Ai-Thinker RA-01SC-P LoRa Series Module Owner's Manual

The Ra-01SC-P is an electrostatic sensitive device. Special
precautions are required when handling it. Avoid touching the
module with bare hands and use antistatic measures during
ire ere.

Àgwà ọkụ eletrik

FAQ

Q: What precautions should I take when handling the Ra-01SC-P
modul?

A: The Ra-01SC-P is electrostatic sensitive, so always use
proper ESD handling procedures to prevent damage.

View Fullscreen

Ra-01SC-P Specification V1.0.0

Ra-01SC-P Specification

Ibe 1 nke 21

malitegharịa akwụkwọ

Ra-01SC-P Specification V1.0.0

Ụdị

Ụbọchị

V1.0.0 2024.09.24

Zụlite/megharịa ọdịnaya Mbipụta mbụ

Mbipụta Pengfei Dong

Kwado Ning Guan

Ibe 2 nke 21

Ra-01SC-P Specification V1.0.0
Ọdịnaya
1. Ngwaahịa agwụlaview………………………………………………………………………………………………………………………………………… 4 1.1. Njirimara …………………………………………………………………………………………………………………………………………………………………………
2. Isi akụkụ……………………………………………………………………………………………………………………………………………………… Chọrọ ọkụ eletrik static ………………………………………………………………………………………………………………… 6 2.1. Njirimara eletrik …………………………………………………………………………………………………………………………………………
3. Nkọwa ntụtụ ………………………………………………………………………………………………………………………………………………………… 8 4. Ntuzi aka imebe ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………
4.1. Application Guide Circuit ………………………………………………………………………………. 11 4.2. Recommended PCB package size ……………………………………………………………………. 13 4.3. Antenna Installation……………………………………………………………………………………….. 13 4.4. Power supply ………………………………………………………………………………………………… 13 4.5. GPIO level conversion …………………………………………………………………………………… 14 5. DAQ ……………………………………………………………………………………………………………………… 15 5.1. Factors affecting transmission distance…………………………………………………………….. 15 5.2. Module usage precautions ………………………………………………………………………………. 15 5.3. Factors that interfere with the module………………………………………………………………. 15 6. Storage conditions …………………………………………………………………………………………………… 16 7. Reflow soldering curve ……………………………………………………………………………………………. 16 8. Product packaging information ……………………………………………………………………………….. 17 9. Contact us …………………………………………………………………………………………………………….. 17 Disclaimer and Copyright Notice………………………………………………………………………………….. 20 Notice ……………………………………………………………………………………………………………………….. 20 Important statement…………………………………………………………………………………………………….. 21

Ibe 3 nke 21

Ra-01SC-P Specification V1.0.0
1. Ngwaahịa agwụlaview
Ra-01SC-P is a LoRa series module designed and developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is used for ultra-long distance spread spectrum communication. Its RF chip LLCC68+ mainly uses LoRaTM long-range modem, which is used for ultra-long distance spread spectrum communication, has strong anti-interference ability, and can minimize current consumption. With the help of SEMTECH’s LoRaTM patented modulation technology, the module has built-in power amplifier (PA) na obere mkpọtụ amplifier (LNA) on this technology, with high sensitivity exceeding -137dBm, long transmission distance and high reliability. At the same time, compared with traditional modulation technology, LoRaTM modulation technology also has obvious advantages in anti-blocking and selection, solving the problem that traditional design solutions cannot take into account distance, anti-interference and power consumption at the same time.
It can be widely used in automatic meter reading, home building automation, security systems, remote irrigation systems, etc.

Ibe 4 nke 21

Ra-01SC-P Specification V1.0.0
1.1. Njirimara
LoRa® modulation modes Support frequency band 410MHz~525MHz Maximum transmit power, operating current 700mA High sensitivity: as low as -137dBm@SF10 125KHz Extremely small size 17*16*3.2(±0.2)MM, double-row stamp hole patch package Support spread factor SF5/SF6/SF7/SF8/SF9/SF10/SF11 Low power consumption in receiving state, with a minimum receiving current of 11mA The module uses SPI interface, half-duplex communication, with CRC, and a data packet
engine of up to 256 bytes Support multiple antenna installation methods, compatible with half-hole
mpe mpe akwa / site na oghere oghere / njikọ IPEX

Ibe 5 nke 21

Ra-01SC-P Specification V1.0.0

2. Isi paramita

Isiokwu 1 Nkọwa nke isi paramita

Ngwungwu Model
Ogo Antenna Ugboro Na-arụ ọrụ okpomọkụ Nchekwa okpomọkụ ike ọkọnọ interface ọnụ ọgụgụ bit programmable

Ra-01SC-P SMD-16 17*16*3.2(±0.2)mm Compatible with half-hole pad/through-hole pad/IPEX connector 410MHz~525MHz -40~ 85 -40~ 125, < 90%RH Supply voltage 3.0 ~ 3.6V, ahụkarị uru 3.3V, current1A SPI Ruo 300kbps

2.1. Ihe achọrọ ọkụ eletrik static
Ra-01SC-Pis an electrostatic sensitive device. Therefore, you need to take special precautions when carrying it.

