NUMERIC Volt Safe Plus Otu akwụkwọ ntuziaka onye ọrụ Servo Stabilizer

ọdịnaya zoo

1 NUMERIC Volt Safe Plus Otu Usoro Servo Stabilizer

2 Nkọwapụta

3 Ntuziaka ojiji ngwaahịa

4 Okwu mmalite

5 Ntuziaka nchekwa dị mkpa

6 Nwụnye

7 FAQ

8 Akwụkwọ / akụrụngwa

8.1 Ntụaka

NUMERIC Volt Safe Plus Otu Usoro Servo Stabilizer

Nkọwapụta

Ike (kVA)	1	2	3	5	7.5	10	15	20
Izugbe
Ọrụ	Akpaaka
Na-ajụ oyi	Ikuku eke / amanye
Nchedo mbata	IP20
Nguzogide mkpuchi	> 5M na 500 VDC dị ka IS9815
Nnwale dielectric	2kV RMS maka 1 nkeji
Ọnọdụ okpomọkụ	0 ruo 45 Celsius C
Ngwa	Eji ime ụlọ / Nrịgo elu ala
Ogo mkpọtụ ụda	<50 dB na anya 1 mita
Agba	RAL 9005
Ụkpụrụ	Ọ dabara na IS 9815
Ntinye IP/OP-Cable	Akụkụ ihu / akụkụ azụ
Mkpọchi ọnụ ụzọ	Akụkụ ihu
Generator ndakọrịta	Dakọtara
Ntinye
Voltage oke	Nkịtị - (170 V ~ 270 V + 1% AC); Ogologo - (140 ~ 280 V + 1% AC)
Oke ugboro	47 ~ 53 ± 0.5% Hz
Ọsọ mgbazi	27 V/sk (Ph-N)
Mpụta
Voltage	230 VAC + 2%
Waveform	Ezi mmeputakwa nke ntinye; enweghị mgbagha nke ebili mmiri nke stabilizer webatara
Ịrụ ọrụ	> 97%
Isi ihe ike	Na-egbochi ibu PF
Nchedo	Ọdịda na-anọpụ iche
	Ebipụrụ ugboro ugboro
	Onye njide ịwa ahụ
	Ntinye: Obere-Elu & Mmepụta: Obere-Elu
	Ibufe ibu (njem eletrọnịkị) / sekit dị mkpụmkpụ (MCB/MCCB)
	Ọdịda ahịhịa carbon
Anụ ahụ
Akụkụ (WxDxH) mm (±5mm)	238x320x300			285x585x325	395x540x735	460x605x855
Arọ (kgs)	13-16			36-60	70-80	60-100	100-110	130-150
Ngosipụta dijitalụ LED	TRUE RMS nha
	Ntinye voltage
	Mmepụta voltage
	Ugboro mmepụta
	Ibu ibu ugbu a
Ihe ngosi panel ihu	Mais ON, Mpụta ON, Ngosipụta njem: Ntinye dị ala, Ntinye dị elu, mpụta dị ala, mpụta dị elu, bufee

Ntuziaka ojiji ngwaahịa

Okwu mmalite

Atụmatụ: VOLTSAFE PLUS bụ servo stabilizer nke nwere ikike sitere na 1 ruo 20 kVA. Ọ na-arụ ọrụ na-akpaghị aka ma na-enye voltage mgbazi.

Ụkpụrụ nke ọrụ: The stabilizer na-ahụ na a kwụsiri ike mmepụta voltage site na nleba anya na-aga n'ihu na ịhazigharị ntinye voltagna mgbanwe.
Ihe osise eserese: Eserese ngọngọ na-egosi njikọ ntinye na mmepụta nke servo stabilizer.

Ntuziaka nchekwa dị mkpa
Akpachara anya nchekwa izugbe: Iji gbochie ihe egwu, zere ịtinye stabilizer n'ebe nwere ihe na-ere ọkụ ma ọ bụ n'akụkụ igwe nwere mmanụ ụgbọala.

