pịa. Temptop-PMD-371-Perticle-Counter-FIG-12 igodo iji gbanwee isi view ngosipụta igbe nke ihe nha, ogwe ọkwa dị ala na-egosi sampling agụta. Ngwa ahụ na-adaba na sampling. N'oge sampling usoro, ị nwere ike pịa Temptop-PMD-371-Perticle-Counter-FIG-7 igodo iji kwụsịtụ sampling (Fig. 4).

Temptop-PMD-371-Perticle-Counter-FIG-13

Ntọala NchNhr

Pịa Temptop-PMD-371-Perticle-Counter-FIG ka ịbanye MENU interface, wee pịa Temptop-PMD-371-Perticle-Counter-FIG-12ka ịgbanwee n'etiti nhọrọ.
Pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye nhọrọ gị masịrị view ma ọ bụ gbanwee ntọala (Fig 5).

Temptop-PMD-371-Perticle-Counter-FIG-14Nhọrọ MENU bụ ndị a

Temptop-PMD-371-Perticle-Counter-FIG-43

Ntọala Sistemu
N'ime interface ntọala MENU-Setting, ị nwere ike ịtọ oge, sample, COM, asụsụ, ngbanwe ọkụ azụ na gbanyụọ akpaaka. Pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee nhọrọ (Fig.6) wee pịaTemptop-PMD-371-Perticle-Counter-FIG ịbanye.

Temptop-PMD-371-Perticle-Counter-FIG-15

Nhazi oge
PịaTemptop-PMD-371-Perticle-Counter-FIG igodo iji tinye interface nhazi oge, pịa Temptop-PMD-371-Perticle-Counter-FIG-5igodo iji gbanwee nhọrọ, pịa A Temptop-PMD-371-Perticle-Counter-FIG-12 igodo ka iwelie ma ọ bụ belata uru, gbanwee gaa na nhọrọ Chekwa mgbe emechara ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG igodo iji chekwaa ntọala (Fig 7).

Temptop-PMD-371-Perticle-Counter-FIG-16

Sampna Ntọala
Na interface ntọala ntọala MENU->Ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ịgbanwe gaa na SampNhọrọ Ntọala (Fig 8), wee pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye na sample ntọala interface. N'ime sample ntọala interface ị nwere ike ịtọ sample otu, sample mode, sampoge, jide oge.

Temptop-PMD-371-Perticle-Counter-FIG-17

Sampna Unit
Pịa Temptop-PMD-371-Perticle-Counter-FIG igodo ịbanye na sampling unit ntọala interface, na uka ịta nọ na-dị ka ug / m'3, urughuru counter nwere ike họrọ 4 nkeji: PC / L, TC, CF, m3. Pịa a Temptop-PMD-371-Perticle-Counter-FIG-12  igodo ka ịgbanwee unit ahụ, mgbe emechara ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG-5 igodo ka ịgbanwee gaa na Chekwa, pịa  Temptop-PMD-371-Perticle-Counter-FIGiji chekwaa ntọala (Fig 9).

Temptop-PMD-371-Perticle-Counter-FIG-18

Sampna Ụdị
Pịa Temptop-PMD-371-Perticle-Counter-FIGigodo ịbanye na sampinterface ntọala mode ling, pịaTemptop-PMD-371-Perticle-Counter-FIG-12 igodo ka ịgbanwee gaa na ọnọdụ ntuziaka ma ọ bụ ọnọdụ na-aga n'ihu, pịa Temptop-PMD-371-Perticle-Counter-FIG-5igodo ka ịgbanwee gaa na Chekwa mgbe emechara ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG igodo iji chekwaa ntọala (Fig 10).
Ụdị akwụkwọ ntuziaka: Mgbe sampling oge ruru set sampKa oge na-aga, ọkwa ngwaahịa na-agbanwe ichere wee kwụsị samparụ ọrụ. Ọnọdụ na-aga n'ihu: Arụmọrụ na-aga n'ihu dịka nhazi sampogologo oge na ogologo oge.