Ọgụgụ 2 ESD usoro mgbochi
Notice: The Ra-01SC-P module is an electrostatic sensitive device (ESD) and requires special ESD precautions that should generally be applied to ESD sensitive groups. Proper ESD handling and packaging procedures must be used throughout the handling, transportation, and operation of any application incorporating the Ra-01SC-P module. Do not touch the module with your hands or use a non-antistatic soldering iron for soldering to avoid damaging the module.

Ibe 6 nke 21

Ra-01SC-P Specification V1.0.0

2.2. Njirimara eletrik
Tebụl 2 Tebụl njirimara eletrik

Parameters Power supply voltagihe 3V3

Min.

Ụdị

Oke.

Nkeji

uru

3.0

3.3

3.6

Ọkwa dị elu nke IO (VOH)

0.9 * VDIO

–

VDDIO

Ọkwa dị ala (VOL) mmepụta IO

–

0.1 * VDIO

Ọkwa dị elu ntinye IO (VIH)

0.7 * VDIO

–

VDDIO+0.3

Ntinye IO dị ala (VIL)

-0.3

–

0.3 * VDIO

(RF_EN/CPS) Ntinye ntinye dị elu

1.2

–

3.6

(RF_EN/CPS) Ntinye ntinye dị ala

–

0.3

Tebụl 3 SPI njirimara interface

Nkọwapụta akara

Ọnọdụ

Fsck SCK ugboro

–

tch SCK oge dị elu

–

tcl SCK obere oge

–

trise

SCK oge ebili

–

tfall

SCK ọdịda oge

–

setup thold tnsetup

Oge nhazi MOSI MOSI jide oge NSS ntọlite oge

Site na mgbanwe MOSI gaa na SCK na-arị elu
Site na SCK na-arị elu ruo mgbanwe MOSI
Site na NSS na-adaba na SCK na-arị elu

jide

NSS jide oge

Site na SCK na-adaba na NSS na-arị elu, nkịtị
ọnọdụ

Min. 50 50 30
30
100

Ahụkarị uru
5 -
–
–
–

Oke. 10 -
–
–

Nkeji MHz
ns ns ns ns ns ns
ns
ns

ukwu

NSS high time of SPI access interval

–

T_DATA DATA jide na

–

250

–

oge nhazi

Fsck SCK ugboro

–

Ibe 7 nke 21

Ra-01SC-P Specification V1.0.0

3. Nkọwa pin
The Ra-01SC-P module has a total of 16 pins, as shown in the pin diagram. The pin function definition table is the interface definition.

Nọmba 1 2 3 4
5
6 7 8 9 10
11
12 13 14 15 16 EPAD

Aha ANT GND 3V3 nrụpụta
CPS
DIO1 DIO2 DIO3 GND ọrụ
RF_EN
SCK MISO MOSI NSS GND GND

Tebụl 4 Nkọwa nkọwa ọrụ ntụtụ
Arụ ọrụ Jikọọ antenna Ground Uru 3.3V ike ọkọnọ Tọgharia pin FEM mgbawa TX gafere-site na-enyere pin, na nnyefe mode, ntụtụ a dị ala larịị RF na-apụta ozugbo na-enweghị PA. amplification, and is internally pulled up by default
Nhazi ngwanrọ IO1 dijitalụ
Nhazi ngwanrọ IO2 dijitalụ
Digital IO3 software configuration Ground Status indication pin FEM chip enable pin, high level is effective, the module is pulled up by default; High level is in working state, low level is in sleep state
Ntinye elekere SPI
Mbupute data SPI
Ntinye data SPI
SPI chip select input Ground Ground, reliable grounding is required to facilitate heat dissipation

Ibe 8 nke 21

Ra-01SC-P Specification V1.0.0

The general IO pins of LLCC68+ are available in LoRaTM mode. Their mapping relationship depends on the configuration of the two registers RegDioMapping1 and RegDioMapping2.
Tebụl 5 IO ọdụ ụgbọ mmiri na-arụ ọrụ eserese

