PPI IndeX Linearised Single Point egosi okpomọkụ

Ozi ngwaahịa

Ngosipụta ọnọdụ okpomọkụ nke Linearized Single Point bụ ngwaọrụ na-egosipụta agụmagụ okpomọkụ ma na-enye ọkwa mkpu mgbe ọnọdụ okpomọkụ karịrị ụfọdụ ntọala. Ngwaọrụ nwere ọtụtụ paramita ndị na-arụ ọrụ, gụnyere Oti mkpu-1 na Oti mkpu2 setpoints, PV MIN/MAX parameters Configuration Parameters, na Oti mkpu. O nwekwara okirikiri nhọrọ ukwuu nke na-agụnye ngosipụta uru usoro, ihe ngosi mkpu, na igodo dị iche iche maka ịrụ ọrụ. Ngwaọrụ nwere ike ịnakwere ụdị ntinye dị iche iche, gụnyere RTD Pt100, Ụdị J, Ụdị K, Ụdị R, na Ụdị S.

Ntuziaka ojiji ngwaahịa

Ka ijiri Linearized Single Point Temperature Indicator, soro usoro ndị a:

1. Jikọọ ngwaọrụ dị ka eserese Njikọ Njikọ enyere na ntuziaka onye ọrụ.
2. Gbanwuo AC ọkọnọ nke ngwaọrụ ahụ.
3. Jiri igodo elu na ala ka ịhọrọ ụdị ntinye achọrọ na oke okpomọkụ na PAGE-12.
4. Tọọ ntọala Oti mkpu-1 na Mkpu-2 na PAGE-0.
5. Tọọ ụkpụrụ usoro kachasị na kacha nta na PAGE-1.
6. Tọọ ụdị mkpu na hysteresis na PAGE-11.
7. Pịa ma jide igodo PROGRAM ihe dịka sekọnd ise ka ịbanye ma ọ bụ pụọ na ọnọdụ nhazi.
8. Jiri igodo elu na ala ka ịhazie ụkpụrụ oke dị ka achọrọ.
9. Nyochaa ngosipụta uru usoro yana ihe ngosi mkpu maka ọgụgụ okpomọkụ na ọkwa.

Rịba ama: Maka mmepụta relay, jikọọ LCR na kọntaktị kọntaktị maka igbochi mkpọtụ dị ka egosiri na LCR Connection to Contactor Coil diagram nyere na ntuziaka onye ọrụ.

Ndị na-arụ ọrụ PARAMET

PV MIN/MAX PARAMETERSNhazi Nhazi ntinye

Oti mkpu

N'ihu ogwe osisi LAYOUT

Njikọ eletrik

IHE:- Maka Mpụta Ọpụpụ naanị LCR ka a ga-ejikọ ya na igwe kọntaktị kọntaktị maka igbochi mkpọtụ. (Tụtụ aka eserese njikọ LCR enyere n'okpuru)

Njikọ LCR na COIL

Akwụkwọ / akụrụngwa

PPI IndeX Linearised Single Point egosi okpomọkụ [pdf] Akwụkwọ ntuziaka IndeX, IndeX Linearised Single Point Temperature Indicator, Linearised Single Point Temperature Indicator, Single Point egosi, Okpomọkụ Ngosipụta

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