ARDUINO ABX00027 Nano 33 IoT Development Board
Atụmatụ
SAMD21G18A
- Nhazi
- 256KB Flash
- 32KB Flash
- Ntọgharị ike-na (POR) na nchọpụta Brown Out (BOD)
- Akụkụ
- 12 ọwa DMA
- Usoro mmemme ọwa 12
- 5x 16-bit ngụ oge/Counter
- 3x 24-bit ngụ oge/counter nwere ọrụ ogologo
- 32-bit RTC
- Oge nche nche
- CRC-32 generator
- USB onye ọbịa/ngwaọrụ zuru oke nwere isi njedebe 8
- 6x SERCOM (USART, I2C, SPI, LIN)
- Ọwa abụọ I2S
- 12 bit 350ksps ADC (ruo 16 bit nwere ihe karịrịampling)
- 10 bit 350ksps DAC
- Njikwa nkwụsị nke mpụga (ruo ahịrị 16)
Nina W102
- Modul
- Dual Core Tensilica LX6 CPU ruo 240MHz
- 448 KB ROM, 520KB SRAM, Flash 2MB
- WiFi
- IEEE 802.11b ruo 11Mbit
- IEEE 802.11g ruo 54MBit
- IEEE 802.11n ruo 72MBit
- 2.4 GHz, 13 ọwa
- 16dBm mmepụta ike
- 19 dBm EIRP
- -96 dBm mmetụta
- Bluetooth BR/EDR
- Oke 7 kacha
- 2.4 GHz, 79 ọwa
- Ruo 3 Mbit/s
- 8 dBm ike mmepụta na 2/3 Mbit/s
- 11 dBm EIRP na 2/3 Mbit/s
- 88dBm mmetụta
- Ike Bluetooth dị ala
- Bluetooth 4.2 dual-mode
- 2.4GHz 40 ọwa
- 6 dBm ike mmepụta
- 9 dBm EIRP
- 88dBm mmetụta
- Ruo 1Mbit/
- MPM3610 (DC-DC)
- Na-ahazi ntinye voltage si ruo 21V nwere opekempe nke 65% arụmọrụ @ ibu kacha nta
- Karịrị 85% arụmọrụ @12V
- ATECC608A (Crypto Chip)
- Onye na-arụkọ ọrụ cryptographic nwere nchekwa igodo dabere na ngwaike echekwara
- Nchekwa echedoro maka igodo iri na isii, asambodo ma ọ bụ data
- ECDH: FIPS SP800-56A Elliptic Curve Diffie-Hellman
- NIST ọkọlọtọ P256 elliptical curve nkwado
- SHA-256 & HMAC hash gụnyere ichekwa ma ọ bụ weghachi ọnọdụ ndị na-apụ apụ
- AES-128 encrypt/decrypt, ubi Galois mụbaa maka GCM
- LSM6DSL (6 axis IMU)
- Accelerometer 3D na-adị mgbe niile na gyroscope 3D
- Smart FIFO ruru 4 KByte dabere
- ± 2 / ± 4 / ± 8 / ± 16 g zuru oke
- ±125/±250/±500/±1000/±2000 DPS zuru oke
The Board
Dịka bọọdụ ụdị Nano niile, Nano 33 IoT enweghị chaja batrị mana enwere ike ịkwado ya site na USB ma ọ bụ nkụnye eji isi mee.
IHE: Arduino Nano 33 IoT na-akwado naanị 3.3VI/Os na ọ bụghị 5V na-anabata ya, biko hụ na ị naghị ejikọta akara 5V ozugbo na bọọdụ a ma ọ bụ na ọ ga-emebi. Ọzọkwa, n'adịghị ka bọọdụ Arduino Nano na-akwado ọrụ 5V, pin 5V anaghị enye vol.tage mana ejikọrọ ya, site na jumper, na ntinye ike USB.
1.1 Ngwa Examples
ọdụ ihu igwe: Iji Arduino Nano 33 IoT yana ihe mmetụta na ihe ngosi OLED, anyị nwere ike ịmepụta obere ọdụ ihu igwe na-agwa ọnọdụ okpomọkụ, iru mmiri wdg ozugbo na ekwentị gị.