Ọrụ DIOx

Ụdị

Maapụ

DIO3 CadDone

01 niile

Isi okwu bara uru

Ịkwụ ụgwọCrc 10
Njehie

–

DIO2
Fhss Gbanwee ọwa
Fhss Gbanwee ọwa
Fhss Gbanwee ọwa
–

DIO1
RxRimeout Fhss
Gbanwee CadDetected Channel
–

Ibe 10 nke 21

Ra-01SC-P Specification V1.0.0

4. Ntuzi aka imewe

4.1. Ntuziaka ntuziaka ngwa

1 Special pin description About CPS pin

CPS bụ TX ngafe-site na ntụtụ njikwa nke mgbawa PA wuru n'ime modul ahụ, ya na ihe mgbochi ndọghachi azụ nke 10K (ya bụ, RF dị na PA). ampọnọdụ mmepụta ọkụ na ọnọdụ nnyefe ndabara). Mgbe modul dị na ọnọdụ nnyefe:
Ntụtụ a dị elu, yana RF nke modul bụ ampkwadoro na mmepụta site na PA;
Mgbe ntụtụ a dị ala, RF nke modul na-apụta ozugbo na-enweghị ampnke PA kwadoro;
Echiche nke ntụtụ a adịghị mma na steeti nnata ma ọ dị mkpa ka edobe ya na ọkwa dị ala mgbe obere ike oriri;
Ihe dị ka ntụtụ RF_EN

RF_EN bụ pin na-enyere aka nke modul PA mgbawa arụnyere n'ime ya. Mgbe ntụtụ ahụ dị elu, RF nke modul ahụ nọ na ọnọdụ transceiver nkịtị; mgbe ntụtụ ahụ dị ala, arụ ọrụ RF nke modul ahụ na-agbanyụ, nke nwere ike ibelata oriri ike modul.
Tebụl 6 RF mgbanwo tebụl eziokwu

Ụdị FEM na-eme ka FEM na-arụ ọrụ

RF_EN 0 1

The module defaults to BOM, CPS and RF_EN have internal pull-up resistors of 10K (i.e., they are in normal amplification and transceiver state by default). If a low-power working scenario is required, please use an external MCU to control this pin to a low level state. When the level is low, the default pull-up resistor of this pin may have leakage current. If the built-in pull-up resistor is not required, please contact Anxin to modify the BOM.

Na nchịkọta, modul nwere nhazi BOM abụọ.

Nhazi 1. CPS na RF_EN nwere wuru na-adọta-elu resistors nke 10K (ndabara BOM nhazi)

Nhazi 2. CPS na RF_EN nwere arụnyere na-adọta-elu resistors na-enweghị ịrịgo, na-achọ IO ọdụ ụgbọ mmiri nke mpụta MCU.

Ibe 11 nke 21

2 Sekit ngwa a na-ahụkarị

Ra-01SC-P Specification V1.0.0

It is recommended that the IO port of the external MCU control the CPS and RF_EN of the module to achieve low-power application scenarios.
3 Other instruction The communication interface with the master MCU, in addition to the SPI interface, also
kwesịrị ijikọ BUSY/DIO1 na ọdụ ụgbọ mmiri IO nke nna ukwu MCU.
A na-ere antenna na bọọdụ njikwa. A na-atụ aro ka idobe sekit dabara adaba n'ụdị achịcha na interface antenna.

Ibe 12 nke 21

4.2. Nha ngwugwu PCB akwadoro

Ra-01SC-P Specification V1.0.0

4.3. Nwụnye antenna
Ra-01SC-P requires an external antenna. There is a half-hole pad on the module that can be connected to the mainboard.
Ka antenna wee nweta mmetụta kachasị mma, a ga-etinye antenna n'akụkụ akụkụ ígwè.
The antenna installation structure has a great impact on the performance of the module. Make sure that the antenna is exposed, preferably vertically upward. When the module is installed inside the casing, use a high-quality antenna extension cable to extend the antenna to the outside of the casing.
Agaghị etinye antenna n'ime mkpuchi igwe, nke ga-ebelata oke nnyefe.
4.4. Ịnye ọkụ
Kwadoro 3.3V voltage, peak current above 1A. If using DC-DC, it is recommended to control the ripple within 100mV. It is recommended to reserve a position for dynamic response capacitors in the DC-DC
power supply circuit, which can optimize the output ripple when the load changes greatly. It is recommended to add ESD devices to the 3.3V power supply interface. When designing the power supply circuit for the module, it is recommended to retain more
than 30% of the power supply current margin, which is conducive to long-term stable operation of the whole machine. Please pay attention to the correct connection of the positive and negative poles of the power supply. Reverse connection may cause permanent damage to the module.

Ibe 13 nke 21

Ra-01SC-P Specification V1.0.0
4.5. Ntughari ọkwa GPIO
Some IO ports are connected to the module. If you need to use them, it is recommended to connect a 10-100 ohm resistor in series to the IO ports. This can suppress overshoot and make the levels on both sides more stable. It is helpful for EMI and ESD.
Maka ịdọrọ na nkwụsị nke ọdụ ụgbọ mmiri IO pụrụ iche, biko rụtụ aka na ntuziaka dị na nkọwapụta, nke ga-emetụta nhazi mmalite nke modul.
The IO port of the module is 3.3V. If the IO port levels of the main control and the module do not match, a level conversion circuit needs to be added.
If the IO port is directly connected to a peripheral interface, or terminals such as a pin header, it is recommended to reserve ESD devices near the terminals in the IO port routing.