Temptop-PMD-371-Perticle-Counter-FIG-19

Sampna Oge

Pịa Temptop-PMD-371-Perticle-Counter-FIG  igodo ịbanye sampinterface nhazi oge ling, sampOgologo oge 1min, 2min, 5min, 10min, 15min, 30min, 60min bụ nhọrọ. PịaTemptop-PMD-371-Perticle-Counter-FIG-12 igodo iji gbanwee sampogologo oge, pịa Temptop-PMD-371-Perticle-Counter-FIG-5 igodo ka ịgbanwee gaa na Chekwa mgbe emechara ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG igodo iji chekwaa ntọala (Fig 11).

Temptop-PMD-371-Perticle-Counter-FIG-20

Jide oge

Pịa Temptop-PMD-371-Perticle-Counter-FIGigodo ịbanye interface ntọala oge njide, na-aga n'ihu sampOtú ọ dị, ị nwere ike họrọ MENU/OK ntọala site na 0-9999s. Pịa Temptop-PMD-371-Perticle-Counter-FIG-12 igodo ka iwelie ma ọ bụ ibelata uru, pịaTemptop-PMD-371-Perticle-Counter-FIG-5 igodo ka ịgbanwee SHIFT gaa Chekwa mgbe emechara ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG iji chekwaa ntọala (Fig 12).

Temptop-PMD-371-Perticle-Counter-FIG-21

Ntọala COM

Na interface ntọala ntọala MENU->Ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee gaa na nhọrọ Ntọala COM, wee pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye na interface Setting COM. Na COM Setting interface MENU/OK ị nwere ike pịa Temptop-PMD-371-Perticle-Counter-FIG-12ịhọrọ ọnụego baud n'etiti nhọrọ atọ: 9600, 19200, na 115200. SHIFT wee pịa ya. Temptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee gaa na Tọọ COM wee pịa Temptop-PMD-371-Perticle-Counter-FIG iji chekwaa ntọala (Fig.13).

Temptop-PMD-371-Perticle-Counter-FIG-22

Ntọala asụsụ

Na interface ntọala ntọala MENU->Ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee gaa na nhọrọ Ntọala asụsụ, wee pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye na interface nhazi asụsụ. N'ime asụsụ MENU/OK Ntọala interface ị nwere ike pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee gaa na Bekee ma ọ bụ Chinese. Wee pịa Temptop-PMD-371-Perticle-Counter-FIG-5ka ịgbanwee SHIFT gaa Chekwa wee pịa Temptop-PMD-371-Perticle-Counter-FIG iji chekwaa ntọala (Fig.14).

Temptop-PMD-371-Perticle-Counter-FIG-23

Ndozi ọkụ azụ

Na interface ntọala ntọala MENU->Ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG-12 igodo ka ịgbanwee gaa na nhọrọ ndozi ọkụ azụ, wee pịa Temptop-PMD-371-Perticle-Counter-FIG igodo ịbanye interface mgbanwe mgbanwe ọkụ azụ. Na ngbanwe ọkụ azụ, ị nwere ike pịa Temptop-PMD-371-Perticle-Counter-FIG-12 igodo iji gbanwee 1, 2, 3 ngụkọta ọkwa 3 nke nchapụta. Wee pịa Temptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee gaa na Chekwa wee pịaTemptop-PMD-371-Perticle-Counter-FIG iji chekwaa ntọala (Fig.15).

Temptop-PMD-371-Perticle-Counter-FIG-24

Na-akpaaka-anya

Na interface ntọala ntọala MENU->Ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG-12 igodo ka ịgbanwee gaa na nhọrọ gbanyụọ akpaaka, wee pịaTemptop-PMD-371-Perticle-Counter-FIG igodo iji tinye interface gbanyụọ akpaaka. Na gbanyụọ akpaaka, ị nwere ike pịa Temptop-PMD-371-Perticle-Counter-FIG-12 igodo ka ịgbanwee Kwado ma gbanyụọ. Wee pịa Temptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee gaa na Chekwa wee pịaTemptop-PMD-371-Perticle-Counter-FIG iji chekwaa ntọala (Fig 16).
Kwado: Ngwaahịa anaghị agbanyụ mgbe ọ na-arụ ọrụ na-aga n'ihu na ọnọdụ nha. Gbanyụọ: Ọ bụrụ na enweghị ọrụ maka ihe karịrị nkeji 10 na ọnọdụ nkwarụ wee chere steeti, ngwaahịa a ga-emechi ozugbo.

