NUMERIC Volt Safe Plus Single Phase Servo Stabilizer

Nā kikoʻī

Kaha (kVA)	1	2	3	5	7.5	10	15	20
KAHIKI
Hana	'akomi
Hoʻoluʻu	ʻEa kūlohelohe / ikaika
Palekana komo	IP 20
ʻO ke kūʻokoʻa	> 5M ma 500 VDC e like me ka IS9815
Hoʻāʻo dielectric	2kV RMS no 1 minuke
Ka wela ambient	0 a 45 °C
Palapala noi	Hoʻohana i loko / kau ʻana o ka papahele
Pae walaʻau Acoustic	<50 dB ma 1 mika mamao
kalakala	RAL 9005
Nā kūlana	Kūlike me ka IS 9815
IP/OP-Uea komo	ʻaoʻao mua / ʻaoʻao hope
Laka puka	ʻaoʻao mua
Generator compatability	Kūlike
INPUT
Voltage laulā	Maʻamau – (170 V~270 V + 1% AC); Laulā – (140~280 V + 1% AC)
Laulā pinepine	47 ~ 53 ± 0.5% Hz
Ka wikiwiki hoʻoponopono	27 V/sec (Ph-N)
PUKA
Voltage	230 VAC + 2%
Ka nalu	Hoʻopuka maoli o ka hoʻokomo; ʻaʻohe distortion waveform i hoʻokomo ʻia e ka stabilizer
Ka pono	> 97%
Mea mana	Immune e hoouka PF
Palekana	ʻAʻole kū ʻole
	ʻoki ʻia ka pinepine
	Hoʻopaʻa haʻalulu
	Hoʻokomo: Haʻahaʻa-Kiʻekiʻe & Hoʻopuka: Haʻahaʻa-Kiʻekiʻe
	ʻOi aku ka ukana (huakaʻi uila) / kaapuni pōkole (MCB/MCCB)
	ʻAʻole palaki kalapona
KINO
Nā Ana (WxDxH) mm (±5mm)	238x320x300			285x585x325	395x540x735	460x605x855
Kaumaha (kgs)	13-16			36-60	70 – 80	60-100	100-110	130-150
Hōʻike kikohoʻe LED	Ana RMS TRUE
	Hoʻokomo voltage
	Hana voltage
	Ka pinepine puka
	Hoʻouka i kēia manawa
Nā hōʻailona o ka papa mua	Mains ON, Output ON, Nā hōʻailona huakaʻi: Haʻahaʻa hoʻokomo, Kiʻekiʻe hoʻokomo, haʻahaʻa i waho, Kiʻekiʻe ka hoʻopuka, ʻoi aku ka ukana.

Nā ʻōlelo hoʻohana huahana

Hoʻolauna

1. Nā hiʻohiʻona: The VOLTSAFE PLUS is a single-phase servo stabilizer with capacities ranging from 1 to 20 kVA. It operates automatically and provides efficient voltage hooponopono.
2. Kumu o ka hana: The stabilizer ensures a stable output voltage by continuously monitoring and adjusting the input voltage nā hoʻololi ʻana.
3. Kākoʻo Puhi: The block diagram illustrates the input and output connections of the servo stabilizer.

Nā ʻōlelo aʻoaʻo palekana koʻikoʻi
Hoʻomalu palekana nui: To prevent hazards, avoid installing the stabilizer in areas with flammable materials or near gasoline-powered machinery.

Hoʻokomo

• Kaʻina hana hoʻokomo: Follow local electrical codes and standards during installation. Connect the electrical cable to the designated output socket or terminal block.
• ʻO ke kahua palekana AC: Ensure proper grounding by connecting the earth wire to the chassis earth point terminal.

Nā kikoʻī
The detailed specifications of the VOLTSAFE PLUS servo stabilizer are outlined above.