Ibe 14 nke 21

Ra-01SC-P Specification V1.0.0

5. FAQ

5.1. Ihe na-emetụta anya nnyefe
Mgbe enwere mgbochi nzikọrịta ozi kwụ ọtọ, a ga-ebelata anya nzikọrịta ozi ya.
Okpomọkụ, iru mmiri, na nnyonye anya ọnụ ọgụgụ ugboro ga-eduga n'ịbawanye ọnụego mfu ngwugwu nzikọrịta ozi.
The ground absorbs and reflects radio waves, so the test effect is poor near the ground. Seawater has a strong ability to absorb radio waves, so the test effect is poor at the seaside. If there are metal objects near the antenna, or it is placed in a metal shell, the signal
attenuation will be very serious. The power register is set incorrectly, and the air rate is set too high (the higher the air rate,
the closer the distance). The power supply low voltage na ụlọ okpomọkụ dị ala karịa uru akwadoro.
Nke dị ala voltage, the lower the power. The antenna used is poorly matched with the module or the antenna itself has quality
nsogbu.

5.2. Akpachara anya iji modul
Lelee ọkụ eletrik iji hụ na ọ dị n'ime ọkụ ọkụ akwadoro voltage. Ọ bụrụ na ọ gafere oke uru, modul ga-emebi kpamkpam.
Lelee nkwụsi ike nke ọkụ eletrik. Voltage enweghị ike ịgbanwe ugboro ugboro na nke ukwuu.
Gbaa mbọ hụ na ọ na-arụ ọrụ mgbochi static n'oge ntinye na ojiji, yana akụkụ dị elu na-enwe mmetụta nke electrostatically.
Gbaa mbọ hụ na iru mmiri n'oge ntinye na ojiji adịghị oke oke. Akụkụ ụfọdụ bụ ngwaọrụ nwere mmetụta iru mmiri.
Ọ bụrụ na enweghị ihe pụrụ iche chọrọ, a naghị atụ aro ka iji ya na oke okpomọkụ ma ọ bụ dị ala.

5.3. Ihe ndị na-egbochi modul
Enwere nnyonye anya site na otu mgbaama ugboro dị nso, nọrọ na ebe nnyonye anya ma ọ bụ gbanwee ugboro ma ọ bụ ọwa ka ịzenarị nnyonye anya.
Ụdị elekere elekere na SPI abụghị ọkọlọtọ, lelee ma enwere nnyonye anya na ahịrị SPI, na ahịrị ụgbọ ala SPI ekwesịghị ịdị ogologo.
Ọkụ ọkụ na-adịghị mma nwekwara ike ịkpata koodu garbled, ya mere, a ghaghị ijide n'aka na ntụkwasị obi nke ọkụ eletrik.
Ahịrị ndọtị na-adịghị mma ma ọ bụ ogologo ogologo ma ọ bụ ahịrị feeder ga-ebutekwa ọnụego mperi dị elu.

Ibe 15 nke 21

Ra-01SC-P Specification V1.0.0
6. Ọnọdụ nchekwa
Ekwesịrị ịchekwa ngwaahịa ndị etinyere n'ime akpa na-enweghị mmiri n'ime ikuku na-adịghị mma nke <40/90% RH. Ọkwa mmetụta uche nke modul nke MSL bụ ọkwa 3. Mgbe agbachichara akpa oghere ahụ, a ga-eji ya n'ime awa 168 na 25 ± 5/60% RH, ma ọ bụghị ya, ọ ga-adị mkpa ka akpọọ nkụ tupu etinye ya na ntanetị ọzọ.
7. Reflow soldering curve

Ọgụgụ 12 Ntugharị ụzọ mgbanaka nrụgharị

Ibe 16 nke 21

Ra-01SC-P Specification V1.0.0
8. Ozi nkwakọ ngwaahịa
As shown in the figure below, the packaging of Ra-01SC-P is braided tape, 800pcs/reel. As shown in the figure below:

13 Nkwakọ ngwaahịa na eserese

9. Kpọtụrụ anyị

Onye ọrụ Ai-Thinker websaịtị

Nzukọ ụlọ ọrụ

Mepụta DOCS

LinkedIn Technical

Tmall shop support

Ụlọ ahịa Taobao

Ụlọ ahịa Alibaba

emailsupport@aithinker.com

Ụlọ

azụmahịa

Cooperationsales@aithinker.com

Mmekọrịta azụmahịa nke mba ofesioverseas@aithinker.com

Ụlọ ọrụ Adreesị Ụlọ ọrụ 403-405,408-410, Block C, Huafeng Smart Innovation Port, Gushu 2nd Road, Xixiang, Baoan District, Shenzhen.