Nyochaa ogo ikuku: Ogo ikuku na-adịghị mma nwere ike inwe nnukwu mmetụta na ahụike gị. Site n'ịchịkọta Nano 33 IoT, yana ihe mmetụta na nyocha ị nwere ike ijide n'aka na edobere ogo ikuku na gburugburu ime ụlọ. Site na ijikọ mgbakọ ngwaike na ngwa IoT/API, ị ga-enweta uru oge.
drum ikuku: Ọrụ ngwa ngwa na nke na-atọ ụtọ bụ ịmepụta obere ikuku ikuku. Jikọọ Nano 33 IoT gị wee bulite eserese gị site na Mepụta Web Editọ wee malite ịmepụta iti na ebe ọrụ ọdịyo gị nke nhọrọ gị.
Ogo
Ọnọdụ ọrụ akwadoro
| Akara | Nkọwa | Min | Oke |
| Oke thermal Conservative maka bọọdụ dum: | -40 Celsius (40 Celsius) | 85°C (185°F) |
Oriri ike
| Akara | Nkọwa | Min | Ụdị | Oke | Nkeji |
| VINMax | Oke ntinye voltage sitere na VIN pad | -0.3 | – | 21 | V |
| VUSBMax | Oke ntinye voltage site na njikọ USB | -0.3 | – | 21 | V |
| PMax | Oriri ike kacha | – | – | TBC | mW |
Arụ ọrụ gafereview
Board Topology
| Ref. | Nkọwa | Ref. | Nkọwa |
| U1 | Onye njikwa ATSAMD21G18A | U3 | LSM6DSOXTR IMU sensọ |
| U2 | NINA-W102-00B WiFi/BLE Module | U4 | ATECC608A-MAHDA-T Chip Crypto |
| J1 | Njikọ USB Micro | PB1 | IT-1185-160G-GTR bọtịnụ Push |
| Ref. | Nkọwa | Ref. | Nkọwa |
| SJ1 | Mepee akwa solder (VUSB) | SJ4 | Akwa akwa akwa mechiri emechi (+3V3) |
| TP | Ihe nlele | xx | Lorem Ipsum |
Nhazi
Main Processor bụ Cortex M0+ na-agba ọsọ ruo 48MHz. Ọtụtụ n'ime ntụtụ ya jikọtara ya na isi nkụnye eji isi mee, Otú ọ dị, ụfọdụ echekwabara maka nkwurịta okwu n'ime ya na modul ikuku na n'ime ime ime I2C (IMU na Crypto).
IHE: N'adịghị ka bọọdụ Arduino Nano ndị ọzọ, atụdo A4 na A5 nwere ndọpụta dị n'ime yana ndabara nke a ga-eji dị ka ụgbọ ala I2C nke ejiri ya dị ka ntinye analog adịghị atụ aro. Mmekọrịta ya na NINA W102 na-eme site na ọdụ ụgbọ mmiri na ụgbọ ala SPI site na ntụtụ ndị a.
| SAMD21 Pin | SAMD21 Mkpọchi | NINA Pin | Acronym NINA | Nkọwa |
| 13 | PA08 | 19 | RESET_N | Tọgharia |
| 39 | PA27 | 27 | GPIO0 | Arịrịọ nlebara anya |
| 41 | PA28 | 7 | GPIO33 | Nkwenye |
| 23 | PA14 | 28 | GPIO5 | SPI CS |
| 21 | GPIO19 | UART RTS | ||
| 24 | PA15 | 29 | GPIO18 | SPI CLK |
| 20 | GPIO22 | UWA CTS | ||
| 22 | PA13 | 1 | GPIO21 | SPI MISO |
| 21 | PA12 | 36 | GPIO12 | SPI MOSI |
| 31 | PA22 | 23 | GPIO3 | Ihe nhazi TX Nina RX |
| 32 | PA23 | 22 | GPIO1 | Ihe nhazi RX Nina TX |
Module Nkwukọrịta WiFi/BT
Nina W102 gbadoro ụkwụ na ESP32 ma na-ebunye ya site na nchịkọta sọftụwia enyerelarị ikike sitere na Arduino. Koodu isi mmalite maka firmware dị [9].