Nwụnye

Usoro ntinye: Soro koodu eletriki mpaghara na ụkpụrụ n'oge ntinye. Jikọọ eriri eletrik na oghere mmepụta ahapụtara ma ọ bụ ngọngọ njedebe.
Ebe nchekwa AC: Gbaa mbọ hụ na ntọ ala kwesịrị ekwesị site na ijikọ waya ụwa na njedebe chassis ụwa.

Nkọwapụta
Edepụtara nkọwa zuru ezu nke VOLTSAFE PLUS servo stabilizer n'elu.

MMADỤ

Ekele, anyị nwere obi ụtọ ịnabata gị na ezinụlọ ndị ahịa anyị. Daalụ maka ịhọrọ Numeric dị ka onye mmekọ ngwọta ike ntụkwasị obi gị; ị nwere ohere ugbu a na netwọk kacha obosara nke ụlọ ọrụ 250+ na mba ahụ.
Kemgbe 1984, Numeric na-enyere ndị ahịa ya aka ịkwalite azụmahịa ha site na iji ngwọta ike kachasị elu nke na-ekwe nkwa enweghị nkebi na ike dị ọcha yana akara ukwu gburugburu na-achịkwa.

Anyị na-atụ anya nkwado gị na-aga n'ihu n'afọ ndị na-abịa!
Akwụkwọ ntuziaka a na-enye ozi izugbe gbasara nrụnye na ịrụ ọrụ nke VOLTSAFE PLUS.

Nkwuputa

Ọdịnaya nke akwụkwọ ntuziaka a ga-agbanwerịrị n'ebughị ụzọ mara.

Anyị ejirila nlezianya dị mma iji nye gị akwụkwọ ntuziaka na-enweghị njehie. Ọnụọgụ na-agbagha ụgwọ maka ezighi ezi ma ọ bụ ihe ọ bụla nwere ike ime. Ọ bụrụ na ịchọta ozi na akwụkwọ ntuziaka a na-ezighi ezi, na-eduhie eduhie, ma ọ bụ nke ezughi oke, anyị ga-enwe ekele maka okwu na aro gị.
Tupu ịmalite ntinye nke servo voltage stabilizer, biko gụọ akwụkwọ ntuziaka a nke ọma. Akwụkwọ ikike nke ngwaahịa a bụ ihe efu ma ọ bụrụ na emejọ/jiri ngwaahịa ahụ emejọ.

Okwu mmalite

Ọnụọgụ VOLTSAFE PLUS bụ vol na-achịkwa servotage stabilizer nwere teknụzụ sitere na microprocessor dị elu iji kwado ahịrị sistemụ ike AC. Nke a stabilizer bụ ngwa eletrọnịkị nke na-enye mmepụta voltage sitere na ntinye AC na-agbanwe agbanwe voltage na ọnọdụ ibu dị iche iche. VOLTSAFE PLUS na-emepụta mmepụta volts mgbe niiletage nwere ±2% izi ezi nke voltage.

Atụmatụ

Ngosipụta dijitalụ akụkụ asaa
Teknụzụ dabere na MCU dị elu

Ịrụ ọrụ dị elu na ntụkwasị obi
Generator dakọtara

Teknụzụ SMPS arụrụ arụ
Enweghị mgbagha ụdị ifegharị

Mbipu oke ibu
Ọnwụ ike na-erughị 4%

okirikiri ọrụ na-aga n'ihu
Na-enye ịdọ aka ná ntị buzzer a na-anụ maka ọnọdụ adịghị mma / njem
Ihe ngosi LED a na-ahụ anya maka ihe ngosi njem & mains ON
Ogologo ndụ
MTBF dị elu nwere mmezi dị ala

Ụkpụrụ nke ọrụ

VOLTSAFE PLUS na-eji usoro nzaghachi mechiri emechi iji nyochaa ntinye na mmepụta voltages na iji dozie ntinye dị iche iche voltage. Ihe mmepụta mgbe niile voltagA na-enweta e site na iji mgbanwe autotransformer (variac) na moto synchronous AC na sekit eletrọnịkị.
Sekit eletrọnịkị nke dabere na microcontroller na-achọpụta voltage, nke dị ugbu a na ugboro ole ma jiri ntụaka atụnyere ya. Ọ bụrụ n'iche ọ bụla na ntinye, ọ na-ewepụta akara na-eme ka moto nwee ike ịgbanwe voltage wee mezie mmepụta voltage n'ime kwuru ndidi. Nke kwụsiri ike voltage na-eweta naanị maka ibu AC.