Tel+86-0755-29162996

WeChat Obere mmemme

WeChat akaụntụ ọrụ

Ibe 17 nke 21

Ra-01SC-P Specification V1.0.0
Nkwachapụta na Nwebiisinka
Ihe omuma banyere akwukwo a, tinyere URL adreesị maka ntụnye aka, enwere ike ịgbanwe n'enweghị ọkwa. Enyere akwụkwọ ahụ "dị ka ọ dị" na-enweghị akwụkwọ ikike ọ bụla, gụnyere akwụkwọ ikike ịzụ ahịa ọ bụla, mma maka otu ebumnuche ma ọ bụ enweghị mmebi, yana akwụkwọ ikike ọ bụla a kpọtụrụ aha n'ebe ọzọ na atụmatụ ọ bụla, nkọwapụta ma ọ bụ s.ample. Akwụkwọ a anaghị ewere ụgwọ ọ bụla, gụnyere ụgwọ maka mmebi nke ikike patent ọ bụla sitere na iji ozi dị na akwụkwọ a. Akwụkwọ a enyeghị ikike ikike ikike ọgụgụ isi ọ bụla, ma ọ bụ nke egosipụtara ma ọ bụ nke egosipụtara, site na estoppel ma ọ bụ nke ọzọ. Data ule enwetara n'isiokwu a bụ nke Ai-Thinker Laboratory nwetara, na nsonaazụ ya nwere ike ịdị iche iche. Aha ahia niile, ụghalaahịa na ụghalaahịa edenyere n'akwụkwọ akụkọ a bụ ihe onwunwe nke ndị nwe ha ma ekwupụtakwa ya. Ikike ikpeazụ nke nkọwa bụ nke Shenzhen Ai-Thinker Technology Co., Ltd.
Mara
Enwere ike ịgbanwe ọdịnaya nke akwụkwọ ntuziaka a n'ihi nkwalite ụdị ngwaahịa ma ọ bụ ihe ndị ọzọ. Shenzhen Ai-Thinker Technology Co., Ltd. nwere ikike ịgbanwe ọdịnaya nke akwụkwọ ntuziaka a na-enweghị ọkwa ọ bụla ma ọ bụ ncheta ọ bụla. A na-eji akwụkwọ ntuziaka a naanị dịka ntuziaka. Shenzhen Ai-Thinker Technology Co., Ltd. na-agba mbọ ike ya iji nye ozi ziri ezi na akwụkwọ ntuziaka a, mana Shenzhen Ai-Thinker Technology Co., Ltd. anaghị achọpụta na ọdịnaya nke akwụkwọ ntuziaka ahụ enweghị njehie kpamkpam, na nkwupụta niile, ozi na aro dị na akwụkwọ ntuziaka a anaghị emepụta akwụkwọ ikike ọ bụla ma ọ bụ nke pụtara.

Ibe 20 nke 21

Ra-01SC-P Specification V1.0.0
Okwu dị mkpa
Ai-Thinker nwere ike ịnye data teknụzụ na ntụkwasị obi “dị ka ọ dị” (gụnyere mpempe akwụkwọ data), akụrụngwa imewe (gụnyere imewe maka ebumnuche ntụaka), ngwa ma ọ bụ ndụmọdụ ndị ọzọ, ngwaọrụ netwọkụ, ozi nchekwa na akụrụngwa ndị ọzọ (“ihe ndị a”) na enweghị akwụkwọ ikike na-enweghị akwụkwọ ikike awara awara ma ọ bụ enweghị nkọwa, gụnyere enweghị oke, mgbanwe maka otu ebumnuche ma ọ bụ mmebi ikike ikike ọgụgụ isi nke ndị ọzọ. Ma na-ekwupụta kpọmkwem na ọ gaghị akwụ ụgwọ maka mfu ọ bụla a na-apụghị izere ezere ma ọ bụ na mberede na-esite na ngwa ma ọ bụ iji ngwaahịa na sekit ụlọ ọrụ ọ bụla.
Ai-Thinker nwere ikike nke ozi ewepụtara na akwụkwọ a (gụnyere ma ọnweghị oke na egosi na nkọwa ngwaahịa) yana mgbanwe ọ bụla na ụlọ ọrụ na-enweghị ọkwa iji dochie anya ma dochie ozi niile enyere na ụdị gara aga nke otu akwụkwọ nọmba akwụkwọ.
Ihe ndị a dị maka ndị mmepe nwere nkà bụ ndị na-emepụta ngwaahịa Essence. Ị ga-eburu ibu ọrụ niile maka ndị a: (1) họrọ ngwaahịa nhọrọ kwesịrị ekwesị maka ngwa gị; (2) chepụta, nyochaa ma mee ngwa gị na ngwaahịa gị n'oge usoro ndụ zuru oke; na (3) hụ na ngwa gị zutere ụkpụrụ, ụkpụrụ na iwu, yana ọrụ ọ bụla ọzọ.
Ai-Thinker na-enye gị ikike iji akụrụngwa ndị a naanị maka ngwa ngwaahịa Ai-Thinker akọwara na akụrụngwa a. Na-enweghị ikike nke Ai-Thinker, ọ nweghị otu ma ọ bụ onye ọ bụla ga-eṅomi ma ọ bụ detuo akụkụ ma ọ bụ ihe niile ndị a na-enweghị ikike, ma ghara ịgbasa ha n'ụdị ọ bụla. Ịnweghị ikike iji onye isi ụlọ akwụkwọ ọ bụla ma ọ bụ akụ ọgụgụ isi nke ndị ọzọ. Ị ga-akwụ gị ụgwọ n'ụzọ zuru ezu maka ebubo, mmebi, akwụ ụgwọ, mfu na ụgwọ ọ bụla ewepụtara site na iji akụrụngwa ndị a.
Ngwaahịa ndị Ai-Thinker dị nọ n'okpuru usoro ahịa ma ọ bụ usoro ndị ọzọ nwere ike itinye na ngwaahịa ahụ. Ai-Thinker nwere ike ịnye akụrụngwa ndị a agaghị agbatị ma ọ bụ gbanwee akwụkwọ ikike dị mkpa ma ọ bụ akwụkwọ ikike maka ntọhapụ ngwaahịa ahụ.