IHE: Ịmegharịa ngwa ngwa nke modul ikuku na omenala nke ga-emebi irube isi n'ụkpụrụ redio dị ka Arduino kwadoro, ya mere a naghị atụ aro nke a ma ọ bụrụ na ejiri ngwa a na ụlọ nyocha nkeonwe tere aka na ngwa eletrọnịkị ndị ọzọ na ndị mmadụ. Iji ngwa ngwa omenala na modul redio bụ naanị ọrụ dịịrị onye ọrụ. Ejikọrọ ụfọdụ ntụtụ modul ahụ na nkụnye eji isi mee ndị dị n'èzí ma ESP32 nwere ike ịkwọ ya ozugbo ma ọ bụrụhaala na atụnyere SAMD21 dabara adaba nke ọma. N'okpuru bụ ndepụta nke mgbaàmà ndị dị otú ahụ:
| SAMD21 Pin | SAMD21 Mkpọchi | NINA Pin | Acronym NINA | Nkọwa |
| 48 | PB03 | 8 | GPIO21 | A7 |
| 14 | PA09 | 5 | GPIO32 | A6 |
| 8 | PB09 | 31 | GPIO14 | A5/SCL |
| 7 | PB08 | 35 | GPIO13 | A4/SDA |
3.4 Crypto
Ihe mgbawa crypto dị na bọọdụ Arduino IoT bụ ihe na-eme ka ọdịiche dị na bọọdụ ndị ọzọ na-enweghị nchebe n'ihi na ọ na-enye ụzọ echedoro iji chekwaa ihe nzuzo (dị ka asambodo) ma na-eme ka usoro nchekwa dị ngwa ngwa n'agbanyeghị na ọ naghị ekpughe ihe nzuzo na ederede doro anya. Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado Crypto dị [10]
3.5 IMU
Arduino Nano 33 IoT nwere 6 axis IMU agbakwunyere nke enwere ike iji tụọ nghazi bọọdụ (site na ịlele ike ndọda acceleration vector orientation) ma ọ bụ tụọ ujo, ịma jijiji, osooso na ntụgharị ọsọ. Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado IMU dị [11]
3.6 Osisi Ike
Ọrụ Board
Mmalite – IDE
Ọ bụrụ na ịchọrọ ịme mmemme Arduino 33 IoT gị mgbe ị na-anọghị, ịkwesịrị ịwụnye IDE Desktop Arduino [1] Iji jikọọ Arduino 33 IoT na kọmputa gị, ị ga-achọ eriri USB Micro-B. Nke a na-enyekwa ike na osisi ahụ, dị ka LED gosipụtara.
Mmalite – Arduino Web Onye nchịkọta akụkọ
Bọdụ Arduino niile, gụnyere nke a, na-arụ ọrụ nke ọma na Arduino Web Editor [2], site na ịwụnye ngwa mgbakwunye dị mfe.
Arduino Web A na-akwado onye nchịkọta akụkọ n'ịntanetị, ya mere ọ ga-adị ọhụrụ mgbe niile site na njirimara na nkwado maka bọọdụ niile. Soro [3] ka ịmalite itinye koodu na ihe nchọgharị wee bulite ihe osise gị na bọọdụ gị.
Mmalite – Arduino IoT Cloud
A na-akwado ngwaahịa Arduino IoT niile na Arduino IoT Cloud nke na-enye gị ohere ịbanye, eserese na nyochaa data sensọ, kpalite ihe omume, wee rụzie ụlọ ma ọ bụ azụmahịa gị.
Sampna Sketches
SampEnwere ike ịhụ ihe osise maka Arduino 33 IoT ma na “Examples” menu na Arduino IDE ma ọ bụ na ngalaba “Akwụkwọ” nke Arduino Pro websaịtị [4]
Ngwa ntanetị
Ugbu a na ị gafere isi ihe ị nwere ike ime na bọọdụ ị nwere ike ịchọpụta ohere na-adịghị agwụ agwụ ọ na-enye site na ịlele ọrụ ndị na-akpali akpali na ProjectHub [5], Arduino Library Reference [6] na ụlọ ahịa dị n'ịntanetị [7] ebe ị nọ. ga-enwe ike imeju bọọdụ gị na sensọ, actuators na ndị ọzọ.