OLELO HOOLAHA

• Hoʻomaikaʻi, hauʻoli mākou e hoʻokipa iā ʻoe i kā mākou ʻohana o nā mea kūʻai aku. Mahalo iā ʻoe no ke koho ʻana iā Numeric ma ke ʻano he hoa hoʻonā mana hilinaʻi; i kēia manawa ua loaʻa iā ʻoe i kā mākou pūnaewele ākea o 250+ mau kikowaena lawelawe ma ka ʻāina.
• Mai ka makahiki 1984, ua ʻae ʻo Numeric i kāna mau mea kūʻai aku e hoʻomaikaʻi i kā lākou ʻoihana me nā hopena mana kiʻekiʻe e hoʻohiki ai i ka mana maʻemaʻe a me ka maʻemaʻe me nā wāwae wāwae kaiapuni.
• Ke kali nei mākou i kāu kākoʻo mau i nā makahiki e hiki mai ana!
• Hāʻawi kēia manual i ka ʻike maʻamau e pili ana i ka hoʻokomo ʻana a me ka hana ʻana o VOLTSAFE PLUS.

Hoʻolele

• Hiki ke loli nā mea o kēia manual me ka ʻole o ka hoʻolaha mua ʻana.
• Ua hana mākou i ka mālama kūpono e hāʻawi iā ʻoe i kahi manual hala ʻole. Hoʻokuʻu ʻo Numeric i ke kuleana no nā hemahema a i ʻole nā ​​mea i hana ʻia. Inā ʻike ʻoe i ka ʻike i loko o kēia manual i hewa, alakaʻi hewa ʻole, a i ʻole piha ʻole, mahalo mākou i kāu mau manaʻo a me nā manaʻo.
• Ma mua o kou hoʻomaka ʻana e hoʻokomo i ka servo voltage stabilizer, e ʻoluʻolu e heluhelu pono i kēia manual. He mea ʻole ka palapala hōʻoia o kēia huahana, inā hoʻohana ʻino ʻia ka huahana.

Hoʻolauna

ʻO ka helu VOLTSAFE PLUS kahi vol i hoʻomalu ʻia e ka servotage stabilizer me ka ʻenehana microprocessor-based e hoʻopaʻa i ka laina o ka ʻōnaehana mana AC. ʻO kēia stabilizer kahi mea uila e hāʻawi i ka vol output mautage mai ka fluctuating hookomo AC voltage a me nā kūlana ukana like ʻole. Hoʻopuka ʻo VOLTSAFE PLUS i kahi voli puka mautage me ± 2% pololei o ka vol settage.

Nā hiʻohiʻona

• Hōʻike kikohoʻe ʻehiku ʻāpana
• ʻenehana hoʻokumu MCU kiʻekiʻe
• ʻO ka hana kiʻekiʻe a me ka hilinaʻi
• Mea hoʻomohala kūpono
• ʻenehana SMPS i kūkulu ʻia
• ʻAʻohe ʻano hawewe
• ʻoki ʻana i ka ukana nui
• ʻO ka poho mana ma lalo o 4%
• Ka pōʻai hana mau
• Hāʻawi i ka ʻōlelo aʻo audible buzzer no nā kūlana hewa / huakaʻi
• Hōʻike LED ʻike no nā hōʻailona huakaʻi & mains ON
• Hoʻonui ola
• MTBF kiʻekiʻe me ka mālama haʻahaʻa

Kumu o ka hana

• Hoʻohana ʻo VOLTSAFE PLUS i kahi ʻōnaehana pane pani pani e nānā i ka voli komo a me ka pukatages a hoʻoponopono i ka voltage. Ka puka mau voltage is achieved by using a variable autotransformer (variac) with an AC synchronous motor and an electronic circuit.
• The microcontroller-based electronic circuit senses the voltage, current and frequency and compares it with a reference. In case of any deviation in input, it generates a signal that energizes the motor to vary the voltage a hoʻoponopono i ka puka puka voltage i loko o ka ʻōlelo hoʻomanawanui. ʻO ka vol i hoʻopaʻa ʻiatagHāʻawi ʻia ka e no nā ukana AC wale nō.

kiʻi poloka
VOLTSAFE PLUS – Servo 1 Phase – 1 Phase: Servo Stabilizer block diagram.