Ibe 21 nke 21

FCC ỊDỌ AKA NA NTỊ FCC Akpachara anya: Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa a. Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị. Ngwaọrụ a na antenna (s) agaghị ejikọta ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ. 15.105 ozi nye onye ọrụ. (b) Maka ngwaọrụ dijitalụ klaasị B ma ọ bụ ihe dị n'akụkụ, ntuziaka enyere onye ọrụ ga-agụnye nkwupụta ndị a ma ọ bụ yiri ya, etinye ya n'ebe a ma ama na ederede akwụkwọ ntuziaka: Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio na, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ gbalịa dozie nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a: -Reorient ma ọ bụ bugharịa antenna nnata. -Mbawanye nkewa n'etiti akụrụngwa na nnata. -Jikọọ akụrụngwa n'ime oghere dị na sekit dị iche na nke ejikọrọ onye nnata. - Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka. Ngwa a na-akwado oke ikpughe radieshon FCC nke edobere maka gburugburu ebe anaghị achịkwa ya. Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na opekempe 20cm n'etiti radiator na ahụ gị. Nkwupụta Ngosipụta Radiation: Akụrụngwa a na-akwado oke mkpughe radieshon FCC ewepụtara maka gburugburu enweghị njikwa.

Agaghị ejikọta nnyefe a ma ọ bụ na-arụ ọrụ na njikọ ọ bụla ọzọ
antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. The final end product must be labelled in a visible area with the following: “Contains Transmitter Module “FCC ID: 2ATPO-RA01SCP”

Ihe achọrọ n'otu KDB996369 D03 2.2 Ndepụta iwu FCC dị mkpa Depụta iwu FCC nke dị na nnyefe modular. Ndị a bụ iwu ndị na-ewepụta kpọmkwem eriri arụ ọrụ, ike, ihe ndị na-adịghị ọcha, na arụ ọrụ ugboro ugboro. Edepụtala nnabata na iwu radieshon na-amaghị ama (Nkebi nke 15 Nkebi nke B) ebe ọ bụ na nke ahụ abụghị ọnọdụ nke onyinye modul nke agbatịkwuru onye nrụpụta ụlọ. Hụkwa Nkebi 2.10 n'okpuru gbasara mkpa ọ dị ịgwa ndị na-emepụta ihe na-enyocha ule ọzọ.
2.3 Kọwaa ọnọdụ ojiji arụ ọrụ akọwapụtara
Kọwaa ọnọdụ ojiji nke dabara na modul transmitter, gụnyere maka exampnwere oke ọ bụla na antennas, wdg. Maka example, ma ọ bụrụ na-eji eri-point-point antenna nke chọrọ mbelata ike ma ọ bụ akwụ ụgwọ maka ọnwụ USB, mgbe ahụ ozi a ga-adị na ntuziaka. Ọ bụrụ na mmachi ọnọdụ ojiji agbatịkwuru ndị ọrụ ọkachamara, ntuziaka ga-ekwupụtarịrị na ozi a gbatịkwara na ntuziaka ntuziaka onye nrụpụta. Na mgbakwunye, enwere ike ịchọ ụfọdụ ozi, dị ka uru kacha elu kwa otu ugboro yana uru kacha nta, kpọmkwem maka ngwaọrụ nna ukwu na band 5 GHz DFS. Nkọwa: antenna ngwaahịa na-eji antenna na-enweghị ike dochie ya nwere uru 1dBi 2.4 Single Modular.
Ọ bụrụ na akwadoro transmitter modular dị ka “Otu Modular,” mgbe ahụ onye nrụpụta modul bụ ọrụ maka ịkwado ebe nnabata nke Single Modular na-eji. Onye nrụpụta otu Modular ga-akọwarịrị, ma na ntinye akwụkwọ ma na ntuziaka nrụnye, ihe ọzọ pụtara na onye nrụpụta Single Modular na-eji enyocha na onye ọbịa ahụ na-emezu ihe achọrọ iji meju ọnọdụ mmachi modul. Otu onye na-emepụta Modular nwere ike ime mgbanwe iji kọwapụta usoro ọzọ ya iji lebara ọnọdụ ndị na-amachi nnabata mbụ, dị ka: mkpuchi, akara ngosi kacha nta. amplitude, ndenye modulation / ntinye data, ma ọ bụ ụkpụrụ inye ọkụ. Usoro ọzọ nwere ike ịgụnye nke ahụ nwere oke