Temptop-PMD-371-Perticle-Counter-FIG-25

Nhazi usoro

Pịa Temptop-PMD-371-Perticle-Counter-FIGka ịbanye MENU interface, wee pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee gaa na nhazi usoro. Pịa Temptop-PMD-371-Perticle-Counter-FIGịbanye na interface Calibration System. N'ime interface ntọala MENU-> Calibration, ị nwere ike ịrụ ọrụ Zero Calibration, Flow Calibration na K-Factor Calibration. Pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee nhọrọ wee pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye (Fig.17).

Temptop-PMD-371-Perticle-Counter-FIG-26

efu nhazi nhazi

Tupu ịmalite, biko wụnye nzacha na ikuku ikuku dị ka ihe ncheta ozugbo dị na ngosipụta. Biko hụ 5.2 Zero Calibration maka nkọwa nrụnye ọzọ. Pịa Temptop-PMD-371-Perticle-Counter-FIG ibido nhazi nhazi. Ọ ga-ewe ihe dịka 180 sekọnd ngụkọ. Mgbe ngụkọ gụchara, ihe ngosi ahụ ga-echetara ya iji gosi na nhazigharị ahụ agwụla nke ọma na ọ ga-alaghachi na interface MENU-Calibration na-akpaghị aka (Fig 18).

Temptop-PMD-371-Perticle-Counter-FIG-27

Nhazi nhazi

Tupu ịmalite, biko tinye mita eruba na ntinye ikuku dị ka ozugbo na ngosi. Biko hụ 5.3 Flow Calibration maka ọrụ nrụnye zuru oke. N'okpuru Flow Calibration interface, pịa Temptop-PMD-371-Perticle-Counter-FIG ibido calibrating. Wee pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ịbawanye ma ọ bụ ibelata uru ruo mgbe ọgụgụ mita eruba ruru 2.83 L / min. Mgbe ntọala ahụ mechara, pịa Temptop-PMD-371-Perticle-Counter-FIG iji chekwaa ntọala na ọpụpụ (Fig 19).

Temptop-PMD-371-Perticle-Counter-FIG-28

K-Factor calibration

Pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye na interface calibration nke K-factor maka mkpokọta mkpokọta. Pịa Temptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee cursor, pịa Temptop-PMD-371-Perticle-Counter-FIG-12ka iwelie ma ọ bụ ibelata uru, pịa  Temptop-PMD-371-Perticle-Counter-FIG-5 igodo ka ịgbanwee gaa na Chekwa mgbe emechara ntọala, pịa Temptop-PMD-371-Perticle-Counter-FIG igodo iji chekwaa ntọala . (Fig 20).

Temptop-PMD-371-Perticle-Counter-FIG-29

Akụkọ data

Pịa Temptop-PMD-371-Perticle-Counter-FIGịbanye na interface MENU, wee pịa ma ọ bụ ka ịgbanwee gaa na History Data. Pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye na interface Data History.
Na interface akụkọ ihe mere eme data MENU->Akụkọ, ị nwere ike ịrụ ọrụ ajụjụ data, nbudata akụkọ ihe mere eme na ihichapụ akụkọ ihe mere eme. Pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee nhọrọ wee pịa Temptop-PMD-371-Perticle-Counter-FIGịbanye (Fig.21).

Temptop-PMD-371-Perticle-Counter-FIG-30

Ajụjụ data

N'okpuru ihuenyo ajụjụ, ị nwere ike jụọ ajụjụ data nke urughuru ma ọ bụ mkpokọta mkpokọta n'ọnwa. Pịa Temptop-PMD-371-Perticle-Counter-FIG-12ka ịhọrọ nọmba urughuru ma ọ bụ mkpokọta oke, pịa ka ịgbanwee nhọrọ Tinye, pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye na interface nhọrọ ọnwa, na ndabara, usoro ahụ ga-akwado ọnwa nke ugbu a na-akpaghị aka. Ọ bụrụ na ịchọrọ data maka ọnwa ndị ọzọ, pịa Temptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee gaa na nhọrọ Afọ na ọnwa, wee pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ịbawanye ma ọ bụ ibelata uru. Mgbe emechara, pịa Temptop-PMD-371-Perticle-Counter-FIG-5ka ịgbanwee gaa na ajụjụ wee pịaTemptop-PMD-371-Perticle-Counter-FIG ịbanye (Fig 22).