Iweghachite Board
Bọdụ Arduino niile nwere ihe nrụnye bootloader nke na-enye ohere iji eriri USB na-ebunye bọọdụ ahụ. Ọ bụrụ na eserese kpuchiri ihe nrụpụta na bọọdụ ahụ enweghị ike iru ọzọ site na USB, ọ ga-ekwe omume ịbanye ọnọdụ bootloader site na ịpị bọtịnụ nrụpụta ugboro abụọ ozugbo ọ gbasịrị.
Pinot njikọ
USB
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 1 | VUSB | Ike | Ntinye ntinye ike. Ọ bụrụ na ejiri VUSB kwadoro bọọdụ site na nkụnye eji isi mee nke a bụ ihe nrụpụta
(1) |
| 2 | D- | dị iche iche | USB data dị iche iche - |
| 3 | D+ | dị iche iche | USB data dị iche iche + |
| 4 | ID | Analọg | Na-ahọpụta ọrụ onye ọbịa/ngwaọrụ |
| 5 | GND | Ike | Ala Ike |
Ụlọ ahụ nwere ike ịkwado ọnọdụ nnabata USB naanị ma ọ bụrụ na ejiri VUSB pin ma ọ bụrụ na jumper dị nso na pin VUSB dị mkpụmkpụ.
nkụnye eji isi mee
Bọdụ ahụ na-ekpughe njikọ njikọ pin 15 abụọ nke enwere ike ijikọ nkụnye ntụtụ ma ọ bụ were ya na-ere ya site na vias castellated.
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 1 | D13 | Dijitalụ | GPIO |
| 2 | + 3V3 | Nwepu Ike | Mbupute ike dị n'ime na ngwaọrụ mpụga |
| 3 | AREF | Analọg | Ntuziaka Analog; enwere ike iji ya dị ka GPIO |
| 4 | A0/DAC0 | Analọg | ADC na/DAC pụọ; enwere ike iji ya dị ka GPIO |
| 5 | A1 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 6 | A2 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 7 | A3 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 8 | A4/SDA | Analọg | ADC n'ime; I2C SDA; Enwere ike iji ya dị ka GPIO (1) |
| 9 | A5/SCL | Analọg | ADC n'ime; I2C SCL; Enwere ike iji ya dị ka GPIO (1) |
| 10 | A6 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 11 | A7 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 12 | VUSB | Ịbata/Ọpụpụ | Na-emekarị NC; enwere ike ijikọ na pin VUSB nke njikọ USB site na mbelata jumper |
| 13 | RST | Digital In | Ntinye nrụpụta dị ala na-arụ ọrụ (ụdị nke pin18) |
| 14 | GND | Ike | Ala Ike |
| 15 | VIN | Ike In | Ntinye ike Vin |
| 16 | TX | Dijitalụ | USART TX; enwere ike iji ya dị ka GPIO |
| 17 | RX | Dijitalụ | USART RX; enwere ike iji ya dị ka GPIO |
| 18 | RST | Dijitalụ | Ntinye nrụpụta dị ala na-arụ ọrụ (ụdị nke pin13) |
| 19 | GND | Ike | Ala Ike |
| 20 | D2 | Dijitalụ | GPIO |
| 21 | D3/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 22 | D4 | Dijitalụ | GPIO |
| 23 | D5/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 24 | D6/PWM | Dijitalụ | GPIO, enwere ike iji dị ka PWM |
| 25 | D7 | Dijitalụ | GPIO |
| 26 | D8 | Dijitalụ | GPIO |
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 27 | D9/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 28 | D10/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 29 | D11/MOSI | Dijitalụ | SPI MOSI; enwere ike iji ya dị ka GPIO |
| 30 | D12/MISO | Dijitalụ | SPI MISO; enwere ike iji ya dị ka GPIO |
Mebie
N'akụkụ ala nke osisi ahụ, n'okpuru modul nkwurịta okwu, a na-ahazi akara ngosi debug dị ka 3 × 2 test pads na 100 mil pitch. A na-egosi pin 1 na eserese 3 - Ọnọdụ njikọ
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 1 | + 3V3 | Nwepu Ike | Mpụta ike emepụtara n'ime ga-eji dị ka voltage ntụaka |
| 2 | SWD | Dijitalụ | SAMD11 Otu data nbipu waya |
| 3 | SWCLK | Digital In | SAMD11 Otu elekere nbibi waya |
| 4 | UPDI | Dijitalụ | ATMEga4809 update interface |
| 5 | GND | Ike | Ala Ike |
| 6 | RST | Digital In | Ntinye nrụpụta dị ala na-arụ ọrụ |
Ozi igwe
Ngosipụta osisi na oghere nrịgo
Ngwakọta bọọdụ ahụ na-agwakọta n'etiti metric na imperial. A na-eji ihe ndị eze ukwu na-edobe grid 100 mil n'etiti ahịrị pin ka ha kwekọọ na bọọdụ achịcha ebe ogologo bọọdụ bụ Metric. 