modul emeputa reviews zuru ezu data ule ma ọ bụ onye ọbịa chepụta tupu inye onye na-emepụta nnabata nnabata. Usoro Modular Otu a dịkwa maka nlebanya mkpughe RF mgbe ọ dị mkpa iji gosipụta nnabata n'otu ndị ọbịa. Onye nrụpụta modul ga-ekwupụtarịrị ka a ga-esi na-edobe njikwa ngwaahịa nke a ga-etinye modul transmitter n'ime ya ka a na-ahụta nrubeisi zuru oke nke ngwaahịa mgbe niile. Maka ndị ọbịa ndị ọzọ na-abụghị ndị ọbịa akọwapụtara nke enyere ya na modul nwere oke, achọrọ mgbanwe na-enye ohere klaasị II na onyinye modul iji debanye aha ndị ọbịa ọzọ dị ka onye nnabata akwadoro na modul ahụ. Nkọwa: Modul bụ otu modul. 2.5 Nhazi antenna trace Maka onye na-ebufe modular nwere atụmatụ antenna trace, lee ntuziaka dị na Ajụjụ 11 nke KDB Publication 996369 D02 FAQ Modules maka Micro-Strip Antennas na trace. Ozi mwekota ga-agụnye maka TCB review ntuziaka nchikota maka akụkụ ndị a: nhazi nhazi nke trace, ndepụta akụkụ (BOM), antenna, njikọ, na ihe dịpụrụ adịpụ chọrọ.
a) Ozi nke gụnyere ndịiche anabatara (dịka ọmụmaatụ, oke oke, ọkpụrụkpụ, ogologo, obosara, udi (s), dielectric na-adịgide adịgide, na impedance dị ka ọdabara maka ụdị antenna ọ bụla); b) A ga-ewere ụdị ọ bụla dị ka ụdị dị iche iche (dịka ọmụmaatụ, ogologo antenna n'ọtụtụ (s) nke ugboro ole, ogologo wavelength, na udi antenna (nzọpụta na usoro) nwere ike imetụta uru antenna na a ga-atụle ya); c) A ga-enye ihe ndị ahụ n'ụzọ na-enye ndị na-emepụta ihe ohere ịmepụta nhazi osisi sekit (PC) ebipụtara; d) Akụkụ kwesịrị ekwesị site na ndị nrụpụta na nkọwapụta; e) Usoro nyocha maka nkwenye imewe; na f) Usoro nnwale mmepụta maka ịgba mbọ hụ na nnabata
Onye na-enye modul ahụ ga-enye ọkwa na ngbanwe (s) ọ bụla sitere na paramita akọwapụtara nke eriri antenna, dị ka akọwapụtara na ntuziaka ahụ, chọrọ ka onye nrụpụta ngwaahịa ga-agwa onye na-enye modul ahụ na ha chọrọ ịgbanwe nhazi akara antenna. N'okwu a, a chọrọ ngwa mgbanwe klaasị II ka ọ bụrụ filed site n'aka onye nyere ya, ma ọ bụ onye nrụpụta ụlọ nwere ike iburu ọrụ site na mgbanwe na FCC ID (ngwa ọhụrụ) usoro na-esote klaasị II ngwa mgbanwe na-ekwe ka 2.6 RF echiche ekpughere Ọ dị mkpa maka ndị na-enye modul iji kwupụta n'ụzọ doro anya na n'ụzọ doro anya ọnọdụ mkpughe RF nke na-enye onye nrụpụta ngwaahịa nnabata ohere iji modul. Ụdị ntuziaka abụọ ka achọrọ maka ozi mkpughe RF: (1) nye ndị na-emepụta ngwaahịa, iji kọwapụta ọnọdụ ngwa (mkpanaka, obere xx cm site na ahụ mmadụ); na (2) ederede ọzọ achọrọ