Ihe osise ngọngọ
Voltsafe PLUS - Usoro nke 1 - Usoro nke 1: eserese mgbochi Servo Stabilizer.

N'ihu panel arụmọrụ & LED egosi

Ngosipụta nhọrọ mita dijitalụ
I/PV	Gosipụta ihe nhọpụta nhọrọ mita maka volt ntinye
O/PV	Ngosipụta akara nhọrọ mita maka volt mmepụta
FREQ	Ngosipụta nhọpụta nhọrọ mita maka ugboro mmepụta
O/PA	Gosipụta ihe nhọpụta nke mita maka mmepụta ibu ugbu a

Ngbanwe menu
Ntinye volt	Mpụta volt	Ibu mmepụta ugbu a	Ugboro mmepụta

Ime na Emeghị - Ọrụ

Dos
- Maka ndị otu servo stabilizers niile, a na-atụ aro ka ijikọ na-anọpụ iche na naanị otu akụkụ ọ bụla.
- Gbaa mbọ hụ na ọ nweghị njikọ rụrụ arụ.

Emeghị
- Agaghị gbanwee ahịrị ntinye na ahịrị mmepụta n'otu njikọ otu akụkụ.
- Na saịtị ahụ, ejikọtala usoro na nkeji n'akụkụ ntinye nke servo, n'ọnọdụ ọ bụla. Naanị nnọpụiche na usoro ka a ga-ejikọta.

Ntuziaka nchekwa dị mkpa

Nchekwa nchekwa izugbe

Ewepụla ihe nkwụsi ike na mmiri ozuzo, snoo, spray, bilige ma ọ bụ uzuzu.
Iji belata ihe ize ndụ nke ihe egwu, ekpuchila ma ọ bụ gbochie oghere ikuku.

Awụnyela stabilizer n'ime oghere efu nke nwere ike ibute oke ọkụ.
Iji zere ihe ize ndụ nke ọkụ na ọkụ eletrik, jide n'aka na wiwi dị ugbu a dị n'ọnọdụ dị mma na waya adịghị oke.
Ejila wiwi mebiri emebi rụọ ọrụ stabilizer.

Ngwa a nwere ihe eletrọnịkị nke nwere ike imepụta arcs ma ọ bụ ọkụ. Iji gbochie ọkụ ma ọ bụ mgbawa, etinyela ya na ngalaba nwere batrị ma ọ bụ ihe ọkụ ọkụ ma ọ bụ n'ebe chọrọ mgbanye ngwaọrụ echedoro. Nke a na-agụnye oghere ọ bụla nwere ígwè ọrụ mmanụ ụgbọala, tankị mmanụ ọkụ ma ọ bụ nkwonkwo, ihe nrụnye, ma ọ bụ njikọ ndị ọzọ n'etiti akụkụ nke usoro mmanụ ụgbọala.

Ịdọ aka ná ntị nchekwa dị mkpa

Dị ka egwu voltages dị na servo-achịkwa voltagNa stabilizer, ọ bụ naanị ọnụọgụ teknụzụ ka enyere ikike imeghe ya. Ọdịda ịhụ nke a nwere ike bute ihe egwu nke ujo ọkụ eletrik na imebi akwụkwọ ikike ọ bụla.

Dị ka servo stabilizer nwetara akụkụ na-akpụ akpụ dị ka ogwe aka variac na moto, biko debe ya na gburugburu ebe enweghị uzuzu.

Nwụnye

Usoro ntinye

Wepu ngwa ahụ nke ọma na-enweghị mmebi ebe ọ bụ na nkwakọ ngwaahịa nwere katọn yana ihe mkpuchi ụfụfụ, dabere na ikpe ahụ. A na-atụ aro ka ịkwaga akụrụngwa juru n'ọnụ ruo ebe nrụnye wee bupụ ya ma emechaa.