Ọnọdụ njikọ
Nke view n'okpuru si n'elu agbanyeghị ọ na-egosi mpe mpe mpe akwa njikọ Debug nke dị n'akụkụ ala. Ntụtụ ndị pụtara ìhè bụ pin 1 maka njikọ ọ bụla'
N'elu view: 
N'okpuru view:
Asambodo
Nkwupụta nke Nkwekọrịta CE DoC (EU)
Anyị na-ekwupụta n'okpuru ọrụ anyị naanị na ngwaahịa ndị dị n'elu kwekọrọ na ihe ndị dị mkpa nke ntuziaka EU na-esote ya mere tozuru oke maka mmegharị n'efu n'ime ahịa nke nwere European Union (EU) na European Economic Area (EEA).
Nkwupụta nke Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
bọọdụ Arduino kwekọrọ na RoHS 2 Directive 2011/65/EU nke European nzuko omeiwu na RoHS 3 Directive 2015/863/EU nke Council of 4 June 2015 na mmachi nke ojiji nke ụfọdụ ize ndụ ihe na ngwa eletriki na eletrọnịkị.
| Ihe | Oke kacha (ppm) |
| Ndu (Pb) | 1000 |
| Ogwugwu (Cd) | 100 |
| Ebere (Hg) | 1000 |
| Chromium Hexavalent (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Mwepu: Ọnweghị mpụ a na-ekwu.
Boards Arduino na-akwado nke ọma na ihe ndị metụtara European Union Regulation (EC) 1907/2006 gbasara ndebanye aha, nyocha, ikike na mmachi nke kemịkalụ (REACH). Anyị na-ekwupụta enweghị nke SVHC (https://echa.europa.eu/)web/ guest/candidate-list-table), Ndekọ Candidate nke ihe dị oke mkpa maka ikike nke ECHA wepụtara ugbu a, dị na ngwaahịa niile (yana ngwugwu) n'ọnụọgụ mkpokọta na ntinye nha ma ọ bụ karịa 0.1%. Dị ka ihe ọmụma anyị si mara, anyị na-ekwupụtakwa na ngwaahịa anyị enweghị ihe ọ bụla e depụtara na "Ndepụta ikike" (Annex XIV nke ụkpụrụ REACH) na ihe gbasara nchegbu dị oke elu (SVHC) n'ụdị ọ bụla dị mkpa dị ka akọwapụtara. site na Mgbakwunye XVII nke ndepụta Candidate bipụtara EHA (European Chemical Agency) 1907/2006/EC.
Nkwupụta mineral esemokwu
Dị ka onye na-eweta ihe elektrọnik na eletriki eletrik zuru ụwa ọnụ, Arduino maara ọrụ anyị na-ahụ maka iwu na ụkpụrụ gbasara Mineral Conflict, kpọmkwem Dodd-Frank Wall Street Reform and Consumer Protection Act, Nkebi 1502. Arduino anaghị ebute ma ọ bụ hazie esemokwu ozugbo. mineral dị ka Tin, Tantalum, Tungsten, ma ọ bụ ọla edo. Ngwakọta mineral ndị na-ese okwu dị n'ime ngwaahịa anyị n'ụdị ihe na-ere ahịa, ma ọ bụ dị ka akụrụngwa na alloys ọla. Dịka akụkụ nke mbọ anyị kwesịrị ekwesị Arduino akpọtụrụla ndị na-ebubata akụrụngwa n'ime ụdọ ọkọnọ anyị iji chọpụta na ha nọgidere na-agbaso ụkpụrụ ahụ. Dabere na ozi enwetara ugbu a, anyị na-ekwupụta na ngwaahịa anyị nwere Mineral Conflict sitere na mpaghara enweghị nsogbu.