Temptop-PMD-371-Perticle-Counter-FIG-31

A na-ahazi data egosiri n'oge na-agbadata ebe data kachasị ọhụrụ dị na ibe ikpeazụ.
Pịa Temptop-PMD-371-Perticle-Counter-FIG-12 iji tụgharịa ibe (Fig 23).

Temptop-PMD-371-Perticle-Counter-FIG-32

Budata akụkọ ihe mere eme
N'ime ihe nbudata akụkọ ihe mere eme, tinye ngwaọrụ USB dị ka draịvụ USB ma ọ bụ ihe na-agụ kaadị n'ọdụ ụgbọ mmiri nke ihe nleba anya, Ọ bụrụ na ejikọrọ ngwaọrụ USB nke ọma, pịa. Temptop-PMD-371-Perticle-Counter-FIG iji budata data (Fig 24).

Temptop-PMD-371-Perticle-Counter-FIG-37

Mgbe ebudatara data ahụ, wepụ ngwaọrụ USB ma tinye ya na kọmputa ka ịchọta folda aha ya bụ TEMTOP. Ị nwere ike view ma nyochaa data ugbu a.

Ọ bụrụ na ngwaọrụ USB agaghị ejikọta ma ọ bụ enweghị ngwaọrụ USB ejikọrọ, ngosi ga-akpali ncheta. Biko jikọọ ya ma ọ bụ nwaa ọzọ ma emechaa (Fig 25).

Temptop-PMD-371-Perticle-Counter-FIG-38

Hichapụ akụkọ ihe mere eme

Na interface nhichapụ akụkọ ihe mere eme, enwere ike ihichapụ data site na ọnwa ma ọ bụ ha niile. Pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ka ịgbanwee nhọrọ wee pịa Temptop-PMD-371-Perticle-Counter-FIG ịbanye (Fig 26).

Temptop-PMD-371-Perticle-Counter-FIG-35

Maka interface Data kwa ọnwa, ọnwa dị ugbu a ga-egosipụta onwe na ndabara. Ọ bụrụ na ịchọrọ ihichapụ ọnwa ndị ọzọ, biko pịaTemptop-PMD-371-Perticle-Counter-FIG-5 na-atụgharị gaa na nhọrọ afọ na ọnwa, wee pịa Temptop-PMD-371-Perticle-Counter-FIG-12 ịbawanye ma ọ bụ belata uru. Mgbe emechara, pịaTemptop-PMD-371-Perticle-Counter-FIG-5 ka ịgbanwee gaa na Hichapụ wee pịaTemptop-PMD-371-Perticle-Counter-FIG iji mechaa ihichapụ (Fig 27).

Temptop-PMD-371-Perticle-Counter-FIG-36

Maka Data kwa ọnwa na interface data niile, ihe ngosi ga-akpali ncheta nkwenye, pịa Temptop-PMD-371-Perticle-Counter-FIGiji kwado ya (Fig 28).
Chere ruo mgbe ehichapụrụ ehichapụ, ọ bụrụ na ihichapụ data nke ọma, mgbe ahụ ngosipụta ga-akpali ncheta ma ga-alaghachi na interface MENU-History na-akpaghị aka.

Temptop-PMD-371-Perticle-Counter-FIG-37

Ozi Sistemụ

Ntụgharị Ozi Sistemu na-egosi ozi ndị a (Fig 29)

Temptop-PMD-371-Perticle-Counter-FIG-38

Gbanyụọ ike

Pịa ma jide Temptop-PMD-371-Perticle-Counter-FIG-3 maka sekọnd 2 iji tufuo ihe nleba anya (Fig, 30).

Temptop-PMD-371-Perticle-Counter-FIG-39

Protocol

PMD 371 na-akwado ụdị nkwukọrịta abụọ: RS-232 na USB. A na-eji nzikọrịta ozi serial RS-232 emekọrịta ihe n'ezie. A na-eji nzikọrịta ozi USB bupu akụkọ data.