maka ndị na-emepụta ngwaahịa ndị ọbịa iji nye ndị ọrụ njedebe na akwụkwọ ntuziaka njedebe ngwaahịa ha. Ọ bụrụ na enyeghị nkwupụta mkpughe RF na ọnọdụ ojiji, mgbe ahụ, a chọrọ onye nrụpụta ngwaahịa nnabata ka ọ buru ọrụ nke modul site na mgbanwe na FCC ID (ngwa ọhụrụ).
Explanation: The module complies with FCC radiofrequency radiation exposure limits for uncontrolled environments. The device is installed and operated with a distance of more than 20 cm between the radiator and your body.” This module follows FCC statement design, FCC ID: 2ATPO-RA01SCP 2.7 Antennas
A ga-enwerịrị ndepụta antennas etinyere na ngwa maka asambodo na ntuziaka. Maka ndị na-ebugharị modular akwadoro dị ka modul nwere oke, ntuziaka onye nrụnye ọkachamara niile ga-etinyerịrị dịka akụkụ nke ozi nye ndị nrụpụta ngwaahịa. Ndepụta antenna ga-achọpụtakwa ụdị antenna (monopole, PIFA, dipole, wdg) (rịba ama na maka ex.ampA naghị ewere antenna "omni-directional antenna" dị ka otu "ụdị antenna"). Maka ọnọdụ ebe onye nrụpụta ngwaahịa na-ahụ maka njikọ mpụga, maka exampN'iji ntụtụ RF na nchọta antenna, ntuziaka ntinye ga-agwa onye nrụnye na a ga-eji njikọ antenna pụrụ iche na mpaghara 15 ikike ikike ejiri na ngwaahịa nnabata.

The module manufacturers shall provide a list of acceptable unique connectors. Explanation: The product antenna uses an irreplaceable antenna with a gain of 1dBi 2.8 Label and compliance information Grantees are responsible for the continued compliance of their modules to the FCC rules. This includes advising host product manufacturers that they need to provide a physical or e-label stating “Contains FCC ID” with their finished product. See Guidelines for Labeling and User Information for RF Devices KDB Publication 784748. Explanation: The host system using this module, should have label in a visible area indicated the following texts: “Contains FCC ID: 2ATPO-RA01SCP 2.9 Information on test modes and additional testing requirements5 Additional guidance for testing host products is given in KDB Publication 996369 D04 Module Integration Guide. Test modes should take into consideration different operational conditions for a stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product. The grantee should provide information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host. Grantees can increase the utility of their modular transmitters by providing special means, modes, or instructions that simulates or characterizes a connection by enabling a transmitter. This can greatly simplify a host manufacturer’s determination that a module as installed in a host complies with FCC requirements. Explanation: Shenzhen Ai-Thinker Technology Co., Ltd can increase the utility of our modular transmitters by providing instructions that simulates or characterizes a connection by enabling a transmitter. 2.10 Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product

dị ka akụkụ nke 15 nke subpart B (mgbe ọ nwekwara ihe na-amaghị ama-radiator dijitalụ circuity), mgbe ahụ onye nyere ya ga-enye ọkwa na-ekwupụta na ngwaahịa ikpeazụ nke ikpeazụ ka chọrọ nnwale nnabata nke akụkụ 15 nke ngalaba B na ntinye modul arụnyere. Nkọwa: Modul na-enweghị n'amaghị ama-radiator dijitalụ circuity, ya mere modul achọghị nyocha site FCC Nkebi 15 Nkebi nke B. A ga-enyocha onye ọbịa site na FCC Subpart B.

Akwụkwọ / akụrụngwa

Ai-Thinker RA-01SC-P LoRa Series Module [pdf] Akwụkwọ ntuziaka onye nwe
RA01SCP, 2ATPO-RA01SCP, 2ATPORA01SCP, RA-01SC-P LoRa Series Module, RA-01SC-P, LoRa Series Module, Module

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

RA-01SC-P LoRa Series Module

Nkọwapụta

Ngwaahịa gafereview

Isi Parameters

Ntuziaka ojiji ngwaahịa

Achọrọ ọkụ eletrik Static

Àgwà ọkụ eletrik

FAQ

Q: What precautions should I take when handling the Ra-01SC-P
modul?

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi

RA-01SC-P LoRa Series Module

Nkọwapụta

Ngwaahịa gafereview

Isi Parameters

Ntuziaka ojiji ngwaahịa

Achọrọ ọkụ eletrik Static

Àgwà ọkụ eletrik

FAQ

Q: What precautions should I take when handling the Ra-01SC-P modul?

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi

Q: What precautions should I take when handling the Ra-01SC-P
modul?