A ghaghị itinye unit ahụ n'ebe dị anya site na mgbidi ahụ na ikuku ventilashị kwesịrị ekwesị maka ịrụ ọrụ na-aga n'ihu. Ekwesịrị itinye unit ahụ n'ebe a na-enweghị uzuzu na ebe a na-enweghị ebili mmiri ọkụ.
Ọ bụrụ na servo unit nwere eriri ntinye ike 3-pin, jikọọ ya na plọg 3-pin [E, N & P] India ma ọ bụ oghere 16A India na mgba ọkụ 1-pole main breaker, dị ka koodu eletriki mpaghara na. ụkpụrụ.
N'ụdị ndị ọzọ, ebe servo nwere njikọ ma ọ bụ bọọdụ ọnụ, jikọọ ntinye na mmepụta akara n'otu n'otu site na bọọdụ ọnụ.
Mara: Agbanwela otu ntinye ntinye - L & N.

Gbanwee MCB isi
Rịba ama: Ntinye & Mpụta MCB bụ ngwa nhọrọ dị ka onye ahịa chọrọ maka servo stabilizers na-ekpo ọkụ n'otu oge.
Tupu ijikọ ibu ahụ, lelee mmepụta voltage n'ime mita ihe ngosi enyere n'ihu panel.
Ọ kwesịrị ịdị n'ime ihe a chọrọ voltage nke ± 2%. Nyochaa nsonaazụ voltage gosipụtara na mita dijitalụ n'ihu panel. Gbaa mbọ hụ na servo stabilizer na-arụ ọrụ nke ọma.

Gbanyụọ Isi MCB tupu ijikọ ibu.
Jikọọ mmepụta otu nkeji n'otu njedebe nke eriri eletrik ewepụtara site na ibu ahụ, dabere na koodu eletrik na ụkpụrụ mpaghara. Jikọọ nsọtụ ọzọ nke eriri eletrik na ntinye Indian UNI socket ma ọ bụ ngọngọ ọnụ nke akara 'OUTPUT'.

AC nchekwa grounding
Ekwesịrị ijikọ waya ụwa na njedebe ebe ntụpọ chassis nke otu.

Ịdọ aka ná ntị! Hụ na njikọ AC niile siri ike (torque nke 9-10ft-lbs 11.7–13 Nm). Njikọ ndị na-adịghị mma nwere ike ịkpata ikpo oke ọkụ yana ihe egwu nwere ike ime.

BYPASS Gbanwee – Nhọrọ
Rịba ama: Nkọwapụta ngwaahịa nwere ike ịgbanwe naanị na ikike ụlọ ọrụ na-enweghị ọkwa ọ bụla.

Nyochaa ka ịchọta alaka anyị kacha nso

Isi ụlọ ọrụ: 10th Floor, Prestige Center Court, Office Block, Vijaya Forum Mall, 183, NSK Salai, Vadapalani, Chennai - 600 026.

Kpọtụrụ ụlọ ọrụ ndị ahịa 24 × 7 anyị:

Email: ahịa.care@numericups.com
Ekwentị: 0484-3103266 / 4723266
www.numericups.com

FAQ

Ajụjụ: Enwere ike iji VOLTSAFE PLUS servo stabilizer n'èzí?
A: Mba, e mere stabilizer maka naanị ime ụlọ.

Ajụjụ: Gịnị bụ ike ihe nke stabilizer?
A: The stabilizer nwere ike ihe karịrị 97%.

Ajụjụ: Kedu ka m ga-esi mara ma enwere ibu ibu?
A: The stabilizer nwere oke ibu nchedo na eletrọnịkị ọrụ njem.

Akwụkwọ / akụrụngwa

NUMERIC Volt Safe Plus Otu Usoro Servo Stabilizer [pdf] Akwụkwọ ntuziaka onye ọrụ
Volt Safe Plus Otu nkeji Servo Stabilizer, Otu nkeji Servo Stabilizer, Usoro Servo Stabilizer, Servo Stabilizer

Ntụaka

Akwụkwọ ntuziaka onye ọrụ