RS-232 Oghere Usoro Nkwukọrịta

PMD 371 dabere na Modbus RTU protocol.

Nkọwa

Nna-ukwu-ohu:
Naanị nna ukwu nwere ike ịmalite nkwurịta okwu, dịka PMD 371 bụ ohu na ọ gaghị ebute nkwurịta okwu.

njirimara ngwugwu:
Ozi ọ bụla(ngwugwu) na-amalite site n'obere nkeji nke mkpụrụedemede 3.5. Oge ọzọ dị jụụ nke mkpụrụedemede 3.5 na-egosi njedebe ozi. Ogologo oge ịgbachi nkịtị n'etiti mkpụrụedemede dị na ozi ahụ kwesịrị idobe ihe na-erughị mkpụrụedemede 1.5.
Oge abụọ a sitere na njedebe nke Kwụsị-bit nke byte gara aga ruo na mmalite nke Malite-bit nke byte na-esote.

Ogologo ngwugwu:
PMD 371 na-akwado ngwungwu data kachasị (PDU ahịrị serial, gụnyere byte adreesị na 2 bytes CRC) nke 33 bytes.

Ụdị data Modbus:
PMD 371 nwere tebụl data isi anọ (akwụkwọ ndekọ aha) nke enwere ike idegharị:

  • Ntinye pụrụ iche (obere ihe na-agụ naanị)
  • Igwe mmiri (gụọ/dee ntakịrị)
  • Ndebanye aha ntinye (okwu agụ naanị 16-bit, nkọwa dabere na ngwa)
  • Ndebanye aha na-ejide (gụọ/dee okwu 16-bit)
    Mara: Ihe mmetụta ahụ anaghị akwado ịnweta ndekọ nke amamihe dị na ya.

Ndepụta aha

Mmachibido:

  1. A naghị ekwe ka ndebanye aha ntinye na njide kpuchido;
  2. A naghị akwado ihe ndị nwere ike ikwu okwu (ya bụ, coils na ntinye pụrụ iche);
  3. Ngụkọta ọnụ ọgụgụ nke ndebanye aha bụ oke: Oke ndebanye aha ndenye bụ 0x03 ~ 0x10, na akara ndebanye aha bụ 0x04 ~ 0x07, 0x64 ~ 0x69.

Achịkọtara map ndekọ aha (akwụkwọ ndekọ aha niile bụ okwu 16-bit) na tebụl dị n'okpuru

Ntinye ndebanye aha
Mba.  

Pụtara

 Nkọwa
0x00 N/A Echekwara
0x01 N/A Echekwara
0x02 N/A Echekwara
0x03 0.3µm Ndewo 16 Ụmụ irighiri ihe
0x04 0.3µm Lo 16 Ụmụ irighiri ihe
0x05 0.5µm Ndewo 16 Ụmụ irighiri ihe
0x06 0.5µm Lo 16 Ụmụ irighiri ihe
0x07 0.7µm Ndewo 16 Ụmụ irighiri ihe
0x08 0.7µm Lo 16 Ụmụ irighiri ihe
0x09 1.0µm Ndewo 16 Ụmụ irighiri ihe
0x0A 1.0µm Lo 16 Ụmụ irighiri ihe
0X0B 2.5µm Ndewo 16 Ụmụ irighiri ihe
0C 2.5µm Lo 16 Ụmụ irighiri ihe
0x0D 5.0µm Ndewo 16 Ụmụ irighiri ihe
0x0E 5.0µm Lo 16 Ụmụ irighiri ihe
0x0F 10µm Ndewo 16 Ụmụ irighiri ihe
0x10 10µm Lo 16 Ụmụ irighiri ihe
Jide Ndebanye aha
Mba. Pụtara

 

 Nkọwa
0x00 N/A Echekwara
0x01 N/A Echekwara
0x02 N/A Echekwara

Echekwara
0x03 N/A  
0x04 Sampna Unit Ntọala 0x00:TC 0x01:CF 0x02:L 0x03:M3
0x05 Sampna Nhazi oge Sampna Oge
0x06 Malite nchọpụta; Malite nchọpụta 0x00: Kwụsị nchọpụta