FCC ịkpachara anya
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
Nkwupụta Mkpughe Radiation FCC RF:
- Agaghị ejikọta ihe nnyefe a ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ.
- Ngwa a na-akwado oke mkpughe radieshon RF ewepụtara maka gburugburu enweghị njikwa.
- Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na opekempe 20cm n'etiti radiator & ahụ gị.
Bekee: Akwụkwọ ntuziaka onye ọrụ maka ngwa redio enweghị ikike ga-enwe ọkwa ndị a ma ọ bụ nha nhata na ọnọdụ pụtara ìhè n'ime akwụkwọ ntuziaka onye ọrụ ma ọ bụ ọzọ na ngwaọrụ ma ọ bụ ha abụọ. Ngwaọrụ a na-akwado ụkpụrụ (s) RSS enweghị ikike ụlọ ọrụ Canada. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ọrụ ngwaọrụ ahụ achọghị.
IC SAR Waring:
Ekwesịrị ịwụnye akụrụngwa a ma jiri obere opekempe 20 cm n'etiti radiator na ahụ gị.
Ihe dị mkpa: Ọnọdụ okpomọkụ nke EUT enweghị ike ịgafe 85 ℃ ma ghara ịdị ala karịa -40 ℃. Site na nke a, Arduino Srl na-ekwupụta na ngwaahịa a kwekọrọ na ihe ndị dị mkpa chọrọ yana ndokwa ndị ọzọ dị mkpa nke Ntuziaka 2014/53/EU. Ekwenyere ka ejiri ngwaahịa a na mba ndị otu EU niile.
| Ugboro ugboro | Ike mmepụta kacha (ERP) |
| 863-870Mhz | -3.22dBm |
Ozi ụlọ ọrụ
| Aha Ụlọ Ọrụ | Arduino SA. |
| Adreesị ụlọ ọrụ | Site na Ferruccio Pelli 14 6900 Lugano Switzerland |
Akwụkwọ ntụaka
| Ntụaka | Njikọ |
| Arduino IDE (Desktọpụ) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (igwe ojii) | https://create.arduino.cc/editor |
| Cloud IDE na-amalite | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino- web-editor-4b3e4a |
| Nzukọ | http://forum.arduino.cc/ |
| SAMD21G18 | http://ww1.microchip.com/downloads/en/devicedoc/40001884a.pdf |
| NINA W102 | https://www.u-blox.com/sites/default/files/NINA-W10_DataSheet_%28UBX- 17065507%29.pdf |
| ECC608 | http://ww1.microchip.com/downloads/en/DeviceDoc/40001977A.pdf |
| MPM3610 | https://www.monolithicpower.com/pub/media/document/MPM3610_r1.01.pdf |
| NINA Firmware | https://github.com/arduino/nina-fw |
| Ụlọ akwụkwọ ECC608 | https://github.com/arduino-libraries/ArduinoECCX08 |
| Ụlọ akwụkwọ LSM6DSL | https://github.com/stm32duino/LSM6DSL |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Ntụaka ụlọ akwụkwọ | https://www.arduino.cc/reference/en/ |
| Ụlọ ahịa Arduino | https://store.arduino.cc/ |
Akụkọ ngbanwe
| Ụbọchị | Ndozigharị | Mgbanwe |
| 04/15/2021 | 1 | Mmelite akwụkwọ data izugbe |
Akwụkwọ / akụrụngwa
 |
ARDUINO ABX00027 Nano 33 IoT Development Board [pdf] Akwụkwọ ntuziaka onye ọrụ ABX00027, Nano 33 IoT Development Board |
 |
ARDUINO ABX00027 Nano 33 IoT Development Board [pdf] Akwụkwọ ntuziaka onye ọrụ ABX00027, Nano 33 IoT Development Board |
 |
ARDUINO ABX00027 Nano 33 IoT Development Board [pdf] Akwụkwọ ntuziaka onye ọrụ ABX00027, Nano 33 IoT Development Board, ABX00027 Nano 33 IoT Development Board |