Nā hana o ka panel mua & hōʻike LED

Hōʻike koho mika kikohoʻe
I/P V	E hōʻike i ka hōʻailona koho mika no nā volts hoʻokomo
O/P V	Hōʻike i ka hōʻailona koho ʻana no nā volts puka
FREQ	Hōʻike i ka hōʻailona koho mika no ka alapine puka
O/P A	Hōʻike i ka hōʻailona koho mika no ka hoʻouka ʻana i kēia manawa

Menu switch
Volt hookomo	Output volts	Haawe puka kēia manawa	Ka pinepine puka

Nā hana a me nā hana ʻole – Nā hana

• ʻO Dos
  
  • No nā mea hoʻokūpaʻa servo hoʻokahi, pono e hoʻopili wale i ka neutral a me kahi pae hoʻokahi wale nō.
  • E hōʻoia ʻaʻole pili ʻole.
• ʻAʻole
  • ʻAʻole pono e hoʻololi ʻia ka laina hoʻokomo a me ka laina hoʻopuka i ka pilina hoʻokahi.
  • Ma ka pūnaewele, mai hoʻohui i ka pae i ka ʻāpana ma ka ʻaoʻao hoʻokomo o ka servo, ma lalo o kekahi kūlana. ʻO ke kūʻokoʻa i ka pae wale nō e hoʻopili ʻia.

Nā kuhikuhi palekana koʻikoʻi

Hoʻomalu palekana maʻamau

• Mai hōʻike i ka stabilizer i ka ua, ka hau, ka ehu, ka bilge a me ka lepo.
• No ka ho'ēmiʻana i ka pilikia o ka pōʻino, mai uhi a keʻakeʻa i nā puka makani.
• Mai hoʻokomo i ka stabilizer i loko o kahi keʻena hoʻomaʻemaʻe ʻole i hiki ke hopena i ka wela.
• No ka pale ʻana i ka pilikia o ke ahi a me ka haʻalulu uila, e hōʻoia i ka maikaʻi o ka uwea e kū nei a ʻaʻole i emi ka nui o ka uea.
• Mai hoohana i ka stabilizer me ka uwea poino.
• Aia i loko o kēia mea lako nā mea uila e hiki ai ke hana i nā arcs a i ʻole nā ​​huna huna. No ka pale ʻana i ke ahi a i ʻole ka pahū ʻana, mai hoʻokomo iā ia i loko o nā keʻena i loaʻa nā pā a i ʻole nā ​​​​mea hiki ke puhi ʻia a i ʻole ma nā wahi e pono ai nā mea hana pale ʻia. Loaʻa kēia i nā wahi e loaʻa ana nā mīkini i hoʻohana ʻia i ka ʻaila, nā pahu wahie a i ʻole nā ​​hono, nā mea pono, a i ʻole nā ​​pilina ʻē aʻe ma waena o nā ʻāpana o ka ʻōnaehana wahie.

PALAPALA PALAPALA NUI

• E like me ka pōʻino voltagaia i loko o ka vol i hoʻomalu ʻia e ka servotage stabilizer, ua ʻae ʻia nā ʻenehana helu wale nō e wehe. ʻO ka mālama ʻole ʻana i kēia hiki ke hopena i ka pilikia o ka haʻalulu uila a me ka hōʻole ʻia o kekahi palapala hōʻoia.
• No ka loaʻa ʻana o ka servo stabilizer i nā ʻāpana neʻe e like me ka lima variac a me ke kaʻa, e ʻoluʻolu e mālama iā ia i loko o kahi wahi lepo ʻole.