0x01: Malite nchọpụta
0x07 Adreesị Modbus 1-247
0x64 Afọ Afọ
0x65 Ọnwa Ọnwa
0x66 Ụbọchị Ụbọchị
0x67 Oge awa Oge awa
0x68 Nkeji Nkeji
0x69 Nke abụọ Nke abụọ

 

Nkọwa koodu ọrụ
PMD 371 na-akwado koodu ọrụ ndị a:

  • 0x03: Gụọ ndekọ ejidere
  • 0x06: Dee otu ndekọ ejidere
  • 0x04: Gụọ ndekọ ntinye
  • 0x10: Dee ndekọ njide ọtụtụ

A naghị akwado koodu ọrụ Modbus fọdụrụ ugbu a.

Ntọala Oghere Usoro
Ọnụego Baud: 9600, 19200, 115200 (lee 3.2.1 Sistemụ Setting-COM Setting)
Iberibe data: 8
Kwụsị bit: 1
Lelee bit: NIA

Ngwa Example

Gụọ data achọpụtara

  • Adreesị ihe mmetụta bụ OxFE ma ọ bụ Adreesị Modbus.
  • Ndị na-esonụ na-eji "OxFE" dị ka example.
  • Jiri 0x04 (gụọ ndekọ ndenye) na Modbus iji nweta data achọpụtara.
  • Data achọpụtara na-etinye n'ime ndekọ na adreesị mmalite nke 0x03, ọnụ ọgụgụ nke ndekọ bụ OxOE, na CRC nlele bụ 0x95C1.

Nna-ukwu na-eziga:

Temptop-PMD-371-Perticle-Counter-FIG-45

Malite nchọpụta

Adreesị ihe mmetụta bụ OxFE.
Jiri 0x06 (dee otu ndekọ ejidere) na Modbus ka ịmalite nchọpụta ahụ.
Dee 0x01 ka ịdebanye aha 0x06 ka ịmalite nchọpụta. Adreesị mmalite bụ 0x06, uru edebanyere aha bụ 0x01. A gbakọrọ CRC ka OxBC04, ezitere ya na obere byte buru ụzọ ziga ya

Temptop-PMD-371-Perticle-Counter-FIG-46

Kwụsị nchọpụta
Adreesị ihe mmetụta bụ OxFE. Jiri 0x06 (dee otu ndekọ ejidere) na Modbus ka ịkwụsị nchọpụta ahụ. Dee 0x01 ka ịdebanye aha 0x06 ka ịmalite nchọpụta. Adreesị mmalite bụ 0x06, uru edebanyere aha bụ 0x00. A gbakọrọ CRC dị ka 0x7DC4, ezitere ya na obere byte dị ala. Nna-ukwu na-eziga:

Temptop-PMD-371-Perticle-Counter-FIG-47

Tọọ Adreesị Modbus
Adreesị ihe mmetụta bụ OxFE. Jiri 0x06(dee otu ndekọ ejidere) na Modbus ka ịtọọ adreesị Modbus. Dee Ox01 ka ịdebanye aha 0x07 iji tọọ adreesị Modbus. Adreesị mmalite bụ 0x07, uru edebanyere aha bụ 0x01. A gbakọrọ CRC ka OXEDC4, ezitere ya na obere byte buru ụzọ ziga ya.

Temptop-PMD-371-Perticle-Counter-FIG-48

Tọọ Oge

  • Adreesị ihe mmetụta bụ OxFE.
  • Jiri 0x10 (dee ọtụtụ ndekọ njide) na Modbus ka ịtọ oge.
  • N'ime ndebanye aha na adreesị mmalite 0x64, ọnụ ọgụgụ nke ndekọ bụ 0x06, na ọnụ ọgụgụ nke bytes bụ OxOC, nke kwekọrọ na afọ, ọnwa, ụbọchị, elekere, nkeji na nke abụọ.
  • Afọ bụ 0x07E4 (ọnụahịa n'ezie bụ 2020),
  • Ọnwa bụ 0x0005 (ezigbo uru bụ Mee),
  • Ụbọchị bụ 0x001D (ezigbo uru bụ 29th),
  • Oge awa bụ 0x000D (ọnụahịa n'ezie bụ 13),
  • Nkeji bụ 0x0018 (ezigbo uru bụ nkeji 24),
  • Nke abụọ bụ 0x0000 (ezigbo uru bụ 0 sekọnd),
  • Nyocha CRC bụ 0xEC93.

Nna-ukwu na-eziga:

Temptop-PMD-371-Perticle-Counter-FIG-49

Nkwukọrịta USB
Biko hụ 3.2.3 Data History - Budata akụkọ maka nkọwa zuru ezu arụmọrụ USB.

Nlekọta

Usoro nlekọta
Iji jiri PMD 371 mee ihe nke ọma, a chọrọ nlekọta mgbe niile na mgbakwunye na arụ ọrụ ziri ezi.
Temptop na-akwado atụmatụ mmezi ndị a:

Temptop-PMD-371-Perticle-Counter-FIG-50

Mmezi nke Zero
Mgbe ejirila ngwá ọrụ ahụ ogologo oge ma ọ bụ gbanwee gburugburu ebe ọrụ, ngwá ọrụ kwesịrị ịdị na-eme ka ọ bụrụ ihe efu. Achọrọ nhazigharị oge niile, yana nzacha dakọtara kwesịrị ka ejiri usoro ndị a mee nhazi (Fig 30):

  1. Mepee ọwa mmiri oriri site na ịtụgharị ya ka ọ na-aga n'ihu elekere.
  2. Tinye nzacha na ntinye ikuku nke ihe nleba anya. Biko mara na ntụzịaka nke akụ na-egosi ntụzịaka nnabata ikuku.

    Temptop-PMD-371-Perticle-Counter-FIG-40

Mgbe emechara nzacha, mepee interface Zero Calibration ma rụtụ aka na 3.2.2 System Calibration- Zero Calibration maka ịrụ ọrụ. Ka emechara nhazigharị ahụ, wepụ ihe nzacha ma kpochie mkpuchi nzacha azụ.

Nhazi nhazi
PMD 371 na-esetịpụ ọnụego ndabara na 2.83 L/min. Ọnụego mgbaba ahụ nwere ike gbanwee nke ọma n'ihi iji ya na-aga n'ihu yana mgbanwe ọnọdụ okpomọkụ, si otú a na-ebelata nhụta ziri ezi.
Temptop na-enye ngwa nrụzigharị eruba maka nnwale na ịhazigharị eruba.

  1. Mepee ọwa mmiri oriri site n'ịtụgharị ya megide elekere.
  2. Fanye mita eruba na ntinye ikuku nke ihe nleba anya. Biko mara na ekwesịrị ijikọ ya na ala nke mita eruba.

    Temptop-PMD-371-Perticle-Counter-FIG-41

Mgbe arụnyere mita eruba, gbanye mgbanaka ngbanwe na nke kachasị, wee mepee Flow Calibration interface ma rụtụ aka na 3.2.2 System Calibration-Flow Calibration maka ịrụ ọrụ. Ka emechara nhazigharị ahụ, wepụ mita eruba, ma kpochie mkpuchi ọwa nnabata ahụ azụ.

 Ndochi ihe nzacha
Mgbe ngwa ahụ na-agba ọsọ ogologo oge ma ọ bụ na-agba ọsọ n'okpuru ọnọdụ mmetọ dị elu ruo ogologo oge, ihe nzacha ahụ ga-aghọ nke ruru unyi, na-emetụta ọrụ nzacha, wee na-emetụta nha nha. Ekwesịrị dochie ihe nzacha mgbe niile.
Temptop na-enye ngwa nzacha ihe enwere ike dochie ya.

Ọrụ nnọchi anya bụ nke a:

  1. Mechie ihe nleba anya.
  2. Jiri screwdriver mkpụrụ ego ma ọ bụ ụdị U-wepụ ihe mkpuchi nzacha n'azụ ngwa ahụ.
  3. Wepu ihe nzacha ochie na tank nzacha.
    Ọ bụrụ na ọ dị mkpa, kpochaa tankị nzacha na ikuku abịakọrọ.
  4. Tinye ihe nzacha ọhụrụ na tankị nzacha ma mechie mkpuchi nzacha.