Hoʻokomo

Kaʻina hana hoʻokomo

• Wehe akahele i ka ʻāpana me ka ʻole o ka pōʻino mai ka mea i loaʻa i ka pahu o nā mea hana he pahu pahu me kahi pā i hoʻopaʻa ʻia i ka huʻa, ma muli o ka hihia. Manaʻo ʻia e hoʻoneʻe i nā lako i hoʻopaʻa ʻia a hiki i kahi i hoʻokomo ʻia a wehe ʻia ma hope.
• Pono e waiho ʻia ka ʻāpana ma kahi mamao kūpono mai ka pā a pono e hōʻoia i ka ea kūpono no ka hana mau. Pono e hoʻokomo ʻia ka ʻāpana i loko o kahi lepo lepo ʻole a ma kahi i hana ʻole ʻia nā hawewe wela.
• Inā loaʻa i ka ʻāpana servo kahi uwea hoʻokomo mana 3-pin, e hoʻopili iā ia i kahi plug 3-pin [E, N & P] Indian a i ʻole kahi kumu 16A India i ka hoʻololi hoʻololi nui 1-pole, e like me nā code uila kūloko a nā kūlana.
• Ma nā hiʻohiʻona ʻē aʻe, kahi i loaʻa i ka servo kahi mea hoʻohui a i ʻole ka papa terminal, e hoʻopili i ka hoʻokomo a me ka hoʻopuka i kaha ʻia mai ka papa terminal.
  Nānā: Mai hoʻololi i ka hoʻokomo hoʻokahi māhele - L & N.
• Huli ON MCB nui
  Nānā: Input & Output MCB is an optional accessory as per the customer’s requirement for air-cooled single-phase servo stabilizers.
• Ma mua o ka hoʻohui ʻana i ka ukana, e nānā i ka voltage i ka mika hōʻike i hāʻawi ʻia ma ka ʻaoʻao mua.
• Pono ia i loko o ka vol i makemake ʻiatage o ± 2%. E hōʻoia i ka puka puka voltage hōʻike ʻia ma ka mika kikohoʻe ma ka ʻaoʻao mua. E hōʻoia i ka hana pono ʻana o ka servo stabilizer.
• E hoʻopau i ka MCB nui ma mua o ka hoʻohui ʻana i ka ukana.
• Hoʻohui i ka puka puka hoʻokahi i kekahi hopena o ke kaula uila i helu ʻia mai ka ukana, e like me nā code uila a me nā kūlana. E hoʻohui i ka ʻaoʻao ʻē aʻe o ke kaula uila i ke kumu puka Indian UNI a i ʻole ka pahu pahu i kaha ʻia ʻo 'OUTPUT'.

Kūleʻa palekana AC
Pono e hoʻopili ʻia ka uea honua me ka pahu chassis earth point o ka ʻāpana.

OLELO HOOLAHA! Make sure all the AC connections are tight (torque of 9-10ft-lbs 11.7–13 Nm). Loose connections could result in overheating and a potential hazard.

Hoʻololi BYPASS – Koho
Nānā: Hiki ke hoʻololi ʻia nā kikoʻī o ka huahana ma muli o ka manaʻo o ka hui me ka ʻole o ka hoʻolaha mua ʻana.

E LOAA KO MAKOU LALA KOKE

Head Office: 10th Floor, Prestige Center Court, Office Block, Vijaya Forum Mall, 183, N.S.K Salai, Vadapalani, Chennai – 600 026.

E kelepona i kā mākou 24 × 7 Customer Excellence Center:

• leka uila: customer.care@numericups.com
• Kelepona: 0484-3103266 / 4723266
• www.numericups.com

FAQ

Q: Can the VOLTSAFE PLUS servo stabilizer be used outdoors?
A: No, the stabilizer is designed for indoor use only.

Q: What is the power factor of the stabilizer?
A: The stabilizer has a power factor greater than 97%.

Q: How do I know if there is an overload?
A: The stabilizer has overload protection with electronic trip functionality.

Palapala / Punawai

NUMERIC Volt Safe Plus Single Phase Servo Stabilizer [pdf] Palapala Hoʻohana Volt Safe Plus Single Phase Servo Stabilizer, Single Phase Servo Stabilizer, Phase Servo Stabilizer, Servo Stabilizer

Nā kuhikuhi

• Palapala Hoʻohana