    Temptop-PMD-371-Perticle-Counter-FIG-42

Nlekọta kwa afọ
A na-atụ aro ka ị weghachi PMD 371 na onye nrụpụta maka mmezi kwa afọ site n'aka ndị ọrụ nlekọta pụrụ iche na mgbakwunye na nhazi kwa izu ma ọ bụ kwa ọnwa site n'aka ndị ọrụ.
Ndozi nlọghachi n'ụlọ ọrụ kwa afọ gụnyekwara ihe mgbochi ndị a iji belata ọdịda mberede:

  • Lelee ma hichaa ihe nchọpụta anya;
  • Lelee nfuli ikuku na ọkpọkọ;
  • Megharịa ma nwalee batrị.

Nchọpụta nsogbu

Temptop-PMD-371-Perticle-Counter-FIG-51

Nkọwapụta

Temptop-PMD-371-Perticle-Counter-FIG-52

Akwụkwọ ikike & Ọrụ

Akwụkwọ ikike: Enwere ike dochie ma ọ bụ rụzie ihe nlebanya ọ bụla nwere ntụpọ n'oge oge ikike. Agbanyeghị, akwụkwọ ikike ahụ anaghị ekpuchi ihe nleba anya nke agbanweela ma ọ bụ gbanwee n'ihi ojiji, nleghara anya, ihe mberede, omume okike, ma ọ bụ nke Elitech Technology, Inc gbanwere.
Ndozi: N'oge akwụkwọ ikike, Elitech Technology, Inc, na-enye ọrụ mmezi n'efu yana ụgwọ mbupu na ego ndị ahịa. Ihe nlebanya a ga-ahazi agaghị emetọ ya site na mmetọ dịka kemịkalụ, ihe ndị dị ndụ, ma ọ bụ ihe redioaktivu. Ọ bụrụ na mmetọ ndị a kpọtụrụ aha n'elu emerụla ihe nleba anya, onye ahịa ga-akwụ ụgwọ nhazi.
Tempop na-akwado ihe etinyere maka afọ 5 site na ụbọchị azụrụ mbụ.

Temptop-PMD-371-Perticle-Counter-FIG-53

Mara: E mere ezi mbọ iji hụ na ozi niile dị n’akwụkwọ ntuziaka a dị ugbu a n’oge e bipụtara ya. Agbanyeghị, ngwaahịa ikpeazụ nwere ike ịdị iche na ntuziaka ahụ, nkọwapụta, njirimara na ngosipụta ga-agbanwe. Biko lelee onye nnọchi anya Temptop gị maka ozi kachasị ọhụrụ.

Teknụzụ Elitech, Inc.
2528 Qume Dr, Ste 2 San Jose, CA 95131 USA
Tel: (+1) 408-898-2866
Ahịa: sales@temtopus.com
Websaịtị: www.temtopus.com

Ụgwọ nke ụlọ ọrụ Elitech (UK) Limited
Nkeji 13 Greenwich Business Park, 53 Norman Road, London, SE10 9QF
Tel: (+44)208-858-1888
Ahịa:sales@elitecheu.com
Websaịtị: www.temtop.co.uk

Ụlọ ọrụ Elitech Brazil Ltd
R.Dona Rosalina,90-Lgara, Canoas-RS 92410-695, Brazil
Tel: (+55)51-3939-8634
Ahịa: brasil@e-elitech.com
Websaịtị: www.elitechbrasil.com.br

Ụgwọ nke ụlọ ọrụ Temptop (Shanghai) Technology Co., Ltd.
Ime ụlọ 555 Pudong Avenue, Pudong New Area, Shanghai, China
Tel: (+86) 400-996-0916
Email: sales@temtopus.com.cn
Websaịtị: www.temtopus.com

V1.0
Emebere na china

Akwụkwọ / akụrụngwa

Temptop PMD 371 Mpekere agụba [pdf] Akwụkwọ ntuziaka onye ọrụ
PMD-371, PMD 371 Mpempe akwụkwọ, PMD 371 Counter, Mpempe akwụkwọ, PMD 371, Counter.

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *